![AUTOMOBILANWENDUNGEN](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
AUTOMOBILANWENDUNGEN
Dünnschicht-Präzisionswiderstand 0,01%, TC2ppm, Drahtbondbar, Antikorrosiv, MELF. Stromsensoren, Metall,...
WeiterlesenSMD-Hochleistungs-, Hochsättigungsinduktoren, ideale Induktoren für DC-DC-Wandler in allen 4C-Produkten.
PD Series3316 ±20% 6.8μH 0.027 Ω 4.6A
Größe | Toleranz | Induktivität | Testbedingung | DCR (Ω) max. | IDC (A) |
---|---|---|---|---|---|
3316 | ±20% | 6.8 | 100KHz, 0.1V | 0.027 | 4.6 |
Type | Tape Size | Parts Per Reel | |
---|---|---|---|
W | P | 13" | |
PD1608 | 16 | 8 | 2000 |
PD3308 | 24 | 12 | 1000 |
PD3316 | 24 | 12 | 1000 |
PD3340 | 24 | 16 | 225 |
PD5022 | 32 | 20 | 250 |
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: < 80% relative humidity. Recommended product should be used within one year from the time of delivery. |
Environmental Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 96 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -25 ± 2°C, Time: 96 ± 2 hours, Tested after 1hour at room temperature. |
|
Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
Solderability test | Terminal area must have 90% minimum solder coverage. | Dip pads in flux then dip in solder pot (SnCuNi) at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
The Condition Of Reflow (Recommendation):
Dünnschicht-Präzisionswiderstand 0,01%, TC2ppm, Drahtbondbar, Antikorrosiv, MELF. Stromsensoren, Metall,...
WeiterlesenKeramik-Hochfrequenz-Chip-Induktoren, kleine Größe bis 01005. Dünnschicht, Mehrschicht, Drahtgewickelt,...
WeiterlesenMultilayer Ceramic Kondensator bietet hohe Spannung, hohe Frequenz, geringes Rauschen, hohe Güte, geringe...
Weiterlesen