REACH-verklaring - SVHC(Hsin Chu).pdf
AUTOMOBIEL TOEPASSINGEN
Dunne film precisie weerstand 0,01%, TC2ppm, draadgebonden, anti-corrosief, MELF. Stroomdetectie, Metaal,...
Lees verderFerrite draadgewonden spoelen (NL-serie)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Draadgewonden chip ferrietinductor, hoge stroom, verkrijgbaar in gegoten en open type. Kleine afmetingen tot 0603, zeer sterke soldeerbaarheid door golfsolderen of soldeerbout, golfsolderen. Zeer bestand tegen mechanische schokken en druk. Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid. Super Q-eigenschappen.
Kenmerken
- Zeer sterke soldeerbaarheid door golfsolderen, soldeerbout of golfsolderen.
- Zeer nauwkeurige afmetingen, kan automatisch worden gemonteerd.
- Terminals zijn zeer bestand tegen trekkrachten.
- Zeer bestand tegen mechanische schokken en druk.
- Zeer betrouwbaar in omgevingen met plotselinge temperatuurveranderingen en vochtigheid Super Q-eigenschappen.
- Vochtgevoeligheidsniveau 1 (alleen NL10(C) / NL12(C))
Toepassingen
- Micro-televisies, vloeibare kristaltelevisies, videocamera's, draagbare videorecorders, autoradio's, autoradio's, dunne bandradio's, televisietuners, mobiele telefoons, radio en andere elektronische apparaten.
Constructie
Kleurcodering
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Onderdelenummering
Standaard Elektrische Specificaties
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Bestanden downloaden
-
- RoHS Rapport
-
-
- BEREIK
| Image | Grootte | Tolerantie | Inductantie | Testconditie | DCR (Ω) max. | IDC (A) | Q | SRF | Bestanden downloaden | Actie |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTC180) 
|
0805 |
±5% |
18 |
2.52MHz |
2.01 |
280 |
15 |
27 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTC220)
|
0805 |
±5% |
22 |
2.52MHz |
2.28 |
240 |
15 |
20 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTC270)
|
0805 |
±5% |
27 |
2.52MHz |
2.6 |
220 |
15 |
17 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTC330)
|
0805 |
±5% |
33 |
2.52MHz |
3.05 |
200 |
15 |
17 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTC470)
|
0805 |
±5% |
47 |
2.52MHz |
4.42 |
160 |
14 |
15 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTC560)
|
0805 |
±5% |
56 |
2.52MHz |
5.74 |
150 |
14 |
10 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTC680)
|
0805 |
±5% |
68 |
2.52MHz |
5.78 |
140 |
14 |
10 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTC820)
|
0805 |
±5% |
82 |
2.52MHz |
9.75 |
100 |
14 |
10 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL05JTC101)
|
0805 |
±5% |
100 |
1MHz |
9.75 |
100 |
10 |
9 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTCR22)
|
1008 |
±5% |
0.22 |
25.2MHz |
0.15 |
2600 |
35 |
800 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTCR47)
|
1008 |
±5% |
0.47 |
25.2MHz |
0.2 |
2400 |
35 |
460 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTCR68)
|
1008 |
±5% |
0.68 |
25.2MHz |
0.3 |
2200 |
35 |
400 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTCR82)
|
1008 |
±5% |
0.82 |
25.2MHz |
0.35 |
1800 |
35 |
360 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC1R0)
|
1008 |
±5% |
1 |
7.96MHz |
0.35 |
800 |
22 |
245 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC1R2)
|
1008 |
±5% |
1.2 |
7.96MHz |
0.4 |
550 |
25 |
230 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC1R5)
|
1008 |
±5% |
1.5 |
7.96MHz |
0.45 |
550 |
25 |
182 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC1R8)
|
1008 |
±5% |
1.8 |
7.96MHz |
0.55 |
550 |
25 |
135 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC2R2)
|
1008 |
±5% |
2.2 |
7.96MHz |
0.6 |
500 |
22 |
