Declaración REACH - SVHC(Hsin Chu).pdf
APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, con cable de unión, anticorrosivo, MELF. Detección...
Lee masInductores de ferrita enrollados en alambre (Serie NL)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Inductor de ferrita de chip enrollado, alta corriente, disponible en tipo moldeado y tipo abierto. Tamaño pequeño hasta 0603, soldabilidad muy fuerte mediante soldadura por flujo o soldador de soldadura, soldadura por ola. Altamente resistente a golpes mecánicos y presión. Altamente confiable en entornos de cambios repentinos de temperatura y humedad. Características de super Q.
Características
- Muy buena soldabilidad mediante soldadura por ola, soldador o soldadura por flujo.
- Dimensiones altamente precisas, se pueden montar automáticamente.
- Los terminales son altamente resistentes a las fuerzas de tracción.
- Altamente resistente a golpes mecánicos y presión.
- Altamente fiable en entornos de cambios bruscos de temperatura y humedad. Características superiores de Q.
- Nivel de sensibilidad a la humedad 1 (solo NL10(C) / NL12(C))
Aplicaciones
- Televisores micro, televisores de cristal líquido, cámaras de video, videograbadoras portátiles, radios para automóviles, estéreos para automóviles, radios de cinta delgada, sintonizadores de televisión, teléfonos móviles, radio y otros dispositivos electrónicos.
Construcción
Codificación de Color
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Numeración de Piezas
Especificaciones eléctricas estándar
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Descarga de Archivos
-
- Informe RoHS
-
-
- ALCANCE
| Image | Tamaño | Tolerancia | Inductancia | Condición de prueba | DCR (Ω) máx. | IDC (A) | Q | SRF | Descarga de Archivos | Acción |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10MTR47) 
|
1210 |
±20% |
0.47 |
25.2MHz |
0.5 |
450 |
30 |
220 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10MTR56)
|
1210 |
±20% |
0.56 |
25.2MHz |
0.55 |
450 |
30 |
180 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10MTR68)
|
1210 |
±20% |
0.68 |
25.2MHz |
0.6 |
450 |
30 |
160 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10MTR82)
|
1210 |
±20% |
0.82 |
25.2MHz |
0.65 |
450 |
30 |
140 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT1R0)
|
1210 |
±10% |
1 |
7.96MHz |
0.7 |
400 |
30 |
120 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT1R2)
|
1210 |
±10% |
1.2 |
7.96MHz |
0.75 |
390 |
30 |
100 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT1R5)
|
1210 |
±10% |
1.5 |
7.96MHz |
0.85 |
370 |
30 |
85 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT1R8)
|
1210 |
±10% |
1.8 |
7.96MHz |
0.9 |
350 |
30 |
80 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT2R2)
|
1210 |
±10% |
2.2 |
7.96MHz |
1 |
320 |
30 |
75 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT2R7)
|
1210 |
±10% |
2.7 |
7.96MHz |
1.1 |
290 |
30 |
70 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT3R3)
|
1210 |
±10% |
3.3 |
7.96MHz |
1.2 |
260 |
30 |
60 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT3R9)
|
1210 |
±10% |
3.9 |
7.96MHz |
1.3 |
250 |
30 |
55 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT4R7)
|
1210 |
±10% |
4.7 |
7.96MHz |
1.5 |
220 |
30 |
50 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT5R6)
|
1210 |
±10% |
5.6 |
7.96MHz |
1.6 |
200 |
30 |
45 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT6R8)
|
1210 |
±10% |
6.8 |
7.96MHz |
1.8 |
180 |
30 |
40 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT8R2)
|
1210 |
±10% |
8.2 |
7.96MHz |
2 |
170 |
30 |
35 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT100)
|
1210 |
±10% |
10 |
2.52MHz |
2.1 |
150 |
30 |
