AUTOMOBILANWENDUNGEN
Dünnschicht-Präzisionswiderstand 0,01%, TC2ppm, Drahtbondable, Antikorrosiv, MELF. Stromsensoren, Metall,...
WeiterlesenTO-220 Leistungswiderstand (TR30 Serie TR30FBE1600)
TR30FBE1600
Hochleistungswiderstand, Dickschicht mit verpacktem TO220. Anwendungen sind Schaltnetzteil und Snubber-Schaltung, Steuerung von Automatikmaschinen, HF-Leistungsverstärker, Niederenergie-Impulslast, USV, Spannungsregelung, Entladewiderstände.
TR30 Series±1% 100 30W Series160Ω TO220
| Toleranz | TCR (ppm /℃) | Leistung | Widerstand (Ohm) | Verpackung |
|---|---|---|---|---|
| ±1% | 100 | 30W | 160 | TO220 |
Spezifikationen der elektrischen Eigenschaften
| Item Type |
Resistance Range | TCR (PPM/°C) | |||
|---|---|---|---|---|---|
| ±0.5% | ±1% | ±5% | ±10% | ||
| TR30 | - | - | 0.05Ω - 0.1Ω | No Specified | |
| - | ≧0.1Ω - 1Ω | No Specified | |||
| - | ≧1Ω - 5Ω | ±100 ±200 ±300 |
|||
| ≧10Ω - 100KΩ | ±50 ±100 ±200 |
||||
| ≧5Ω - 10Ω | ±100 ±200 ±300 |
||||
☑ Operating Voltage: 420V Max.
☑ Dielectric Strength: 1800VAC
☑ Insulation Resistance: 10GΩ min.
☑ Working Temperature Range: -65°C to +150°C
Umwelteigenschaften
| Item | Requirement | Test Method |
|---|---|---|
| Temperature Coefficient of Resistance (T.C.R.) |
As Spec. | Referenced to 25°C, DR taken at +105°C |
| Short Time Overload | DR±0.3% | 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds |
| Load Life | DR±1.0% | 2,000 hours at rated power |
| Damp Heat with Load | DR±0.5% | 40±2°C, 90~95% R.H., RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” |
| Solderability | 90% min. coverage | 245±5°C for 3 seconds |
| Thermal Shock | DR±0.3% | -65°C~150°C, 100 cycles |
| Terminal Strength | DR±0.2% | (Pull Test) 2.4N |
| Vibration, High Frequency | DR±0.2% | 20g peak |
- Lead Material: Tinned Copper
- Maximum Torque: 0.9 N-m
- When in Free Air at 25°C, the TR30 is Rated for 2.25W
- The Case Temperature is to be used for the Definition of the Applied Power Limit
- The Case Temperature Measurement must be made with a Thermocouple Contacting the Center of the Component mounted on the Designed Heat Sink.
- Thermal Grease should be Applied Properly RCWV(Rated continuous working voltage)= √(P*R) or Max. Operating voltage whichever is lower
Code
- 1600
- Dateien herunterladen
-
Hauptprodukt
MEDIZINISCHE ANWENDUNGEN
Keramische Hochfrequenz-Chip-Induktoren, klein bis 01005. Dünnschicht-, Mehrschicht-, Drahtgewickelte-,...
Weiterlesen
KOMMUNIKATIONSANWENDUNGEN
Mehrschicht-Keramikkondensator bietet hohe Spannung, hohe Frequenz, geringes Rauschen, hohe Güte, niedrige...
Weiterlesen