Indutor de Chip de Ferrite Multicamada (Série ML ML05MT82N)Fabricantes

Indutor de Chip de Ferrite Multicamada (Série ML ML05MT82N)

Enviar consulta Adicionado a lista

ML05MT82N

Indutor de Chip de Ferrite Multicamada (Série ML ML05MT82N) Files Download

Indutor de chip de ferrite multicamada, tamanhos pequenos, circuito magnético fechado evita interferência cruzada, adequado para instalação de alta densidade e soldagem por refluxo. Usado em todos os tipos de dispositivos eletrônicos, computação, conversores.
ML Series0805 ±20%nH 82μH 0.2 Ω 300mA 20 255MHz 50MHz, 200mV MHz

Tamanho	Tolerância	Indutância	DCR (Ω) máx.	IDC (mA)	Q	SRF	Frequência L/Q (MHz)
0805	±20%	82	0.2	300	20	255MHz	50MHz, 200mV

Especificações Elétricas de Alta Corrente

MLH05 Multilayer Ferrite Chip Inductors Type(□:Tolerance):

Part No.	Inductance (uH)	Tolerance	Test Freq.	SRF (MHz) min.	DCR (Ω) max.	IDC (mA) max.
MLH05□TR47	0.47	± 20%	1MHz, 250mV	100	0.125	1100
MLH05□TR68	0.68	± 20%	1MHz, 250mV	100	0.150	1000
MLH05□TR82	0.82	± 20%	1MHz, 250mV	90	0.175	900
MLH05□T1R0	1.0	± 20%	1MHz, 250mV	90	0.200	800
MLH05□T1R2	1.2	± 20%	1MHz, 250mV	80	0.200	800
MLH05□T1R5	1.5	± 20%	1MHz, 250mV	70	0.275	700
MLH05□T1R8	1.8	± 20%	1MHz, 250mV	60	0.275	700
MLH05□T2R2	2.2	± 20%	1MHz, 250mV	50	0.313	600
MLH05□T3R3	3.3	± 20%	1MHz, 250mV	40	0.275	500
MLH05□T4R7	4.7	± 20%	1MHz, 250mV	30	0.375	500

☑ Operating temperature range: -40 ~ +125°C

MLH06 Multilayer Ferrite Chip Inductors Type(□:Tolerance):

Part No.	Inductance (uH)	Tolerance	Test Freq.	SRF (MHz) min.	DCR (Ω) max.	IDC (mA) max.
MLH06□TR47	0.47	± 20%	1MHz, 250mV	100	0.182	1500
MLH06□TR68	0.68	± 20%	1MHz, 250mV	90	0.195	1500
MLH06□TR82	0.82	± 20%	1MHz, 250mV	80	0.208	1500
MLH06□T1R0	1.0	± 20%	1MHz, 250mV	60	0.208	1400
MLH06□T1R2	1.2	± 20%	1MHz, 250mV	60	0.208	1400
MLH06□T1R5	1.5	± 20%	1MHz, 250mV	50	0.260	1200
MLH06□T1R8	1.8	± 20%	1MHz, 250mV	50	0.260%	1200
MLH06□T2R2	2.2	± 20%	1MHz, 250mV	40	0.286	1200
MLH06□T3R3	3.3	± 20%	1MHz, 250mV	30	0.312	1100
MLH06□T4R7	4.7	± 20%	1MHz, 250mV	20	0.390	1100

☑ Operating temperature range: -40 ~ +125°C

MLH08 Multilayer Ferrite Chip Inductors Type(□:Tolerance):

Part No.	Inductance (uH)	Tolerance	Test Freq.	SRF (MHz) min.	DCR (Ω) max.	IDC (mA) max.
MLH08□TR47	0.47	± 20%	1MHz, 250mV	100	0.088	1800
MLH08□TR68	0.68	± 20%	1MHz, 250mV	90	0.113	1700
MLH08□TR82	0.82	± 20%	1MHz, 250mV	80	0.125	1700
MLH08□T1R0	1.0	± 20%	1MHz, 250mV	60	0.138	1600
MLH08□T1R2	1.2	± 20%	1MHz, 250mV	60	0.138	1600
MLH08□T1R5	1.5	± 20%	1MHz, 250mV	50	0.163	1500
MLH08□T1R8	1.8	± 20%	1MHz, 250mV	50	0.163	1500
MLH08□T2R2	2.2	± 20%	1MHz, 250mV	40	0.213	1300
MLH08□T3R3	3.3	± 20%	1MHz, 250mV	30	0.200	1200
MLH08□T4R7	4.7	± 20%	1MHz, 250mV	25	0.250	1100

☑ Operating temperature range: -40 ~ +125°C

Características Ambientais

Electrical Performance Test

Item	Requirement	Test Method
Inductance	Refer to standard electrical characteristic spec.	HP4291B
Q		HP4291B
SRF		HP4291B
DC Resistance RDC		Agilent 34401A

Mechanical Performance Test

Item	Requirement	Test Method
Resistance to Soldering Heat	Appearance: No damage More than 75% of the terminal. Electrode should be covered with solder.	Pre-heating: 150°C, 1min. Solder Composition: Sn/Ag3.0/Cu0.5 (Pb-Free) Solder Temperature: 260± 5°C (Pb-Free) Immersion Time: 10± 1 sec.
Solderability	The electrodes shall be at least 90% covered with new solder coating	Pre-heating: 150°C, 1min. Solder Composition: Sn/Ag3.0/Cu0.5 (Pb-Free) Solder Temperature: 245± 5°C (Pb-Free) Immersion Time: 4± 1 sec.
Flexure Strength	The forces applied on the right conditions must not damage the terminal electrode and the ferrite.	Test device shall be soldered on the substrate Substrate Dimension: 100 x 40 x 1.6 mm Deflection: 2.0 mm Keeping Time: 30 sec. * For 0402, substrate dimension is 100 x 40 x 0.8 mm
Vibration		Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1 min. Amplitude: 1.5 mm Time: 2 hrs for each axis (X, Y & Z), total 6 hrs

Climatic Test

Item

Requirement

Test Method

Damp Heat with Load

Appearance: No damage
L change: within± 20% of initial value

Temperature: 40± 2°C
Relative Humidity: 90 ~ 95%
Time: 1000 hrs
Measured after exposure in the room condition for 24 hrs

Temperature Cycle

One cycle:

Step	Temperature (°C)	Time (min.)
1	-40± 3	30
2	25± 2	3
3	85± 3	30
4	25± 2	3

Total: 100 cycles
Measured after exposure in the room condition for 24 hrs

High Temperature Resistance

Temperature: 85± 3°C
Relative Humidity: 20%
Applied Current: Rated Current
Time: 1000 hrs
Measured after exposure in the room condition for 24 hrs

Low Temperature Resistance

Temperature: -40± 3°C
Relative Humidity: 0%
Time: 1000 hrs
Measured after exposure in the room condition for 24 hrs

☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH

Embalagem

Reel Specifications (Unit : mm)

Type	A	B	C	W	T	Quantity (EA)
Type	A	B	C	W	T	Paper Tape (Type B)	Polystyrene Tape (Type A)
ML03	178 ± 1	60.0 + 0.5	13.0 ± 0.2	9.00 ± 0.5	12.0 ± 0.15	4,000	-
ML05 (≤ 2.2uH)	178 ± 1	60.0 + 0.5	13.0 ± 0.2	9.00 ± 0.5	12.0 ± 0.15	4,000	-
ML05 (≥ 2.7uH)	178 ± 1	60.0 + 0.5	13.0 ± 0.2	9.00 ± 0.5	12.0 ± 0.15	-	3,000
ML06	178 ± 1	60.0 + 0.5	13.0 ± 0.2	9.00 ± 0.5	12.0 ± 0.15	-	3,000
MLH05	178 ± 1	60.0 + 0.5	13.0 ± 0.2	9.00 ± 0.5	12.0 ± 0.15	4.000	-
MLH06	178 ± 1	60.0 + 0.5	13.0 ± 0.2	9.00 ± 0.5	12.0 ± 0.15	-	3,000
MLH08	178 ± 1	60.0 + 0.5	13.0 ± 0.2	9.00 ± 0.5	12.0 ± 0.15	-	3,000

Tape Specifications & Tape Material (Unit : mm)

Type	A	B	T	W	P	F	K	Tape Type
ML03	1.05	1.85	0.95	8.0	4.0	3.5	-	B
ML05(≤ 2.2uH)	1.50	2.42	0.95	8.0	4.0	3.5	-	B
ML05(≥ 2.7uH)	1.50	2.35	1.45	8.0	4.0	3.5	0.22	A
ML06	1.88	3.50	1.27	8.0	4.0	3.5	0.22	A
MLH05	1.45	2.25	0.95	8.0	4.0	3.5	-	B
MLH06	1.88	2.40	1.23	8.0	4.0	3.5	0.23	A
MLH08	2.20	2.85	1.40	8.0	4.0	3.5	0.23	A

Note:
1. Please make sure that your product is has been evaluated and confirmed against your specifications when our product is mounted to your product.
2. Do not knock nor drop.
3. All the items and parameters in this product specification have been prescribed on the premise that our product is used for the purpose, under the condition and in the environment agreed upon between you and us. You are requested not to use our product deviating from such agreement.

Download de Arquivos

Ficha Técnica

Indutor de Chip Ferrite Multicamada - Série ML

PROCURAR

Pesquisa de condição: Pesquisa cruzada

Melhor Venda

Indutor de Chip de Ferrite Multicamada (Série ML ML05MT82N)Fabricante - Viking

Com sede em Taiwan, Viking Tech Corporation é um dos principais fabricantes de Indutor de Chip de Ferrite Multicamada (Série ML ML05MT82N) desde 1997.E seus produtos são utilizados em aplicações automotivas e de dispositivos eletrônicos, com tolerância de fabricação de até 0,01% e TCR de até 2 ppm em uma ampla variedade de tamanhos de embalagem.

TS16949/ ISO9001/ ISO14001 e atende aos padrões AEC-Q200, Viking tem oferecido resistores de precisão de alta voltagem, alta potência, anti-sulfur, anti-surge, pulso, incluindo resistores de filme fino/ espesso, resistores automotivos, resistores melf, resistores de detecção de corrente, etc. Indutores de baixo ruído, baixo TC, alta potência, como indutores de RF, indutores de chip, indutores de potência, indutores variáveis, indutores de chip de ferrite, indutores blindados, indutores de fio enrolado e indutores de mergulho.

Indutor de Chip de Ferrite Multicamada (Série ML ML05MT82N)tem oferecido aos clientes resistores de potência, indutores de potência e capacitores eletrolíticos de alumínio de alta qualidade com sólida reputação. Com tecnologia avançada e 25 anos de experiência, Viking garante atender às demandas de cada cliente.