30 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT120)
|
1210 |
±10% |
12 |
2.52MHz |
2.5 |
140 |
30 |
20 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT150)
|
1210 |
±10% |
15 |
2.52MHz |
2.8 |
130 |
30 |
20 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT180)
|
1210 |
±10% |
18 |
2.52MHz |
3.3 |
120 |
30 |
20 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT220)
|
1210 |
±10% |
22 |
2.52MHz |
3.7 |
110 |
30 |
20 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT270)
|
1210 |
±10% |
27 |
2.52MHz |
5 |
80 |
30 |
20 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT330)
|
1210 |
±10% |
33 |
2.52MHz |
5.6 |
70 |
30 |
17 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT390)
|
1210 |
±10% |
39 |
2.52MHz |
6.4 |
65 |
30 |
16 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT470)
|
1210 |
±10% |
47 |
2.52MHz |
7 |
60 |
30 |
15 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT560)
|
1210 |
±10% |
56 |
2.52MHz |
8 |
55 |
30 |
13 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT680)
|
1210 |
±10% |
68 |
2.52MHz |
9 |
50 |
30 |
12 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT820)
|
1210 |
±10% |
82 |
2.52MHz |
10 |
45 |
30 |
11 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT101)
|
1210 |
±10% |
100 |
0.796MHz |
10 |
40 |
20 |
10 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT121)
|
1210 |
±10% |
120 |
0.796MHz |
11 |
70 |
20 |
10 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KT151)
|
1210 |
±10% |
150 |
0.796MHz |
15 |
65 |
20 |
8 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12MTR18)
|
1812 |
±20% |
0.18 |
25.2MHz |
0.24 |
700 |
30 |
220 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12MTR22)
|
1812 |
±20% |
0.22 |
25.2MHz |
0.25 |
665 |
30 |
200 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12MTR27)
|
1812 |
±20% |
0.27 |
25.2MHz |
0.26 |
635 |
30 |
180 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12MTR33)
|
1812 |
±20% |
0.33 |
25.2MHz |
0.28 |
605 |
30 |
165 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12MTR39)
|
1812 |
±20% |
0.39 |
25.2MHz |
0.3 |
575 |
30 |
150 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12MTR47)
|
1812 |
±20% |
0.47 |
25.2MHz |
0.32 |
545 |
30 |
145 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12MTR56)
|
1812 |
±20% |
0.56 |
25.2MHz |
0.36 |
520 |
30 |
140 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12MTR68)
|
1812 |
±20% |
0.68 |
25.2MHz |
0.4 |
500 |
30 |
135 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12MTR82)
|
1812 |
±20% |
0.82 |
25.2MHz |
0.45 |
475 |
30 |
130 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KT1R0)
|
1812 |
±10% |
1 |
7.96MHz |
0.5 |
450 |
50 |
100 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KT1R2)
|
1812 |
±10% |
1.2 |
7.96MHz |
0.55 |
430 |
50 |
80 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KT1R5)
|
1812 |
±10% |
1.5 |
7.96MHz |
0.6 |
410 |
50 |
70 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KT1R8)
|
1812 |
±10% |
1.8 |
7.96MHz |
0.65 |
390 |
50 |
60 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KT2R2)
|
1812 |
±10% |
2.2 |
7.96MHz |
0.7 |
380 |
50 |
55 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KT2R7)
|
1812 |
±10% |
2.7 |
7.96MHz |
0.75 |
370 |
50 |
50 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KT3R3)
|
1812 |
±10% |
3.3 |
7.96MHz |
0.8 |
355 |
50 |
45 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KT3R9)
|
1812 |
±10% |
3.9 |
7.96MHz |
0.9 |
330 |
50 |
40 |
|
Agregar a la lista |
|---|
Aplicación
APLICACIONES MÉDICAS
Inductores de chip de alta frecuencia cerámicos, tamaño pequeño hasta 01005. Película delgada, multicapa,...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alto Q, baja TCR....
Lee mas