AUTOMOBILANWENDUNGEN
Dünnschicht-Präzisionswiderstand 0,01%, TC2ppm, Drahtbondable, Antikorrosiv, MELF. Stromsensoren, Metall,...
WeiterlesenSulfatresistenter Dickschicht-Array-Chip-Widerstand (AS-Serie (Array) AS21FTE17R4)
AS21FTE17R4
Anti-Sulfurierter Dickschicht-Array-Chip-Widerstand - AS-Serie (Array)
AS Series0201 ±1% 10K/ReelnH 200 1/32W Series17.4Ω
| Größe | Toleranz | Toleranz | TCR (ppm /℃) | Leistung | Widerstand (Ohm) |
|---|---|---|---|---|---|
| 0201 | ±1% | 10K/Reel | 200 | 1/32W | 17.4 |
Äquivalentschaltbild
Umwelteigenschaften
| Item | Requirement | Test Method | ||
|---|---|---|---|---|
| 1% and Below | 5% | Jumper | ||
| Temperature Coefficient of Resistance (T.C.R.) | As Spec. | JIS C 5201-1 4.8 IEC 60115-1 4.8 At 25°C/-55°C and 25°C/ + 125°C, 25°C is the reference temperature | ||
| Short Time Overload | ± (1.0% + 0.05Ω) | ± (2.0% + 0.05Ω) | <50mΩ | JIS C 5201-1 4.13 IEC 60115-1 4.13 2.5 times RCWV or Max. Overload Voltage whichever is lower for 5 seconds |
| Insulation Resistance | ≧10G | JIS C 5201-1 4.6 IEC 60115-1 4.6 Max. Overload Voltage for 1 minute | ||
| Operational Life | ± (2.0% + 0.10Ω) | ± (3.0% + 0.10Ω) | <100mΩ | MIL-STD-202 Method 108 Condition D Steady State TA=125°C at derated power. Measurement at 24±4 hours after test conclusion. |
| Biased Humidity | ± (2.0% + 0.10Ω) | ± (3.0% + 0.10Ω) | <100mΩ | MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power. |
| High Temperature Exposure | ± (1.0% + 0.05Ω) | ± (1.5% + 0.10Ω) | <50mΩ | MIL-STD-202 Method 108 at + 155°C for 1000 hrs |
| Board Flex | ± (1.0% + 0.05Ω) | ± (1.0% + 0.05Ω) | <50mΩ | AEC-Q200-005 Bending once for 60 seconds 2010, 2512 sizes: 2mm Other sizes: 3mm |
| Solderability | >95% coverage | JIS C 5201-1 4.17 IEC 60115-1 4.17 J-STD-002 245± 5°C for 3 seconds | ||
| Resistance to Soldering Heat | ± (0.5% + 0.05Ω) | ± (1.0% + 0.05Ω) | <50mΩ | MIL-STD-202 Method 210 260± 5°C for 10 seconds |
| Voltage Proof | No breakdown or flashover | JIS C 5201-1 4.7 IEC 60115-1 4.7 1.42 times Max. Operating Voltage for 1 minute | ||
| Leaching | Individual leaching area ≦5% Total leaching area ≦10% | JIS C 5201-1 4.18 IEC 60068-2-58 8.2.1 260± 5°C for 30 seconds | ||
| Temperature Cycling | ± (0.5% + 0.05Ω) | ± (1.5% + 0.05Ω) | <50mΩ | JESD22 Method JA-104 -55°C to + 125°C, 1000 cycles |
| Mechanical Shock | ± (0.25% + 0.05Ω) | ± (1.0% + 0.05Ω) | <50mΩ | MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. |
| Vibration | ± (0.5% + 0.05Ω) | ± (1.0% + 0.05Ω) | <50mΩ | MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz |
| ESD | ± (3% + 0.05Ω) | AEC-Q200-002 Human body model 0201: 0.5KV 0402/0603: 1KV 0805 and above: 2KV | ||
| Resistance to Solvents | No visible damage on appearance and marking. | MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. | ||
| Terminal Strength | No broken | AEC-Q200-006 Force of 1.8kg for 60 seconds. | ||
| Flammability | No ignition of the tissue paper or scorching or the pinewood board | UL-94 V-0 or V-1 are acceptable. Electrical test not required. | ||
| Sulfur Test | △R± 0.5% | <50mΩ | EIA-977 105± 2°C, no power rating for 750 hrs. | |
RCWV (Rated Continuous Working Voltage) = √(P x R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH
Lötbedingungen
Kennzeichnung
No Marking for AS21 / AS41
Jumper for all: Letter "0"
1% for AS42 / AS43: 4 digits marking (non-including E24 series)
Example:
| Resistance | 102Ω | 2.49KΩ | 30K1Ω | 49.9KΩ | 121KΩ |
|---|---|---|---|---|---|
| marking | 1020 | 2491 | 3012 | 4992 | 1213 |
5% for AS42 / AS43: 3 digits marking in E24
Example: 101=100Ω 102=1KΩ (1st and 2nd are E24 code and 3rd code is multiplier)
| E24 code | 10 | 11 | 12 | 13 | 15 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 43 | 47 | 51 | 56 | 62 | 68 | 75 | 82 | 91 |
Verpackung
Reel Specifications & Packaging Quantity
| Type | Packaging Quantity | Tape Width | Reel Diameter | ΦA (mm) | ΦB (mm) | ΦC (mm) | W (mm) | T (mm) | |
|---|---|---|---|---|---|---|---|---|---|
| CN-21 CN-41 | Paper | 10K | 8mm | 7 inch | 178.5 ± 1.5 | 60 + 1/-0 | 13.0 ± 0.2 | 9.0 ± 0.5 | 12.5 ± 0.5 |
| CN-42 | Paper | 10K | 8mm | 7 inch | 178.5 ± 1.5 | 60 + 1/-0 | 13.0 ± 0.2 | 9.0 ± 0.5 | 12.5 ± 0.5 |
| 20K | 8mm | 10 inch | 254 ± 1.0 | 100 ± 0.5 | 13.0 ± 0.2 | 9.5 ± 0.5 | 13.5 ± 0.5 | ||
| 40K | 8mm | 13 inch | 330 ± 1.0 | 100 ± 0.5 | 13.0 ± 0.2 | 9.5 ± 0.5 | 13.5 ± 0.5 | ||
| CN-43 | Paper | 5K | 8mm | 7 inch | 178.5 ± 1.5 | 60 + 1/-0 | 13.0 ± 0.2 | 9.0 ± 0.5 | 12.5 ± 0.5 |
| 10K | 8mm | 10 inch | 254 ± 1.0 | 100 ± 0.5 | 13.0 ± 0.2 | 9.5 ± 0.5 | 13.5 ± 0.5 | ||
| 20K | 8mm | 13 inch | 330 ± 1.0 | 100 ± 0.5 | 13.0 ± 0.2 | 9.5 ± 0.5 | 13.5 ± 0.5 | ||
Paper Tape Specifications
| Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ΦD0 (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| CN-21 | 0.77 ± 0.05 | 0.97 ± 0.05 | 8.0 ± 0.2 | 1.75 ± 0.1 | 3.5 ± 0.05 | 4.0 ± 0.1 | 2.0 ± 0.05 | 2.0 ± 0.05 | 1.50 + 0.1, -0 | 0.50 ± 0.1 |
| CN-41 | 0.77 ± 0.05 | 1.57 ± 0.05 | 8.0 ± 0.2 | 1.75 ± 0.1 | 3.5 ± 0.05 | 4.0 ± 0.1 | 2.0 ± 0.05 | 2.0 ± 0.05 | 1.50 + 0.1, -0 | 0.50 ± 0.1 |
| CN-42 | 1.20 ± 0.1 | 2.20 ± 0.1 | 8.0 ± 0.2 | 1.75 ± 0.1 | 3.5 ± 0.05 | 4.0 ± 0.1 | 2.0 ± 0.05 | 2.0 ± 0.05 | 1.50 + 0.1, -0 | 0.70 ± 0.1 |
| CN-43 | 1.95 ± 0.1 | 3.50 ± 0.1 | 8.0 ± 0.2 | 1.75 ± 0.1 | 3.5 ± 0.05 | 4.0 ± 0.1 | 4.0 ± 0.05 | 2.0 ± 0.05 | 1.50 + 0.1, -0 | 0.85 ± 0.1 |
Code
- 17R4
- Dateien herunterladen
Hauptprodukt
MEDIZINISCHE ANWENDUNGEN
Keramische Hochfrequenz-Chip-Induktoren, klein bis 01005. Dünnschicht-, Mehrschicht-, Drahtgewickelte-,...
Weiterlesen
KOMMUNIKATIONSANWENDUNGEN
Mehrschicht-Keramikkondensator bietet hohe Spannung, hohe Frequenz, geringes Rauschen, hohe Güte, niedrige...
Weiterlesen