AUTOMOTIVE APPLICATIONS
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreAutomotive Grade Metal Film Precision High Voltage MELF Resistor (CSRP Series)
0204 / 0207
Derating Curve
High voltage MELF metal film precision resistor, ready for the size of 0204/0207. Tight tolerance of 0.1%, 25/50ppm. 340K~3.4Mohm. Max Overload upto 2000V. The MELF is cylindrical in shape and with metal electrode Leadless face resistor. Land pattern sizes are the same as SMD chip resistors. High quality of MELF resistors offer excellent electrical and Environmental Stability, exceptional stability demonstrated over life, biased humidity, and short time overload testing.
Features
- AEC-Q200 Qualified
- Thin film technology
- High voltage application
- Sn termination on Ni barrier layer
- Tight tolerance down to ±0.1%
- High power rating up to 1 Watts
- SMD enabled structure
- Lead-free and RoHS compliant
Applications
- Industrial
- Telecommunication
- Medical Equipment
- Measurement/Testing Equipment
Construction
Part Numbering
Part Number：CSRP0204FTDG1004
Standard Electrical Specifications
| Item Type | Power Rating at 70°C | Operating Temp. Range | Max. Operating Voltage | Max. Overload Voltage | Resistance Range | TCR (PPM/°C) | |||
|---|---|---|---|---|---|---|---|---|---|
| ±0.1% (E24,E96) | ±0.25% (E24,E96) | ±0.5% (E24,E96) | ±1% (E24,E96) | ||||||
| 0204 | 2/5W | -55 ~ +155°C | 500V | 1000V | 340KΩ-1MΩ | 340KΩ-3.4MΩ | ±25 | ||
| 340KΩ-1MΩ | 340KΩ-3.4MΩ | 340KΩ-10MΩ | ±50 | ||||||
| 0207 | 1W | -55 ~ +155°C | 1000V | 2000V | 340KΩ-1MΩ | 340KΩ-3.4MΩ | ±25 | ||
| 340KΩ-1MΩ | 340KΩ-3.4MΩ | 340KΩ-10MΩ | ±50 | ||||||
Operating Voltage=√(P*R) or Max. operating voltage listed above, whichever is lower.
Overload Voltage=2.5*√(P*R) or Max. overload voltage listed above, whichever is lower.
RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.
☑ Viking is capable of manufacturing the optional spec based on customer's requirement.
Pulse Withstanding Capacity
The single impulse graph is the result of 50 impulses of rectangular shape applied at one-minute intervals. The limit of acceptance was a shift in resistance of less than 1% from the initial value. The power applied was subject to the restrictions of the maximum permissible impulse voltage graph shown.
Continuous Pulse
The continuous load graph was obtained by applying repetitive rectangular pulses where the pulse period was adjusted so that the average power dissipated in the resistor was equal to its rated power at 70°C. Again the limit of acceptance was a shift in resistance of less than 1% from the initial value.
Lightning Surge
Resistors are tested in accordance with IEC 60115-1 using both 1.2/50us and 10/700us pulse shapes. The limit of acceptance is a shift in resistance of less than 0.5% from the initial value.
- Files Download
- RoHS Report
- REACH
Application
MEDICAL APPLICATIONS
Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...
Read More
COMMUNICATION APPLICATIONS
Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...
Read More