REACH-verklaring - SVHC(Hsin Chu).pdf
AUTOMOBIEL TOEPASSINGEN
Dunne film precisie weerstand 0,01%, TC2ppm, draadgebonden, anti-corrosief, MELF. Stroomdetectie, Metaal,...
Lees verderFerrite draadgewonden spoelen (NL-serie)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Draadgewonden chip ferrietinductor, hoge stroom, verkrijgbaar in gegoten en open type. Kleine afmetingen tot 0603, zeer sterke soldeerbaarheid door golfsolderen of soldeerbout, golfsolderen. Zeer bestand tegen mechanische schokken en druk. Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid. Super Q-eigenschappen.
Kenmerken
- Zeer sterke soldeerbaarheid door golfsolderen, soldeerbout of golfsolderen.
- Zeer nauwkeurige afmetingen, kan automatisch worden gemonteerd.
- Terminals zijn zeer bestand tegen trekkrachten.
- Zeer bestand tegen mechanische schokken en druk.
- Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid Super Q-eigenschappen.
- Vochtgevoeligheidsniveau 1 (alleen NL10(C) / NL12(C))
Toepassingen
- Micro-televisies, vloeibare kristaltelevisies, videocamera's, draagbare videorecorders, autoradio's, autoradio's, dunne bandradio's, televisietuners, mobiele telefoons, radio en andere elektronische apparaten.
Constructie
Kleurcodering
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Onderdelenummering
Standaard Elektrische Specificaties
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Bestanden downloaden
-
- RoHS Rapport
-
-
- BEREIK
| Image | Grootte | Tolerantie | Inductantie | Testconditie | DCR (Ω) max. | IDC (A) | Q | SRF | Bestanden downloaden | Actie |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KTC820) 
|
1210 |
±10% |
82 |
2.52MHz |
8.71 |
80 |
20 |
9 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KTC101)
|
1210 |
±10% |
100 |
0.796MHz |
10.14 |
75 |
20 |
8 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC1R0)
|
1812 |
±10% |
1 |
7.96MHz |
0.11 |
1050 |
10 |
200 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC1R2)
|
1812 |
±10% |
1.2 |
7.96MHz |
0.12 |
1000 |
10 |
160 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC1R5)
|
1812 |
±10% |
1.5 |
7.96MHz |
0.15 |
950 |
10 |
130 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC1R8)
|
1812 |
±10% |
1.8 |
7.96MHz |
0.16 |
900 |
10 |
100 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC2R2)
|
1812 |
±10% |
2.2 |
7.96MHz |
0.18 |
850 |
10 |
80 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC2R7)
|
1812 |
±10% |
2.7 |
7.96MHz |
0.2 |
800 |
10 |
60 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC3R3)
|
1812 |
±10% |
3.3 |
7.96MHz |
0.22 |
750 |
10 |
45 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC3R9)
|
1812 |
±10% |
3.9 |
7.96MHz |
0.24 |
700 |
10 |
40 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC4R7)
|
1812 |
±10% |
4.7 |
7.96MHz |
0.27 |
650 |
10 |
35 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC5R6)
|
1812 |
±10% |
5.6 |
7.96MHz |
0.3 |
650 |
10 |
30 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC6R8)
|
1812 |
±10% |
6.8 |
7.96MHz |
0.35 |
600 |
10 |
28 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC8R2)
|
1812 |
±10% |
8.2 |
7.96MHz |
0.4 |
600 |
10 |
25 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC100)
|
1812 |
±10% |
10 |
2.52MHz |
0.5 |
550 |
10 |
22 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC120)
|
1812 |
±10% |
12 |
2.52MHz |
0.6 |
500 |
10 |
21 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC150)
|
1812 |
±10% |
15 |
2.52MHz |
0.7 |
450 |
10 |
20 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC180)
|
1812 |
±10% |
18 |
2.52MHz |
0.8 |
400 |
10 |
19 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC220)
|
1812 |
±10% |
22 |
2.52MHz |
0.9 |
370 |
10 |
18 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC270)
|
1812 |
±10% |
27 |
2.52MHz |
1.2 |
330 |
10 |
16 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC330)
|
1812 |
±10% |
33 |
2.52MHz |
1.4 |
300 |
10 |
14 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC390)
|
1812 |
±10% |
39 |
2.52MHz |
1.6 |
280 |
10 |
12 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC470)
|
1812 |
±10% |
47 |
2.52MHz |
1.9 |
260 |
10 |
11.5 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC560)
|
1812 |
±10% |
56 |
2.52MHz |
2.2 |
240 |
10 |
11 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC680)
|
1812 |
±10% |
68 |
2.52MHz |
2.6 |
220 |
10 |
10 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC820)
|
1812 |
±10% |
82 |
2.52MHz |
3.5 |
200 |
10 |
9 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC101)
|
1812 |
±10% |
100 |
0.796MHz |
4 |
180 |
20 |
8 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC121)
|
1812 |
±10% |
120 |
0.796MHz |
4.5 |
160 |
20 |
7.5 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC151)
|
1812 |
±10% |
150 |
0.796MHz |
6.5 |
140 |
20 |
7 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC181)
|
1812 |
±10% |
180 |
0.796MHz |
7.5 |
120 |
20 |
6.5 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC221)
|
1812 |
±10% |
220 |
0.796MHz |
9 |
120 |
20 |
5.5 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC271)
|
1812 |
±10% |
270 |
0.796MHz |
11 |
100 |
20 |
5 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC331)
|
1812 |
±10% |
330 |
0.796MHz |
13 |
90 |
20 |
4 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC391)
|
1812 |
±10% |
390 |
0.796MHz |
23 |
80 |
20 |
3.8 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC471)
|
1812 |
±10% |
470 |
0.796MHz |
26 |
75 |
20 |
3.5 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC561)
|
1812 |
±10% |
560 |
0.796MHz |
30 |
70 |
20 |
2.8 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC681)
|
1812 |
±10% |
680 |
0.796MHz |
40 |
65 |
20 |
2.6 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL12KTC821)
|
1812 |
±10% |
820 |
0.796MHz |
45 |
60 |
20 |
2.5 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC1R0)
|
2220 |
±10% |
1 |
7.96MHz |
0.03 |
1800 |
10 |
95 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC1R2)
|
2220 |
±10% |
1.2 |
7.96MHz |
0.035 |
1700 |
10 |
70 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC1R5)
|
2220 |
±10% |
1.5 |
7.96MHz |
0.04 |
1600 |
10 |
55 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC1R8)
|
2220 |
±10% |
1.8 |
7.96MHz |
0.05 |
1400 |
10 |
47 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC2R2)
|
2220 |
±10% |
2.2 |
7.96MHz |
0.06 |
1300 |
10 |
42 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC2R7)
|
2220 |
±10% |
2.7 |
7.96MHz |
0.07 |
1200 |
10 |
37 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC3R3)
|
2220 |
±10% |
3.3 |
7.96MHz |
0.08 |
1120 |
10 |
34 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC3R9)
|
2220 |
±10% |
3.9 |
7.96MHz |
0.09 |
1050 |
10 |
32 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC4R7)
|
2220 |
±10% |
4.7 |
7.96MHz |
0.11 |
950 |
10 |
29 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL20KTC5R6)
|
2220 |
±10% |
5.6 |
7.96MHz |
0.13 |
880 |
10 |
26 |
|
Toevoegen aan lijst |
|---|
Toepassing
MEDISCHE TOEPASSINGEN
Keramische hoogfrequente chip spoelen, klein formaat tot 01005. Dunne film, meerlaags, draadgewonden,...
Lees verder
COMMUNICATIE TOEPASSINGEN
Multilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder