Declaración REACH - SVHC(Hsin Chu).pdf
APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, con cable de unión, anticorrosivo, MELF. Detección...
Lee masInductores de ferrita enrollados en alambre (Serie NL)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Inductor de ferrita de chip enrollado, alta corriente, disponible en tipo moldeado y tipo abierto. Tamaño pequeño hasta 0603, soldabilidad muy fuerte mediante soldadura por flujo o soldador de soldadura, soldadura por ola. Altamente resistente a golpes mecánicos y presión. Altamente confiable en entornos de cambios repentinos de temperatura y humedad. Características de super Q.
Características
- Muy buena soldabilidad mediante soldadura por ola, soldador o soldadura por flujo.
- Dimensiones altamente precisas, se pueden montar automáticamente.
- Los terminales son altamente resistentes a las fuerzas de tracción.
- Altamente resistente a golpes mecánicos y presión.
- Altamente fiable en entornos de cambios bruscos de temperatura y humedad. Características superiores de Q.
- Nivel de sensibilidad a la humedad 1 (solo NL10(C) / NL12(C))
Aplicaciones
- Televisores micro, televisores de cristal líquido, cámaras de video, videograbadoras portátiles, radios para automóviles, estéreos para automóviles, radios de cinta delgada, sintonizadores de televisión, teléfonos móviles, radio y otros dispositivos electrónicos.
Construcción
Codificación de Color
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Numeración de Piezas
Especificaciones eléctricas estándar
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Descarga de Archivos
-
- Informe RoHS
-
-
- ALCANCE
| Image | Tamaño | Tolerancia | Inductancia | Condición de prueba | DCR (Ω) máx. | IDC (A) | Q | SRF | Descarga de Archivos | Acción |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KTC51N) 
|
0603 |
±10% |
0.051 |
7.96MHz |
0.075 |
1800 |
12 |
1500 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KTC68N)
|
0603 |
±10% |
0.068 |
7.96MHz |
0.12 |
1800 |
12 |
1500 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KTC72N)
|
0603 |
±10% |
0.072 |
7.96MHz |
0.12 |
1800 |
12 |
1500 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03KTCR10)
|
0603 |
±10% |
0.1 |
7.96MHz |
0.13 |
1700 |
12 |
1150 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR12)
|
0603 |
±5% |
0.12 |
7.96MHz |
0.15 |
1700 |
12 |
1100 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR15)
|
0603 |
±5% |
0.15 |
7.96MHz |
0.15 |
1600 |
15 |
1050 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR18)
|
0603 |
±5% |
0.18 |
7.96MHz |
0.15 |
1500 |
15 |
950 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR22)
|
0603 |
±5% |
0.22 |
7.96MHz |
0.3 |
1200 |
15 |
900 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR24)
|
0603 |
±5% |
0.24 |
7.96MHz |
0.16 |
1460 |
15 |
850 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR27)
|
0603 |
±5% |
0.27 |
7.96MHz |
0.3 |
1460 |
15 |
835 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR33)
|
0603 |
±5% |
0.33 |
7.96MHz |
0.4 |
1420 |
15 |
725 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR39)
|
0603 |
±5% |
0.39 |
7.96MHz |
0.41 |
1400 |
15 |
680 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR47)
|
0603 |
±5% |
0.47 |
7.96MHz |
0.43 |
1400 |
15 |
640 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR56)
|
0603 |
±5% |
0.56 |
7.96MHz |
0.44 |
1400 |
15 |
630 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR68)
|
0603 |
±5% |
0.68 |
7.96MHz |
0.52 |
1340 |
15 |
510 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR78)
|
0603 |
±5% |
0.78 |
7.96MHz |
0.63 |
1300 |
15 |
465 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTCR82)
|
0603 |
±5% |
0.82 |
7.96MHz |
0.69 |
1200 |
15 |
460 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC1R0)
|
0603 |
±5% |
1 |
7.96MHz |
0.81 |
1100 |
15 |
320 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC1R2)
|
0603 |
±5% |
1.2 |
7.96MHz |
0.87 |
1000 |
15 |
270 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC1R5)
|
0603 |
±5% |
1.5 |
7.96MHz |
0.96 |
920 |
15 |
230 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC1R8)
|
0603 |
±5% |
1.8 |
7.96MHz |
1.1 |
900 |
15 |
210 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC2R2)
|
0603 |
±5% |
2.2 |
7.96MHz |
1.2 |
740 |
15 |
115 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC2R7)
|
0603 |
±5% |
2.7 |
7.96MHz |
1.38 |
700 |
15 |
100 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC3R3)
|
0603 |
±5% |
3.3 |
7.96MHz |
1.5 |
680 |
15 |
84 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC3R9)
|
0603 |
±5% |
3.9 |
7.96MHz |
1.5 |
600 |
15 |
75 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC4R7)
|
0603 |
±5% |
4.7 |
7.96MHz |
2.1 |
580 |
15 |
67 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC5R6)
|
0603 |
±5% |
5.6 |
7.96MHz |
2.37 |
540 |
15 |
55 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC6R8)
|
0603 |
±5% |
6.8 |
7.96MHz |
3.1 |
500 |
15 |
48 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC7R8)
|
0603 |
±5% |
7.8 |
7.96MHz |
3.35 |
460 |
15 |
40 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC8R2)
|
0603 |
±5% |
8.2 |
7.96MHz |
3.5 |
440 |
15 |
38 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL03JTC100)
|
0603 |
±5% |
10 |
7.96MHz |
4.46 |
400 |
15 |
32 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTCR47)
|
0805 |
±10% |
0.47 |
25.2MHz |
0.156 |
1400 |
14 |
850 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTCR68)
|
0805 |
±10% |
0.68 |
25.2MHz |
0.195 |
1200 |
14 |
765 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC1R0)
|
0805 |
±10% |
1 |
7.96MHz |
0.169 |
1100 |
14 |
208 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC1R2)
|
0805 |
±10% |
1.2 |
7.96MHz |
0.208 |
960 |
14 |
159 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC1R5)
|
0805 |
±10% |
1.5 |
7.96MHz |
0.221 |
920 |
14 |
159 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC1R8)
|
0805 |
±10% |
1.8 |
7.96MHz |
0.26 |
860 |
14 |
112 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC2R2)
|
0805 |
±10% |
2.2 |
7.96MHz |
0.286 |
740 |
13 |
87 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC2R7)
|
0805 |
±10% |
2.7 |
7.96MHz |
0.325 |
680 |
13 |
72 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC3R3)
|
0805 |
±10% |
3.3 |
7.96MHz |
0.364 |
620 |
12 |
70 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC3R9)
|
0805 |
±10% |
3.9 |
7.96MHz |
0.494 |
580 |
14 |
61 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC4R7)
|
0805 |
±10% |
4.7 |
7.96MHz |
0.559 |
520 |
14 |
51 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC5R6)
|
0805 |
±10% |
5.6 |
7.96MHz |
0.65 |
480 |
12 |
47 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC6R8)
|
0805 |
±10% |
6.8 |
7.96MHz |
0.884 |
420 |
14 |
46 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05KTC8R2)
|
0805 |
±10% |
8.2 |
7.96MHz |
0.949 |
400 |
13 |
33 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTC100)
|
0805 |
±5% |
10 |
2.52MHz |
1.105 |
360 |
14 |
31 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTC120)
|
0805 |
±5% |
12 |
2.52MHz |
1.17 |
340 |
14 |
30 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JTC150)
|
0805 |
±5% |
15 |
2.52MHz |
1.82 |
300 |
15 |
28 |
|
Agregar a la lista |
|---|
Aplicación
APLICACIONES MÉDICAS
Inductores de chip de alta frecuencia cerámicos, tamaño pequeño hasta 01005. Película delgada, multicapa,...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alto Q, baja TCR....
Lee mas