105 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC2R7)
|
1008 |
±5% |
2.7 |
7.96MHz |
0.7 |
500 |
25 |
70 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC3R3)
|
1008 |
±5% |
3.3 |
7.96MHz |
0.75 |
450 |
22 |
55 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC3R9)
|
1008 |
±5% |
3.9 |
7.96MHz |
0.8 |
450 |
25 |
50 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC4R7)
|
1008 |
±5% |
4.7 |
7.96MHz |
0.9 |
400 |
22 |
45 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC5R6)
|
1008 |
±5% |
5.6 |
7.96MHz |
1.05 |
400 |
22 |
42 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC6R8)
|
1008 |
±5% |
6.8 |
7.96MHz |
1.05 |
400 |
22 |
40 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC8R2)
|
1008 |
±5% |
8.2 |
7.96MHz |
1.3 |
350 |
22 |
36 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC100)
|
1008 |
±5% |
10 |
2.52MHz |
1.55 |
300 |
20 |
35 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC120)
|
1008 |
±5% |
12 |
2.52MHz |
2.1 |
280 |
20 |
30 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC150)
|
1008 |
±5% |
15 |
2.52MHz |
2.38 |
250 |
20 |
24 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC180)
|
1008 |
±5% |
18 |
2.52MHz |
2.6 |
200 |
20 |
20 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC220)
|
1008 |
±5% |
22 |
2.52MHz |
2.92 |
200 |
20 |
18 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC330)
|
1008 |
±5% |
33 |
2.52MHz |
4.1 |
180 |
20 |
16 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC470)
|
1008 |
±5% |
47 |
2.52MHz |
7.8 |
350 |
23 |
17 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC101)
|
1008 |
±5% |
100 |
1MHz |
13.2 |
200 |
13 |
4 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC221)
|
1008 |
±5% |
220 |
1MHz |
26.5 |
140 |
13 |
3 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL08JTC331)
|
1008 |
±5% |
330 |
1MHz |
32.5 |
110 |
13 |
2 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10MTC1R0)
|
1210 |
±20% |
1 |
7.96MHz |
0.156 |
770 |
10 |
100 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10MTC1R5)
|
1210 |
±20% |
1.5 |
7.96MHz |
0.195 |
580 |
10 |
80 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10MTC2R2)
|
1210 |
±20% |
2.2 |
7.96MHz |
0.26 |
480 |
10 |
65 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10MTC3R3)
|
1210 |
±20% |
3.3 |
7.96MHz |
0.325 |
400 |
10 |
55 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10MTC4R7)
|
1210 |
±20% |
4.7 |
7.96MHz |
0.52 |
320 |
10 |
45 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10MTC6R8)
|
1210 |
±20% |
6.8 |
7.96MHz |
0.65 |
280 |
10 |
35 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KTC100)
|
1210 |
±10% |
10 |
2.52MHz |
1.105 |
220 |
15 |
28 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KTC150)
|
1210 |
±10% |
15 |
2.52MHz |
1.69 |
180 |
15 |
25 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KTC220)
|
1210 |
±10% |
22 |
2.52MHz |
2.6 |
145 |
15 |
20 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KTC270)
|
1210 |
±10% |
27 |
2.52MHz |
3 |
125 |
15 |
17 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KTC330)
|
1210 |
±10% |
33 |
2.52MHz |
3.64 |
115 |
15 |
15 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KTC470)
|
1210 |
±10% |
47 |
2.52MHz |
5.46 |
105 |
20 |
13 |
|
Toevoegen aan lijst |
Draadgewonden Chip Spoel(Ferrite) (NL Serie NL10KTC680)
|
1210 |
±10% |
68 |
2.52MHz |
8.45 |
85 |
20 |
10 |
|
Toevoegen aan lijst |
|---|
Toepassing
MEDISCHE TOEPASSINGEN
Keramische hoogfrequente chip spoelen, klein formaat tot 01005. Dunne film, meerlaags, draadgewonden,...
Lees verder
COMMUNICATIE TOEPASSINGEN
Multilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder