Resistor de Chip de Matriz de Película Gruesa (Serie CN CN-21FL6--46K4)

'VIKING TECH' tiene experiencia en el diseño de componentes innovadores, ofreciendo soporte y servicio a clientes globales que demandan un auténtico socio de fabricación. Nuestro objetivo es ser líderes en el diseño, fabricación y comercialización de componentes pasivos de precisión en miniatura utilizados en aplicaciones automotrices, industriales y electrónicas 3C.

Resistor de Chip de Matriz de Película Gruesa (Serie CN CN-21FL6--46K4)

CN-21FL6--46K4

Resistor de Chip de Matriz de Película Gruesa (Serie CN CN-21FL6--46K4)
Resistor de Chip de Matriz de Película Gruesa (Serie CN CN-21FL6--46K4) Files Download

Resistor de chip de matriz de película gruesa - Serie CN
CN,CAN Series0201 ±1% 200 1/32W Series46.4KΩ 10k/Reel

TamañoToleranciaTCR (ppm /℃)PotenciaResistencia (Ohmio)Paquete
0201±1%2001/32W46.4K10k/Reel

Diagrama de circuito equivalente

Thick Film Array Chip Resistor - CN Series Equivalent Circuit Diagram

Características ambientales

Item Requirement Test Method
±1% ±5% Jumper
Temperature Coefficient of
Resistance (T.C.R.)
As Spec. JIS-C-5201-1 4.8
IEC-60115-1 4.8
-55°C~+125°C, 25°C is the reference temperature
Short Time Overload ±(1.0%+0.05Ω)
CNA42/43:
±(2.0%+0.05Ω)
±(2.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.13
IEC-60115-1 4.13
RCWV*2.5 or Max. Overload Voltage whichever is lower for 5 seconds
Insulation Resistance ³10G JIS-C-5201-1 4.6
IEC-60115-1 4.6
Max. Overload Voltage for 1 minute
Endurance ±(2.0%+0.10Ω) ±(3.0%+0.10Ω) <50mΩ
CN-21/41&
CNA42/43:
<100mΩ
JIS-C-5201-1 4.25
IEC-60115-1 4.25.1
70±2°C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF”
Damp Heat with Load ±(2.0%+0.10Ω) ±(3.0%+0.10Ω) <50mΩ
CNA42/43:
<100mΩ
JIS-C-5201-1 4.24
IEC-60115-1 4.24
40±2°C, 90~95% R.H., RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF”
Dry Heat ±(1.0%+0.05Ω) ±(1.5%+0.10Ω)
CN-21/41:
±(3.0%+0.10Ω)
<50mΩ
CN-21/41:
<100mΩ
JIS-C-5201-1 4.23
IEC-60115-1 4.23.2
at +125/+155°C for 1000 hrs
Bending Strength ±(1.0%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.33
IEC-60115-1 4.33
Bending once for 5 seconds with 3mm
Solderability 95% min. coverage JIS-C-5201-1 4.17
IEC-60115-1 4.17
245±5°C for 3 seconds
Resistance to Soldering Heat ±(0.5%+0.05Ω)
CNA42/43:
±(1%+0.05Ω)
±(1.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.18
IEC-60115-1 4.18
260±5°C for 10 seconds
Voltage Proof No breakdown or flashover JIS-C-5201-1 4.7
IEC-60115-1 4.7
1.42 times Max. Operating Voltage for 1 minute
Leaching Individual leaching area ≦5%
Total leaching area ≦ 10%
JIS-C-5201-1 4.18
IEC-60068-2-58 8.2.1
260±5°C for 30 seconds
Rapid Change of Temperature ±(0.5%+0.05Ω) ±(1.0%+0.05Ω) <50mΩ JIS-C-5201-1 4.19
IEC-60115-1 4.19
-55°C to +125/+155°C, 5 cycles

RCWV(Rated Continuous Working Voltage)=√(P*R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15~28°C; Humidity < 80%RH

Condición de soldadura

Soldering Condition (IPC/JEDEC J-STD-020)

