新產品訊息
產品訊息
結果 1 - 21 的 21
Current Sensing Metal Chip Resistor (Wide Terminal)-CSMW Series
Long-side termination (reverse-geometry) type flat chip resistor. Viking has been manufacturing Wide Terminal products for many years and is dedicated to developing a variety of Wide Terminal products. By changing the terminal electrode from the short edge to the long edge, we can enhance heat dissipation to the PCB and improve high power rating. The wide electrode construction supports good thermal cycling performance. The metal foil construction ensures stable low TCR performance and is Pb-Free to meet RoHS requirements.
閱讀更多Automotive Grade Metal Thin Film Chip Resistor –ARM..A series
ARM..A series The advanced thin film resistor with special process to ensure the life stability and resistant to moisture. Biased humidity testing at 85 °C /85% and 155°C high temperature exposure tested. High Temperature Power Derating started from 85°C. Wide resistance range up to 5.1Mohm and provide good performance of high power and high voltage.
閱讀更多Automotive Thick Film Flat Array Chip Resistor –CNF..A series
Resistor Array is composed of several independent chip resistors. It limits the current and stabilizes the voltage. It can be used as pull-up and pull-down resistors for parallel ports, simplify the PCB design and assembly. Save board space or increase PCB integration density and reduce pick and place costs.CNF ..A series products are flat type between the terminals (no convex or concave design) so they are strong in mechanical strength and are extremely resistant to damage, so usable space can be added to the design, which increases the effective area of the resistor body, so that is better electrical characteristics. Same land patterns as concave or convex type. No need to redesign on PCB. High power is available.
閱讀更多Important products: Tantalum Nitride (TaN) Thin Film Precision Chip Resistor -TAR Series
The TaN (tantalum nitride) film is a moisture impervious tantalum pentoxide barrier layer that can against high relative humidity. TaN is much robust withstand high humidity with voltage applied than NiCr. It can pass thousands biased humidity testing at 85 °C /85% relative humidity . it produces a very stable, protective oxide layer, an ideal choice for a wide range of applications requiring precision resistors with long term stability, reliability, and critical environmental.
閱讀更多High Power Thin Film Chip Resistors 1206 1W-ARP Series
High Power Thin Film Chip Resistors 1206 1W
閱讀更多Thin film high voltage-ARHV..A series
Thin film high voltage-ARHV..A series * 1206,1210 Offer up to 700V-1000V voltage and provide long-term stability with special passivation. * ±25ppm/°TCR and ±0.1% resistance tolerance. * Resistance upto 3MΩGreatly reduce the number of thin film resistor for high Voltage Greatly reduce SMD costs , Saving PCB space or increase PCB integration density Higher application reliability by reducing the number of solder joints
閱讀更多High Frequency upto 40GHz thin film precision resistor-ARF series
ARF series chip resistors are designed with low internal reactance. The thin film technology applied to resistors is appropriated to reduce the parasitic inductance and capacitance. Low internal reactance allows these devices to keep a very good resistor behavior in high frequencies．Applications
閱讀更多Long Termination Thick Film Resistor- CRW Series
The resistors are constructed in a ceramic based (aluminum oxide). Long-side termination (reverse-geometry) type flat chip resistor, robust design is major concern, provide a shorter path for heat dissipation to the PCB, enhance high power rating, Wide electrode construction supports good thermal cycling performance. The composition of the paste is adjusted to give the approximate resistance required and is trimmed to nominated value by laser trimmer.
閱讀更多Ultra Low Resistance Metal Alloy Jumper-LRJ series
Metal alloy 0 ohm jumper resistor for ultra low resistance under 0.5mohm for sizes of 0402~0805, under 0.2mohm for sizes of 1206,2010 withstand high temperature for high current applications. Our LRJ seires is true metal alloy plate zero ohm resistor , a good choice of less space and low cost than DIP jumper headers. This Metal jumper is designed to extremely low impedance and profile circuit linkage as a zero ohm resistor.
閱讀更多Thick Film High Power Chip Resistor - Aluminum Nitride Substrate(ALN) –CRP Series
CRP series thick film resistor is designed on high thermal conductivity aluminum nitride substrate with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the end users’ circuit assembly. It offers effiectively heat dissipation to remove the heat to the overall performance of the devices. Enhance over 3 times more power in same size , Excellent reliability and stability. It offers High Thermal Conductivity for Power to 22 W with temperature control in 2512 Case ..
閱讀更多New Product CSRF Series- MELF High Frequency Resistor
CSRF series is a MELF resistor specially designed for high frequency applications. The general type MELF resistor uses a spiral trimming method to increase the internal inductance, CSRF uses a special non-spiral trimmed method reduced the internal reactance which caused the impedance change when the resistor used in high frequency applications, so it is very suitable for high frequency circuit design.
閱讀更多Long Termination Thick Film Resistor- CRW ..A Series
The resistors are constructed in a ceramic based (aluminum oxide). Long-side termination (reverse-geometry) type flat chip resistor, robust design is major concern, provide a shorter path for heat dissipation to the PCB, enhance high power rating, Wide electrode construction supports good thermal cycling performance. The composition of the paste is adjusted to give the approximate resistance required and is trimmed to nominated value by laser trimmer.
閱讀更多Anti-sulfur Components
Anti-Surfur resistor is using high sulfuration-proof inner electrode material and special construction of termination to increase the strength to against the sulfuration. Sulfuration occurs in the resistor with silver for inner electrode. Sulfurated environment is included as sulfur gas near hot spring or volcanos or produced through firing of raw oil, even outdoor equipment under air pollution could be affected. Silver sulfide produced through this reaction impacts the conductivity therefore resistor gets disconnected.Viking ‘s Anti-sulfurated resistors are an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.Product applications：automotive electronic components, power supplies, industrial equipment, petrochemical industry electronic equipment, network servers, sulfur detectors, telecom stations, sewage treatment facilities, etc.
閱讀更多New Product Anti-Sulfur Resistor Array (AS43/ 42/ 41/ 21 Series)
Chip Resistor Array (R Network) is single packaged device containing an array of homogeneous resistor elements. Resistor array is typically used for convenience and cost or space saving when several same resistors applied in a layout. The size can be as small as 0201,4P2R or 8P4R. AS43,AS42,AS41,AS21 Resistor Arry is using special construction of termination to increase the strength to against the sulfuration. Silver sulfide produced due to high Sulfur environment that impacts the conductivity, therefore resistor gets disconnected. Viking ‘s Anti-sulfurated resistor array is an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.
閱讀更多New Product ARN Series
ARN Series Chip resistors are designed on high thermal conductivity Aluminum Nitride substrate with enlarged backside terminations to reduce the thermal resistance. As with any high power chip resistor has good ability to remove the heat to the overall performance of the devices. Aluminum Nitride Precision Thin Film Chip Resistor-ARN Series ● High thermal conductivity aluminum nitride substrate ● High-power resistors 1206 up to 2 watts, 2512 6W soon is coming ● Offer 2x the power rating over traditional thin-film chip resistors ● Designed with enlarged backside terminations to reduce the thermal resistance ● Low TC down to 25 ppm/C ,Tight tolerance to 0.1% Please consult with us for the new product.
閱讀更多New Product 4T Series
Metal Foil is special designed for 4 terminations, Kelvin design , surface-mount ,High power and Tight Tolerance of 0.5% for critical current sensing design. This resistor covers the most widely used resistance range from 10m~20m. This technology offers an excellent Temperature Coefficient of Resistance (TCR) and high reliable, accurate current detection. Four Terminal High Precision Current Sense Resistors-4T Series
閱讀更多
結果 1 - 21 的 21
應用
