APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, con cable de unión, anticorrosivo, MELF. Detección...
Lee masInductor de potencia DIP (Serie DRGH DRGH654MT820)
DRGH654MT820
Inductor de alambre de alta potencia para inmersión.
DRGH Series654 ±20% 82μH 0.55 Ω 0.47A
| Tamaño | Tolerancia | Inductancia | Condición de prueba | DCR (Ω) máx. | IDC (A) |
|---|---|---|---|---|---|
| 654 | ±20% | 82 | 1KHz, 0.1V | 0.55 | 0.47 |
Confiabilidad del Inductor de Potencia de Alambre de Ferrita DIP
Mechanical Performance
| Item | Specification | Test Method |
|---|---|---|
| Vibration | Appearance: No damage L change: within ± 10% RDC: within specification |
Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1min Amplitude: 1.5mm Time: 2hrs for each axis (X, Y & Z), total 6hrs |
| Resistance to Soldering Heat | Appearance: No Damage | Pre-heating: 150°C, 1Min. Solder Composition: Sn / Ag / Cu = 95.6 / 3.0 / 0.5 Solder Temperature: 260 ± 5°C Immersion Time: 4 ± 1Sec. |
| Solderability | The electrodes shall be at least 90% covered with new solder coating. | Pre-heating: 150°C, 1min Solder Composition: Sn / Ag / Cu = 95.6 / 3.0 / 0.5 Solder Temperature: 245 ± 5°C Immersion Time: 4 ± 1sec |
Environmental Performance
| Item | Specification | Test Method | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Temperature Shock | Appearance: No damage L change: within ± 10% RDC: within specification |
10 cycles (Air to Air) 1 cycles shall consist of: 30 minutes exposure to –55 °C 30 minutes exposure to 125 °C 15 seconds maximum transition between temperatures |
||||||||||||||
| Temperature Cycle | One cycle:
Total: 100cycles |
|||||||||||||||
| Humidity Resistance | Temperature: 40 ± 2°C Relative Humidity: 90 ~ 95% Time: 1000hrs Measured after exposure in the room condition for 24hrs |
|||||||||||||||
| Heat Temperature Resistance | Temperature: 85 ± 3°C Relative Humidity: 20% Applied Current: Rated Current Time: 1000hrs Measured after exposure in the room condition for 24hrs |
|||||||||||||||
| Low Temperature Resistance | Temperature: -25 ± 3°C Relative Humidity: 0% Time: 1000hrs Measured after exposure in the room condition for 24hrs |
☑ Storage Temperature: 15 ~ 28°C; < 80% RH
Reflujo
Embalaje
| Type | Parts Plate | Parts Per Bind |
|---|---|---|
| DRGH664 | 200 | 2400 |
| DRGH855 | 200 | 2400 |
| DRGH875 | 200 | 2400 |
| DRGH895 | 200 | 2400 |
| DRGH110 | 144 | 1296 |
Código
- 820
- Descarga de Archivos
-
-
Producto Principal
APLICACIONES MÉDICAS
Inductores de chip de alta frecuencia cerámicos, tamaño pequeño hasta 01005. Película delgada, multicapa,...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alto Q, baja TCR....
Lee mas