Declaración REACH - SVHC(Hsin Chu).pdf
APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, con cable de unión, anticorrosivo, MELF. Detección...
Lee masInductores de ferrita enrollados en alambre (Serie NL)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Inductor de ferrita de chip enrollado, alta corriente, disponible en tipo moldeado y tipo abierto. Tamaño pequeño hasta 0603, soldabilidad muy fuerte mediante soldadura por flujo o soldador de soldadura, soldadura por ola. Altamente resistente a golpes mecánicos y presión. Altamente confiable en entornos de cambios repentinos de temperatura y humedad. Características de super Q.
Características
- Muy buena soldabilidad mediante soldadura por ola, soldador o soldadura por flujo.
- Dimensiones altamente precisas, se pueden montar automáticamente.
- Los terminales son altamente resistentes a las fuerzas de tracción.
- Altamente resistente a golpes mecánicos y presión.
- Altamente fiable en entornos de cambios bruscos de temperatura y humedad. Características superiores de Q.
- Nivel de sensibilidad a la humedad 1 (solo NL10(C) / NL12(C))
Aplicaciones
- Televisores micro, televisores de cristal líquido, cámaras de video, videograbadoras portátiles, radios para automóviles, estéreos para automóviles, radios de cinta delgada, sintonizadores de televisión, teléfonos móviles, radio y otros dispositivos electrónicos.
Construcción
Codificación de Color
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Numeración de Piezas
Especificaciones eléctricas estándar
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Descarga de Archivos
-
- Informe RoHS
-
-
- ALCANCE
| Image | Tamaño | Tolerancia | Inductancia | Condición de prueba | DCR (Ω) máx. | IDC (A) | Q | SRF | Descarga de Archivos | Acción |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KTC820) 
|
1210 |
±10% |
82 |
2.52MHz |
8.71 |
80 |
20 |
9 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL10KTC101)
|
1210 |
±10% |
100 |
0.796MHz |
10.14 |
75 |
20 |
8 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC1R0)
|
1812 |
±10% |
1 |
7.96MHz |
0.11 |
1050 |
10 |
200 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC1R2)
|
1812 |
±10% |
1.2 |
7.96MHz |
0.12 |
1000 |
10 |
160 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC1R5)
|
1812 |
±10% |
1.5 |
7.96MHz |
0.15 |
950 |
10 |
130 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC1R8)
|
1812 |
±10% |
1.8 |
7.96MHz |
0.16 |
900 |
10 |
100 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC2R2)
|
1812 |
±10% |
2.2 |
7.96MHz |
0.18 |
850 |
10 |
80 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC2R7)
|
1812 |
±10% |
2.7 |
7.96MHz |
0.2 |
800 |
10 |
60 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC3R3)
|
1812 |
±10% |
3.3 |
7.96MHz |
0.22 |
750 |
10 |
45 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC3R9)
|
1812 |
±10% |
3.9 |
7.96MHz |
0.24 |
700 |
10 |
40 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC4R7)
|
1812 |
±10% |
4.7 |
7.96MHz |
0.27 |
650 |
10 |
35 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC5R6)
|
1812 |
±10% |
5.6 |
7.96MHz |
0.3 |
650 |
10 |
30 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC6R8)
|
1812 |
±10% |
6.8 |
7.96MHz |
0.35 |
600 |
10 |
28 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC8R2)
|
1812 |
±10% |
8.2 |
7.96MHz |
0.4 |
600 |
10 |
25 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC100)
|
1812 |
±10% |
10 |
2.52MHz |
0.5 |
550 |
10 |
22 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC120)
|
1812 |
±10% |
12 |
2.52MHz |
0.6 |
500 |
10 |
21 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC150)
|
1812 |
±10% |
15 |
2.52MHz |
0.7 |
450 |
10 |
