Declaración REACH - SVHC(Hsin Chu).pdf
APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, con cable de unión, anticorrosivo, MELF. Detección...
Lee masInductores de ferrita enrollados en alambre (Serie NL)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Inductor de ferrita de chip enrollado, alta corriente, disponible en tipo moldeado y tipo abierto. Tamaño pequeño hasta 0603, soldabilidad muy fuerte mediante soldadura por flujo o soldador de soldadura, soldadura por ola. Altamente resistente a golpes mecánicos y presión. Altamente confiable en entornos de cambios repentinos de temperatura y humedad. Características de super Q.
Características
- Muy buena soldabilidad mediante soldadura por ola, soldador o soldadura por flujo.
- Dimensiones altamente precisas, se pueden montar automáticamente.
- Los terminales son altamente resistentes a las fuerzas de tracción.
- Altamente resistente a golpes mecánicos y presión.
- Altamente fiable en entornos de cambios bruscos de temperatura y humedad. Características superiores de Q.
- Nivel de sensibilidad a la humedad 1 (solo NL10(C) / NL12(C))
Aplicaciones
- Televisores micro, televisores de cristal líquido, cámaras de video, videograbadoras portátiles, radios para automóviles, estéreos para automóviles, radios de cinta delgada, sintonizadores de televisión, teléfonos móviles, radio y otros dispositivos electrónicos.
Construcción
Codificación de Color
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Numeración de Piezas
Especificaciones eléctricas estándar
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Descarga de Archivos
-
- Informe RoHS
-
-
- ALCANCE
| Image | Tamaño | Tolerancia | Inductancia | Condición de prueba | DCR (Ω) máx. | IDC (A) | Q | SRF | Descarga de Archivos | Acción |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT220) 
|
0805 |
±5% |
22 |
2.52MHz |
6.3 |
160 |
16 |
20 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT270)
|
0805 |
±5% |
27 |
2.52MHz |
6.85 |
140 |
16 |
19 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT330)
|
0805 |
±5% |
33 |
2.52MHz |
7.6 |
120 |
16 |
18 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL05JT390)
|
0805 |
±5% |
39 |
2.52MHz |
8.2 |
100 |
15 |
16 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR12)
|
1008 |
±5% |
0.12 |
25.2MHz |
0.3 |
1000 |
26 |
800 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR18)
|
1008 |
±5% |
0.18 |
25.2MHz |
0.3 |
960 |
30 |
600 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR20)
|
1008 |
±5% |
0.2 |
25.2MHz |
0.3 |
960 |
30 |
735 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR22)
|
1008 |
±5% |
0.22 |
25.2MHz |
0.4 |
880 |
27 |
600 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR27)
|
1008 |
±5% |
0.27 |
25.2MHz |
0.42 |
900 |
29 |
425 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR33)
|
1008 |
±5% |
0.33 |
25.2MHz |
0.42 |
900 |
30 |
400 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR39)
|
1008 |
±5% |
0.39 |
25.2MHz |
0.45 |
700 |
30 |
375 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR47)
|
1008 |
±5% |
0.47 |
25.2MHz |
0.5 |
900 |
30 |
350 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR56)
|
1008 |
±5% |
0.56 |
25.2MHz |
0.55 |
850 |
30 |
325 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR62)
|
1008 |
±5% |
0.62 |
25.2MHz |
0.55 |
900 |
30 |
460 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR68)
|
1008 |
±5% |
0.68 |
25.2MHz |
0.55 |
800 |
30 |
300 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR75)
|
1008 |
±5% |
0.75 |
25.2MHz |
0.65 |
880 |
30 |
420 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR82)
|
1008 |
±5% |
0.82 |
25.2MHz |
0.65 |
700 |
30 |
260 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JTR91)
|
1008 |
±5% |
0.91 |
25.2MHz |
0.65 |
840 |
30 |
400 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT1R0)
|
1008 |
±5% |
1 |
7.96MHz |
0.6 |
600 |
25 |
245 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT1R2)
|
1008 |
±5% |
1.2 |
7.96MHz |
0.74 |
600 |
25 |
230 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT1R5)
|
1008 |
±5% |
1.5 |
7.96MHz |
0.85 |
550 |
25 |
182 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT1R8)
|
1008 |
±5% |
1.8 |
7.96MHz |
0.92 |
500 |
25 |
135 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT2R2)
|
1008 |
±5% |
2.2 |
7.96MHz |
1.1 |
500 |
25 |
105 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT2R7)
|
1008 |
±5% |
2.7 |
7.96MHz |
1.22 |
350 |
25 |
70 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT3R3)
|
1008 |
±5% |
3.3 |
7.96MHz |
1.37 |
350 |
25 |
55 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT3R9)
|
1008 |
±5% |
3.9 |
7.96MHz |
1.66 |
310 |
25 |
48 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT4R7)
|
1008 |
±5% |
4.7 |
7.96MHz |
1.68 |
300 |
25 |
43 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT5R6)
|
1008 |
±5% |
5.6 |
7.96MHz |
1.75 |
300 |
25 |
42 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT6R8)
|
1008 |
±5% |
6.8 |
7.96MHz |
1.85 |
300 |
25 |
39 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT8R2)
|
1008 |
±5% |
8.2 |
7.96MHz |
2 |
250 |
25 |
36 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT100)
|
1008 |
±5% |
10 |
2.52MHz |
2.32 |
250 |
20 |
33 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT120)
|
1008 |
±5% |
12 |
2.52MHz |
2.99 |
200 |
15 |
28 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT150)
|
1008 |
±5% |
15 |
2.52MHz |
3.42 |
200 |
15 |
24 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT180)
|
1008 |
±5% |
18 |
2.52MHz |
4.65 |
180 |
15 |
20 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT220)
|
1008 |
±5% |
22 |
2.52MHz |
5.12 |
180 |
15 |
18 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT270)
|
1008 |
±5% |
27 |
2.52MHz |
5.76 |
160 |
15 |
17 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT330)
|
1008 |
±5% |
33 |
2.52MHz |
6.44 |
120 |
15 |
16 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT390)
|
1008 |
±5% |
39 |
2.52MHz |
6.85 |
120 |
15 |
15 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT470)
|
1008 |
±5% |
47 |
2.52MHz |
9.94 |
110 |
14 |
13 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT560)
|
1008 |
±5% |
56 |
2.52MHz |
10.7 |
90 |
14 |
10 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT680)
|
1008 |
±5% |
68 |
2.52MHz |
12.8 |
90 |
14 |
8 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT820)
|
1008 |
±5% |
82 |
2.52MHz |
18.3 |
80 |
14 |
8 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL08JT101)
|
1008 |
±5% |
100 |
1MHz |
19.6 |
120 |
8 |
7 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10MTR18)
|
1210 |
±20% |
0.18 |
25.2MHz |
0.28 |
450 |
30 |
400 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10MTR22)
|
1210 |
±20% |
0.22 |
25.2MHz |
0.32 |
450 |
30 |
350 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10MTR27)
|
1210 |
±20% |
0.27 |
25.2MHz |
0.36 |
450 |
30 |
320 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10MTR33)
|
1210 |
±20% |
0.33 |
25.2MHz |
0.4 |
450 |
30 |
300 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10MTR39)
|
1210 |
±20% |
0.39 |
25.2MHz |
0.45 |
450 |
30 |
250 |
|
Agregar a la lista |
|---|
Aplicación
APLICACIONES MÉDICAS
Inductores de chip de alta frecuencia cerámicos, tamaño pequeño hasta 01005. Película delgada, multicapa,...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alto Q, baja TCR....
Lee mas