
SMD 전원 인덕터 (PCDS 시리즈 PCDS74BMT221)
PCDS74BMT221
차폐된 SMD 전력 인덕터, 소형, 낮은 프로파일, 낮은 DCR 및 큰 전류, 방사선으로부터 자기로 차폐됩니다.
PCDS Series74B ±20% 220μH 1.18 Ω 0.36A
크기 | 허용오차 | 인덕턴스 | 테스트 조건 | DCR (Ω) 최대. | IDC (A) |
---|---|---|---|---|---|
74B | ±20% | 220 | 1KHz, 0.25V | 1.18 | 0.36 |
테이프 및 릴 사양 (단위: mm)

Type | Tape Size | Parts Per Reel | |
---|---|---|---|
W | P | 13" | |
PCDS63B | 12 | 8 | 1500 |
PCDS74B | 16 | 12 | 1000 |
PCDS105B | 24 | 12 | 750 |
PCDS125B | 24 | 16 | 500 |
SMD 전원 인덕터 환경 사양
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: < 80% relative humidity. Recommended product should be used within one year from the time of delivery. |
Environmental Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -40 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
Solderability test | Terminal area must have 90% minimum solder coverage. | Product with Lead-free terminal: Dip pads in flux then dip in solder pot at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
리플로우
The Condition Of Reflow (Recommendation):

코드
- 221
0
베스트 판매
주요 제품