20 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC180)
|
1812 |
±10% |
18 |
2.52MHz |
0.8 |
400 |
10 |
19 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC220)
|
1812 |
±10% |
22 |
2.52MHz |
0.9 |
370 |
10 |
18 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC270)
|
1812 |
±10% |
27 |
2.52MHz |
1.2 |
330 |
10 |
16 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC330)
|
1812 |
±10% |
33 |
2.52MHz |
1.4 |
300 |
10 |
14 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC390)
|
1812 |
±10% |
39 |
2.52MHz |
1.6 |
280 |
10 |
12 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC470)
|
1812 |
±10% |
47 |
2.52MHz |
1.9 |
260 |
10 |
11.5 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC560)
|
1812 |
±10% |
56 |
2.52MHz |
2.2 |
240 |
10 |
11 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC680)
|
1812 |
±10% |
68 |
2.52MHz |
2.6 |
220 |
10 |
10 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC820)
|
1812 |
±10% |
82 |
2.52MHz |
3.5 |
200 |
10 |
9 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC101)
|
1812 |
±10% |
100 |
0.796MHz |
4 |
180 |
20 |
8 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC121)
|
1812 |
±10% |
120 |
0.796MHz |
4.5 |
160 |
20 |
7.5 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC151)
|
1812 |
±10% |
150 |
0.796MHz |
6.5 |
140 |
20 |
7 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC181)
|
1812 |
±10% |
180 |
0.796MHz |
7.5 |
120 |
20 |
6.5 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC221)
|
1812 |
±10% |
220 |
0.796MHz |
9 |
120 |
20 |
5.5 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC271)
|
1812 |
±10% |
270 |
0.796MHz |
11 |
100 |
20 |
5 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC331)
|
1812 |
±10% |
330 |
0.796MHz |
13 |
90 |
20 |
4 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC391)
|
1812 |
±10% |
390 |
0.796MHz |
23 |
80 |
20 |
3.8 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC471)
|
1812 |
±10% |
470 |
0.796MHz |
26 |
75 |
20 |
3.5 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC561)
|
1812 |
±10% |
560 |
0.796MHz |
30 |
70 |
20 |
2.8 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC681)
|
1812 |
±10% |
680 |
0.796MHz |
40 |
65 |
20 |
2.6 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL12KTC821)
|
1812 |
±10% |
820 |
0.796MHz |
45 |
60 |
20 |
2.5 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC1R0)
|
2220 |
±10% |
1 |
7.96MHz |
0.03 |
1800 |
10 |
95 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC1R2)
|
2220 |
±10% |
1.2 |
7.96MHz |
0.035 |
1700 |
10 |
70 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC1R5)
|
2220 |
±10% |
1.5 |
7.96MHz |
0.04 |
1600 |
10 |
55 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC1R8)
|
2220 |
±10% |
1.8 |
7.96MHz |
0.05 |
1400 |
10 |
47 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC2R2)
|
2220 |
±10% |
2.2 |
7.96MHz |
0.06 |
1300 |
10 |
42 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC2R7)
|
2220 |
±10% |
2.7 |
7.96MHz |
0.07 |
1200 |
10 |
37 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC3R3)
|
2220 |
±10% |
3.3 |
7.96MHz |
0.08 |
1120 |
10 |
34 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC3R9)
|
2220 |
±10% |
3.9 |
7.96MHz |
0.09 |
1050 |
10 |
32 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC4R7)
|
2220 |
±10% |
4.7 |
7.96MHz |
0.11 |
950 |
10 |
29 |
|
Agregar a la lista |
Inductor de Chip Bobinado (Ferrita) (Serie NL NL20KTC5R6)
|
2220 |
±10% |
5.6 |
7.96MHz |
0.13 |
880 |
10 |
26 |
|
Agregar a la lista |
|---|
Aplicación
APLICACIONES MÉDICAS
Inductores de chip de alta frecuencia cerámicos, tamaño pequeño hasta 01005. Película delgada, multicapa,...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alto Q, baja TCR....
Lee mas