차폐된 SMD 전원 인덕터 (PCS 시리즈 PCS124MT220)
PCS124MT220
자기 차폐형 SMD 파워 인덕터, 소형, 낮은 프로파일, 낮은 DCR 및 큰 전류, 방사선에 대한 자기 차폐 기능.
PCS Series124 ±20% 22μH 0.066 Ω 2.9A
| 크기 | 허용 오차 | 인덕턴스 | DCR (Ω) 최대값 | IDC (A) |
|---|---|---|---|---|
| 124 | ±20% | 22 | 0.066 | 2.9 |
높은 전류 전기 사양
PCSH127 Type(□:Tolerance)
| Part No. | L (μH) | Tolerance | Test Condition | DCR (Ω) Max | IDC (A) Max |
|---|---|---|---|---|---|
| PCSH127□T2R2 | 2.2 | N | 100KHz, 0.25V | 0.007 | 25.5 |
| PCSH127□T4R7 | 4.7 | N | 100KHz, 0.25V | 0.016 | 15.9 |
| PCSH127□T5R6 | 5.6 | N | 100KHz, 0.25V | 0.020 | 14.0 |
| PCSH127□T6R8 | 6.8 | N | 100KHz, 0.25V | 0.021 | 13.3 |
| PCSH127□T8R2 | 8.2 | N | 100KHz, 0.25V | 0.023 | 12.2 |
| PCSH127□T100 | 10 | M | 100KHz, 0.25V | 0.024 | 11.2 |
| PCSH127□T150 | 15 | M | 100KHz, 0.25V | 0.031 | 9.00 |
| PCSH127□T180 | 18 | M | 100KHz, 0.25V | 0.035 | 7.70 |
| PCSH127□T220 | 22 | M | 100KHz, 0.25V | 0.040 | 7.57 |
| PCSH127□T330 | 33 | M | 100KHz, 0.25V | 0.070 | 6.22 |
| PCSH127□T390 | 39 | M | 100KHz, 0.25V | 0.075 | 5.40 |
| PCSH127□T470 | 47 | M | 100KHz, 0.25V | 0.080 | 5.28 |
| PCSH127□T560 | 56 | M | 100KHz, 0.25V | 0.130 | 4.50 |
| PCSH127□T680 | 68 | M | 100KHz, 0.25V | 0.105 | 4.26 |
| PCSH127□T820 | 82 | M | 100KHz, 0.25V | 0.143 | 3.80 |
| PCSH127□T101 | 100 | M | 100KHz, 0.25V | 0.163 | 3.52 |
| PCSH127□T121 | 120 | M | 100KHz, 0.25V | 0.170 | 3.20 |
| PCSH127□T151 | 150 | M | 100KHz, 0.25V | 0.247 | 3.01 |
| PCSH127□T221 | 220 | M | 100KHz, 0.25V | 0.376 | 2.36 |
| PCSH127□T331 | 330 | M | 100KHz, 0.25V | 0.574 | 2.00 |
| PCSH127□T391 | 390 | M | 100KHz, 0.25V | 0.650 | 1.50 |
| PCSH127□T471 | 470 | M | 100KHz, 0.25V | 0.861 | 1.64 |
| PCSH127□T681 | 680 | M | 100KHz, 0.25V | 1.080 | 1.38 |
| PCSH127□T821 | 820 | M | 100KHz, 0.25V | 1.470 | 1.26 |
| PCSH127□T102 | 1000 | M | 100KHz, 0.25V | 1.660 | 1.14 |
■Viking is capable to design according to customer special requirement
테이프 및 릴 사양 (단위: mm)
| Type | Tape Size | Parts Per Reel | |
|---|---|---|---|
| W | P | 13" | |
| PCS62B | 16 | 12 | 1500 |
| PCS64B | 16 | 12 | 1000 |
| PCS73 | 16 | 12 | 1000 |
| PCS74 | 16 | 12 | 1000 |
| PCS124 | 24 | 16 | 500 |
| PCS125 | 24 | 16 | 400 |
| PCS127 | 24 | 16 | 400 |
| PCS129 | 24 | 16 | 300 |
| PCSH127 | 24 | 16 | 500 |
SMT 파워 인덕터 환경 사양
General
| Item | Specification |
|---|---|
| Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: <80% relative humidity. Recommended product should be used within one year from the time of delivery. |
Environmental Test
| Test Items | Specification | Test Conditions / Test Methods |
|---|---|---|
| High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
| Low temperature Storage test | Temperature -25 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
| Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
| Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
| Test Items | Specification | Test Conditions / Test Methods |
|---|---|---|
| Solder Ability Test | Terminal area must have 90% minimum solder coverage. | Dip pads in flux then dip in solder pot (SnCuNi) at 245 ± 5°C for 3 seconds. |
| Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
| Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
| Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
리플로우
The Condition Of Reflow (Recommendation):
코드
- 220
- 파일 다운로드
-
-
주요 제품
