Dickschicht-Array-Chip-Widerstand (CN-Serie CN-21FL6--825R)

Viking Tech hat Erfahrung in der Gestaltung innovativer Komponenten und bietet Unterstützung und Service für globale Kunden, die einen echten Fertigungspartner benötigen. Unser Ziel ist es, führend in Design, Fertigung und Vermarktung von Miniatur-, Präzisionspassivkomponenten zu sein, die in Automobil-, Industrie- und 3C-Elektronikanwendungen verwendet werden.

Dickschicht-Array-Chip-Widerstand (CN-Serie CN-21FL6--825R)

Anfrage absenden Zur Liste hinzufügen

CN-21FL6--825R

Dickschicht-Array-Chip-Widerstand (CN-Serie CN-21FL6--825R)
Dickschicht-Array-Chip-Widerstand (CN-Serie CN-21FL6--825R) Files Download

Dickschicht-Array-Chip-Widerstand - CN-Serie
CN,CAN Series0201 ±1% 200 1/32W Series825Ω 10k/Reel

GrößeToleranzTCR (ppm /℃)LeistungWiderstand (Ohm)Gehäuse
0201±1%2001/32W82510k/Reel

Äquivalenter Schaltungsplan

Thick Film Array Chip Resistor - CN Series Equivalent Circuit Diagram

Umwelteigenschaften

Item Requirement Test Method
±1% ±5% Jumper
Temperature Coefficient of
Resistance (T.C.R.)		 As Spec. JIS-C-5201-1 4.8
IEC-60115-1 4.8
-55°C~+125°C, 25°C is the reference temperature
Short Time Overload ±(1.0%+0.05Ω)
CNA42/43:
±(2.0%+0.05Ω)		 ±(2.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.13
IEC-60115-1 4.13
RCWV*2.5 or Max. Overload Voltage whichever is lower for 5 seconds
Insulation Resistance ³10G JIS-C-5201-1 4.6
IEC-60115-1 4.6
Max. Overload Voltage for 1 minute
Endurance ±(2.0%+0.10Ω) ±(3.0%+0.10Ω) <50mΩ
CN-21/41&
CNA42/43:
<100mΩ 		JIS-C-5201-1 4.25
IEC-60115-1 4.25.1
70±2°C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF”
Damp Heat with Load ±(2.0%+0.10Ω) ±(3.0%+0.10Ω) <50mΩ
CNA42/43:
<100mΩ 		JIS-C-5201-1 4.24
IEC-60115-1 4.24
40±2°C, 90~95% R.H., RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF”
Dry Heat ±(1.0%+0.05Ω) ±(1.5%+0.10Ω)
CN-21/41:
±(3.0%+0.10Ω)		 <50mΩ
CN-21/41:
<100mΩ 		JIS-C-5201-1 4.23
IEC-60115-1 4.23.2
at +125/+155°C for 1000 hrs
Bending Strength ±(1.0%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.33
IEC-60115-1 4.33
Bending once for 5 seconds with 3mm
Solderability 95% min. coverage JIS-C-5201-1 4.17
IEC-60115-1 4.17
245±5°C for 3 seconds
Resistance to Soldering Heat ±(0.5%+0.05Ω)
CNA42/43:
±(1%+0.05Ω)		 ±(1.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.18
IEC-60115-1 4.18
260±5°C for 10 seconds
Voltage Proof No breakdown or flashover JIS-C-5201-1 4.7
IEC-60115-1 4.7
1.42 times Max. Operating Voltage for 1 minute
Leaching Individual leaching area ≦5%
Total leaching area ≦ 10%		 JIS-C-5201-1 4.18
IEC-60068-2-58 8.2.1
260±5°C for 30 seconds
Rapid Change of Temperature ±(0.5%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.19
IEC-60115-1 4.19
-55°C to +125/+155°C, 5 cycles

RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15~28°C; Humidity < 80%RH

Lötbedingungen

Soldering Condition (IPC/JEDEC J-STD-020)

Kennzeichnung

No Marking for CN-21/CN-41/CNA42
Jumper for all: Letter “0”
1% for CN-42/CN-43/CNA43: 4 digits marking (non-including E24 series)
Example:
Resistance 102Ω 2.49KΩ 30K1Ω 49.9MΩ 121KΩ
Marking 1020 2491 3012 4992 1213
5% for CN-42/CN-43/CNA43: 3 digits marking in E24
Example: 101=100Ω 102=1KΩ (1st and 2nd are E24 code and 3rd code is multiplier)

E24 code 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91

Verpackung

Reel Specifications & Packaging Quantity

Packing Quantity & Reel Specifications
Type Packaging Quantity Tape Width Reel Diameter ΦA (mm) ΦB (mm) ΦC (mm) W (mm) T (mm)
CN-21
CN-41		 Paper 10K 8mm 7 inch 178.5±1.5 60+1/-0 13.0±0.2 9.0±0.5 12.5±0.5
CN-42
CNA42		 Paper 10K 8mm 7 inch 178.5±1.5 60+1/-0 13.0±0.2 9.0±0.5 12.5±0.5
20K 8mm 10 inch 254±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
40K 8mm 13 inch 330±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
CN-43
CNA43		 Paper 5K 8mm 7 inch 178.5±1.5 60+1/-0 13.0±0.2 9.0±0.5 12.5±0.5
10K 8mm 10 inch 254±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
20K 8mm 13 inch 330±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5

Paper Tape Specifications

Paper Tape Specifications
Type A (mm) B (mm) W (mm) E (mm) F (mm) P0 (mm) P1 (mm) P2 (mm) ΦD0 (mm) T (mm)
CN-21 0.77±0.05 0.97±0.05 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 2.0±0.05 2.0±0.05 1.50+0.1,-0 0.50±0.1
CN-41 0.77±0.05 1.57±0.05 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 2.0±0.05 2.0±0.05 1.50+0.1,-0 0.50±0.1
CN-42 1.20±0.1 2.20±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 2.0±0.05 2.0±0.05 1.50+0.1,-0 0.70±0.1
CN-43 1.95±0.1 3.50±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.05 2.0±0.05 1.50+0.1,-0 0.85±0.1
CNA42 1.20±0.1 2.20±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 2.0±0.05 2.0±0.05 1.50+0.1,-0 0.70±0.1
CNA43 1.95±0.1 3.50±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.05 2.0±0.05 1.50+0.1,-0 0.85±0.1

Code

  • 825R
Dateien herunterladen

SUCHE

Bedingungssuche:      Kreuzsuche

Menü

Bester Verkauf

Viking Introduction

Viking Tech Corporation is Taiwan supplier and manufacturer in Zertifizierter HF-Induktor-Lieferant Viking has been offering our customers high quality Dünnschicht-Präzisionswiderstand, Stromsensorenwiderstand, RF-Keramikchip-Induktor, Leistungsinduktor, MELF-Dünnschichtwiderstand, Dickfilmwiderstand, MLCC, Mehrschicht-Chipkondensator, Chip-Perle, Leistungswiderstand, Antisulfur-Widerstand, Hochspannungswiderstand, Überspannungsschutz-Widerstand, Impuls-Widerstand. Widerstandsarray, bedrahteter Widerstand, Aluminium-Festelektrolytkondensator since 1997. With both advanced technology and 25 years experience, Viking always make sure to meet each customer's demand.

Hauptprodukt

AUTOMOBILANWENDUNGEN

AUTOMOBILANWENDUNGEN

Präzisions-Dünnschichtwiderstände 0,01%, TC2ppm, Drahtbondage, Antikorrosiv, MELF. Stromerfassung,...

Weiterlesen
MEDIZINISCHE ANWENDUNGEN

MEDIZINISCHE ANWENDUNGEN

Keramische Hochfrequenz-Chip-Induktoren, kleine Größe bis 01005. Dünnschicht-, Mehrschicht-, Wickel-,...

Weiterlesen
KOMMUNIKATIONSANWENDUNGEN

KOMMUNIKATIONSANWENDUNGEN

Mehrschichtige Keramikkondensatoren bieten hohe Spannung, hohe Frequenz, geringes Rauschen, hohe Güte,...

Weiterlesen