Marcado

No Marking for CN-21/CN-41/CNA42
Jumper for all: Letter “0”
1% for CN-42/CN-43/CNA43:
4 digits marking (non-including E24 series)
Example:
Resistance 102Ω 2.49KΩ 30K1Ω 49.9MΩ 121KΩ
Marking 1020 2491 3012 4992 1213
5% for CN-42/CN-43/CNA43: 3 digits marking in E24
Example: 101=100Ω 102=1KΩ (1st and 2nd are E24 code and 3rd code is multiplier)

E24 code 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91

Embalaje

Reel Specifications & Packaging Quantity

Packing Quantity & Reel Specifications
Type Packaging Quantity Tape Width Reel Diameter ΦA (mm) ΦB (mm) ΦC (mm) W (mm) T (mm)
CN-21
CN-41
Paper 10K 8mm 7 inch 178.5±1.5 60+1/-0 13.0±0.2 9.0±0.5 12.5±0.5
CN-42
CNA42
Paper 10K 8mm 7 inch 178.5±1.5 60+1/-0 13.0±0.2 9.0±0.5 12.5±0.5
20K 8mm 10 inch 254±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
40K 8mm 13 inch 330±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
CN-43
CNA43
Paper 5K 8mm 7 inch 178.5±1.5 60+1/-0 13.0±0.2 9.0±0.5 12.5±0.5
10K 8mm 10 inch 254±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5
20K 8mm 13 inch 330±1.0 100±0.5 13.0±0.2 9.5±0.5 13.5±0.5

Paper Tape Specifications

Paper Tape Specifications
Type A (mm) B (mm) W (mm) E (mm) F (mm) P0 (mm) P1 (mm) P2 (mm) ΦD0 (mm) T (mm)
CN-21 0.77±0.05 0.97±0.05 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 2.0±0.05 2.0±0.05 1.50+0.1,-0 0.50±0.1
CN-41 0.77±0.05 1.57±0.05 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 2.0±0.05 2.0±0.05 1.50+0.1,-0 0.50±0.1
CN-42 1.20±0.1 2.20±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 2.0±0.05 2.0±0.05 1.50+0.1,-0 0.70±0.1
CN-43 1.95±0.1 3.50±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.05 2.0±0.05 1.50+0.1,-0 0.85±0.1
CNA42 1.20±0.1 2.20±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 2.0±0.05 2.0±0.05 1.50+0.1,-0 0.70±0.1
CNA43 1.95±0.1 3.50±0.1 8.0±0.2 1.75±0.1 3.5±0.05 4.0±0.1 4.0±0.05 2.0±0.05 1.50+0.1,-0 0.85±0.1

Código

  • 46K4
Descargar archivos


BÚSQUEDA

Búsqueda de condiciones:      Búsqueda cruzada

Menú

Mejor Venta

Viking Introduction

Viking Tech Corporation is Taiwán supplier and manufacturer in Proveedor certificado de inductor de RF Viking has been offering our customers high quality Resistor de precisión de película delgada, resistor de detección de corriente, inductor de chip cerámico de RF, inductor de potencia, resistor de película delgada MELF, resistor de película gruesa, MLCC, capacitor de chip de múltiples capas, chip de ferrita, resistor de potencia, Resistor anti-sulfuro, resistor de alta tensión, resistor anti-sobretensión, resistor anti-pulso. Matriz de resistores, resistor con plomo, capacitor electrolítico sólido de aluminio since 1997. With both advanced technology and 25 years experience, Viking always make sure to meet each customer's demand.


Producto Principal

APLICACIONES AUTOMOTRICES

APLICACIONES AUTOMOTRICES

Resistor de película delgada de precisión 0.01%, TC2ppm, wirebondale, Anti-Corrosivo, MELF. Detección...

Lee mas
APLICACIONES MÉDICAS

APLICACIONES MÉDICAS

Inductores de chip de cerámica de alta frecuencia, tamaño pequeño hasta 01005. Película delgada,...

Lee mas
APLICACIONES DE COMUNICACIÓN

APLICACIONES DE COMUNICACIÓN

El capacitor cerámico multicapa ofrece alto voltaje, alta frecuencia, bajo ruido, alto Q, bajo TCR....

Lee mas