Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JT2R7)Hersteller

Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JT2R7)

NL05JT2R7

Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JT2R7) Files Download

Drahtgewickelte Chip-Ferritinduktoren, hoher Strom, in gegossener und offener Bauform erhältlich. Kleine Größe bis 0603, sehr gute Lötfähigkeit durch Wellenlöten oder Lötkolben, Wellenlöten. Hochbeständig gegen mechanische Stöße und Druck. Hochzuverlässig in Umgebungen mit plötzlichen Temperaturänderungen und Feuchtigkeit. Super Q-Eigenschaften.
NL Series0805 ±5% 2.7μH 1.2 Ω 320A 15 70

Größe	Toleranz	Induktivität	Testbedingungen	DCR (Ω) max.	IDC (A)	Q	SRF
0805	±5%	2.7	7.96MHz	1.2	320	15	70

Niedrigprofil-Elektrische Spezifikationen

NL05 Wound Chip Inductors (Ferrite / Open Type) / Low Profile Type

Codes	Inductance (uH)	Tolerance	Q min.	Test Freq. (MHz)	SRF (MHz) min.	DCR (Ω) max.	IDC (mA) max.
1R0	1.0	± 5, ± 10%	15	L: 7.96 / Q: 25.2	115	0.90	450
3R3	3.3	± 5, ± 10%	13	7.96	70	1.40	450
4R7	4.7	± 5, ± 10%	15	7.96	65	1.90	400
6R8	6.8	± 5, ± 10%	15	7.96	41	2.40	400
100	10	± 5, ± 10%	14	7.96	31	2.70	400
150	15	± 5, ± 10%	12	7.96	28	5.00	300
220	22	± 5, ± 10%	10	7.96	25	6.00	250

Spezifikationen für große Stromstärken

NL03 Wound Chip Inductors (Ferrite / Open Type) / Large Current Type

Codes	Inductance (uH)	Tolerance	Q min.	Test Freq. (MHz)	SRF (MHz) min.	DCR (Ω) max.	IDC (mA) max.	Color Code
47N	0.047	± 10%	12	7.9	2000	0.075	1800	White
51N	0.051	± 10%	12	7.9	1500	0.075	1800	Violet
56N	0.056	± 10%	7	7.9	1500	0.095	2200	Blue
68N	0.068	± 10%	10	7.9	1500	0.12	2200	Gray
72N	0.072	± 10%	12	7.9	1500	0.12	2200	Brown
R10	0.10	± 10%	12	7.9	1150	0.13	2200	Black
R12	0.12	± 5, ± 10%	12	7.9	1100	0.15	1900	Orange
R15	0.15	± 5, ± 10%	15	7.9	1050	0.15	1800	Brown
R18	0.18	± 5, ± 10%	15	7.9	950	0.15	1800	Green
R22	0.22	± 5, ± 10%	15	7.9	900	0.30	1300	Red
R24	0.24	± 5, ± 10%	15	7.9	850	0.16	1700	Green
R27	0.27	± 5, ± 10%	15	7.9	835	0.30	1400	Yellow
R33	0.33	± 5, ± 10%	15	7.9	725	0.40	1300	Orange
R36	0.36	± 5, ± 10%	15	7.9	720	0.41	1300	Green
R39	0.39	± 5, ± 10%	15	7.9	680	0.41	1200	Blue
R47	0.47	± 5, ± 10%	15	7.9	640	0.43	1200	Black
R56	0.56	± 5, ± 10%	15	7.9	630	0.44	1200	Brown
R65	0.65	± 5, ± 10%	15	7.9	510	0.52	1000	Blue
R68	0.68	± 5, ± 10%	15	7.9	510	0.52	1000	Red
R78	0.78	± 5, ± 10%	15	7.9	465	0.63	990	Orange
R82	0.82	± 5, ± 10%	15	7.9	460	0.69	990	Yellow
R90	0.90	± 5, ± 10%	15	7.9	350	0.81	950	Black
1R0	1.0	± 5, ± 10%	15	7.9	320	0.81	850	Green
1R2	1.2	± 5, ± 10%	15	7.9	270	0.87	850	Blue
1R5	1.5	± 5, ± 10%	15	7.9	230	0.96	830	Violet
1R8	1.8	± 5, ± 10%	15	7.9	210	1.10	820	Gray
2R2	2.2	± 5, ± 10%	15	7.9	115	1.20	720	White
2R7	2.7	± 5, ± 10%	15	7.9	100	1.38	700	Black
3R0	3.0	± 5, ± 10%	15	7.9	90	1.45	680	Black
3R3	3.3	± 5, ± 10%	15	7.9	84	1.50	640	Brown
3R9	3.9	± 5, ± 10%	15	7.9	75	1.50	630	Red
4R7	4.7	± 5, ± 10%	15	7.9	67	2.10	530	Orange
5R6	5.6	± 5, ± 10%	15	7.9	55	2.37	510	Yellow
6R8	6.8	± 5, ± 10%	15	7.9	48	3.10	490	Green
7R8	7.8	± 5, ± 10%	15	7.9	40	3.35	420	Blue
8R2	8.2	± 5, ± 10%	15	7.9	38	3.50	450	Violet
100	10	± 5, ± 10%	15	7.9	32	4.46	370	Gray
150	15	± 5, ± 10%	14	7.9	25	9.50	240	White

NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Large Current Type

Codes	Inductance (uH)	Tolerance	Q min.	Test Freq. (MHz)	SRF (MHz) min.	DCR (Ω) max.	IDC (mA) max.	Color Code
R10	0.10	± 10, ± 20%	9	7.9	1700	0.091	2400	Black
R15	0.15	± 10, ± 20%	12	7.9	1500	0.104	1900	Brown
R22	0.22	± 10, ± 20%	12	7.9	1200	0.130	1700	Red
R33	0.33	± 10, ± 20%	12	7.9	900	0.156	1400	Orange
R47	0.47	± 10, ± 20%	14	7.9	850	0.156	1400	Blue
R56	0.56	± 10, ± 20%	14	7.9	360	0.195	1200	Violet
R68	0.68	± 10, ± 20%	14	7.9	290	0.195	1200	Gray
R82	0.82	± 10, ± 20%	14	7.9	208	0.195	1100	White
1R0	1.00	± 10, ± 20%	14	7.9	208	0.169	1100	Black
1R2	1.20	± 10, ± 20%	14	7.9	159	0.208	960	Red
1R5	1.50	± 10, ± 20%	14	7.9	159	0.221	920	Brown
1R8	1.80	± 10, ± 20%	14	7.9	112	0.260	860	Orange
2R2	2.20	± 10, ± 20%	13	7.9	87	0.286	740	Red
2R7	2.70	± 10, ± 20%	13	7.9	72	0.325	680	Yellow
3R3	3.30	± 10, ± 20%	12	7.9	70	0.364	620	Orange
3R9	3.90	± 10, ± 20%	14	7.9	61	0.494	580	Green
4R7	4.70	± 10, ± 20%	14	7.9	51	0.559	520	Yellow
5R6	5.60	± 10, ± 20%	12	7.9	47	0.650	480	Blue
6R8	6.80	± 10, ± 20%	14	7.9	46	0.884	420	Green
8R2	8.20	± 10, ± 20%	13	7.9	33	0.949	400	Violet
100	10	± 5, ± 10,± 20%	14	2.5	31	1.105	360	Blue
120	12	± 5, ± 10,± 20%	14	2.5	30	1.17	340	Gray
150	15	± 5, ± 10,± 20%	15	2.5	28	1.82	300	Violet
180	18	± 5, ± 10,± 20%	15	2.5	27	2.01	280	White
220	22	± 5, ± 10,± 20%	15	2.5	20	2.288	240	Gray
270	27	± 5, ± 10,± 20%	15	2.5	17	2.60	220	Black
330	33	± 5, ± 10,± 20%	15	2.5	17	3.055	200	White
390	39	± 5, ± 10,± 20%	14	2.5	15	4.355	180	Brown
470	47	± 5, ± 10,± 20%	14	2.5	15	4.42	160	Black
560	56	± 5, ± 10,± 20%	14	2.5	10	5.746	150	Yellow
680	68	± 5, ± 10,± 20%	14	2.5	10	5.785	140	Brown
820	82	± 5, ± 10,± 20%	14	2.5	10	9.75	100	Orange
101	100	± 5, ± 10,± 20%	10	1	9	9.75	100	Red
221	220	± 5, ± 10,± 20%	8	1	4	30.03	70	Blue

NL08 Wound Chip Inductors (Ferrite / Open Type) / Large Current Type

Codes	Inductance (uH)	Tolerance	Q typ.	Test Freq. (MHz)	SRF (MHz) min.	DCR (Ω) max.	IDC (mA) max.	Color Code
Codes	Inductance (uH)	Tolerance	Q typ.	Test Freq. (MHz)	SRF (MHz) min.	DCR (Ω) max.	IDC (mA) max.	1st	2nd	3rd
78N	0.078	± 5, ± 10%	19	7.9	1000	0.042	3200	Black	Violet	Gray
R10	0.10	± 5, ± 10%	35	25	1500	0.05	3200	Brown	Red	Brown
R22	0.22	± 5, ± 10%	35	25	800	0.15	2900	Red	Red	Brown
R39	0.39	± 5, ± 10%	35	25	460	0.20	2100	Orange	White	Brown
R47	0.47	± 10%	35	25	460	0.20	2100	Yellow	Violet	Brown
R56	0.56	± 5, ± 10%	35	25	360	0.26	1800	Green	Blue	Brown
R68	0.68	± 5, ± 10%	35	25	400	0.30	1700	Blue	Gray	Brown
R82	0.82	± 5, ± 10%	35	25	360	0.35	1400	Gray	Red	Brown
1R0	1.0	± 10%	32	7.9	340	0.34	1700	Brown	Black	Red
1R1	1.1	± 10%	25	7.9	300	0.34	1500	Brown	Brown	Red
1R2	1.2	± 5, ± 10%	25	7.9	300	0.25	1600	Brown	Red	Red
1R5	1.5	± 5, ± 10%	32	7.9	230	0.42	1200	Brown	Green	Red
1R8	1.8	± 5, ± 10%	27	7.9	180	0.45	1100	Brown	Gray	Red
2R2	2.2	± 5, ± 10%	27	7.9	140	0.50	1100	Red	Red	Red
2R7	2.7	± 5, ± 10%	27	7.9	130	0.55	1000	Red	Violet	Red
3R3	3.3	± 5, ± 10%	27	7.9	125	0.60	1000	Orange	Orange	Red
3R9	3.9	± 5, ± 10%	27	7.9	100	0.80	990	Orange	White	Red
4R7	4.7	± 5, ± 10%	30	7.9	90	0.90	880	Yellow	Violet	Red
5R6	5.6	± 5, ± 10%	27	7.9	60	1.00	850	Green	Blue	Red
6R8	6.8	± 5, ± 10%	27	7.9	60	1.05	840	Blue	Gray	Red
8R2	8.2	± 5, ± 10%	25	7.9	55	1.20	810	Gray	Red	Red
100	10	± 5, ± 10%	23	2.5	55	1.55	700	Brown	Black	Orange
120	12	± 5, ± 10%	23	2.5	36	2.10	580	Brown	Red	Orange
150	15	± 5, ± 10%	23	2.5	36	2.38	580	Brown	Green	Orange
180	18	± 5, ± 10%	23	2.5	32	2.50	520	Brown	Gray	Orange
220	22	± 5, ± 10%	23	2.5	29	2.92	500	Red	Red	Orange
270	27	± 10%	23	2.5	22	3.70	450	Red	Violet	Orange
330	33	± 5, ± 10%	23	2.5	21	4.10	420	Orange	Orange	Orange
390	39	± 5, ± 10%	18	2.5	15	5.50	340	Orange	White	Orange
470	47	± 5, ± 10%	23	2.5	17	7.80	310	Yellow	Violet	Orange
680	68	± 5, ± 10%	20	2.5	9	11.5	220	Blue	Gray	Orange
101	100	± 5, ± 10%	13	1	4	13.2	210	Brown	Black	Yellow
151	150	± 5, ± 10%	13	1	3	22.5	170	Brown	Green	Yelloe
221	220	± 5, ± 10%	13	1	3	26.5	160	Red	Red	Yellow
271	270	± 5, ± 10%	13	1	2	32.0	135	Red	Violet	Yellow
331	330	± 5, ± 10%	13	1	2	32.5	130	Orange	Orange	Yellow

NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Large Current Type

Codes	Inductance (uH)	Tolerance	Q min.	Test Freq. (MHz)	SRF (MHz) typ.	DCR (Ω) max.	IDC (mA) max.
1R0	1.0	± 5%,± 20%	10	7.96	145	0.156	770
1R5	1.5	± 5%,± 20%	10	7.96	100	0.195	580
2R2	2.2	± 5%,± 20%	10	7.96	80	0.260	480
3R3	3.3	± 5%,± 20%	10	7.96	60	0.325	400
4R7	4.7	± 5%,± 20%	10	7.96	50	0.520	320
6R8	6.8	± 5%,± 20%	10	7.96	40	0.650	280
100	10	± 5%,± 10%	15	2.52	30	1.105	220
150	15	± 5%,± 10%	15	2.52	27	1.690	180
220	22	± 5%,± 10%	15	2.52	22	2.600	145
270	27	± 5%,± 10%	15	2.52	19	3.000	125
330	33	± 5%,± 10%	15	2.52	17	3.640	115
470	47	± 5%,± 10%	20	2.52	15	5.460	105
680	68	± 5%,± 10%	20	2.52	11	8.450	85
820	82	± 5%,± 10%	20	2.52	10	8.710	80
101	100	± 5%,± 10%	20	0.796	9	10.140	75

NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Large Current Type

Codes	Inductance (uH)	Tolerance	Q min.	Test Freq. (MHz)	SRF (MHz) typ.	DCR (Ω) max.	IDC (mA) max.
1R0	1.0	± 5%,± 10%	10	7.96	265	0.11	1050
1R2	1.2	± 5%,± 10%	10	7.96	180	0.12	1000
1R5	1.5	± 5%,± 10%	10	7.96	170	0.15	950
1R8	1.8	± 5%,± 10%	10	7.96	105	0.16	900
2R2	2.2	± 5%,± 10%	10	7.96	80	0.18	850
2R7	2.7	± 5%,± 10%	10	7.96	60	0.20	800
3R3	3.3	± 5%,± 10%	10	7.96	55	0.22	750
3R9	3.9	± 5%,± 10%	10	7.96	45	0.24	700
4R7	4.7	± 5%,± 10%	10	7.96	43	0.27	650
5R6	5.6	± 5%,± 10%	10	7.96	40	0.30	650
6R8	6.8	± 5%,± 10%	10	7.96	35	0.35	600
8R2	8.2	± 5%,± 10%	10	7.96	30	0.40	600
100	10	± 5%,± 10%	10	2.52	27	0.50	550
120	12	± 5%,± 10%	10	2.52	25	0.60	500
150	15	± 5%,± 10%	10	2.52	20	0.70	450
180	18	± 5%,± 10%	10	2.52	19	0.80	400
220	22	± 5%,± 10%	10	2.52	18	0.90	370
270	27	± 5%,± 10%	10	2.52	16	1.20	330
330	33	± 5%,± 10%	10	2.52	15	1.40	300
390	39	± 5%,± 10%	10	2.52	13	1.60	280
470	47	± 5%,± 10%	10	2.52	12	1.90	260
560	56	± 5%,± 10%	10	2.52	10	2.20	240
680	68	± 5%,± 10%	10	2.52	9.5	2.60	220
820	82	± 5%,± 10%	10	2.52	8.5	3.50	200
101	100	± 5%,± 10%	20	0.796	8.0	4.00	180
121	120	± 5%,± 10%	20	0.796	7.0	4.50	160
151	150	± 5%,± 10%	20	0.796	6.5	6.50	140
181	180	± 5%,± 10%	20	0.796	6.0	7.50	120
221	220	± 5%,± 10%	20	0.796	5.5	9.00	120
271	270	± 5%,± 10%	20	0.796	5.0	11.0	100
331	330	± 5%,± 10%	20	0.796	4.5	13.0	90
391	390	± 5%,± 10%	20	0.796	4.0	14.0	85
471	470	± 5%,± 10%	20	0.796	3.5	16.0	75
561	560	± 5%,± 10%	20	0.796	3.0	21.0	70
681	680	± 5%,± 10%	20	0.796	2.5	24.0	65

NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Large Current Type

Codes	Inductance (uH)	Tolerance	Q min.	Test Freq. (MHz)	SRF (MHz) min.	DCR (Ω) max.	IDC (mA) max.
1R0	1.0	± 10,± 20%	10	7.96	95	0.03	1800
1R2	1.2	± 10, ± 20%	10	7.96	70	0.035	1700
1R5	1.5	± 10, ± 20%	10	7.96	55	0.04	1600
1R8	1.8	± 10, ± 20%	10	7.96	47	0.05	1400
2R2	2.2	± 10, ± 20%	10	7.96	42	0.06	1300
2R7	2.7	± 10, ± 20%	10	7.96	37	0.07	1200
3R3	3.3	± 10, ± 20%	10	7.96	34	0.08	1120
3R9	3.9	± 10, ± 20%	10	7.96	32	0.09	1050
4R7	4.7	± 10, ± 20%	10	7.96	29	0.11	950
5R6	5.6	± 10, ± 20%	10	7.96	26	0.13	880
6R8	6.8	± 10, ± 20%	10	7.96	24	0.15	810
8R2	8.2	± 10, ± 20%	10	7.96	22	0.18	750
100	10	± 10, ± 20%	10	2.52	19	0.21	690
120	12	± 10, ± 20%	10	2.52	17	0.25	630
150	15	± 10, ± 20%	10	2.52	16	0.30	580
180	18	± 10, ± 20%	10	2.52	14	0.36	530
220	22	± 5, ± 10%	10	2.52	13	0.43	480
270	27	± 5, ± 10%	10	2.52	11.5	0.52	440
330	33	± 5, ± 10%	10	2.52	10.5	0.62	400
390	39	± 5, ± 10%	10	2.52	9.5	0.72	370
470	47	± 5, ± 10%	10	2.52	8.5	0.85	340
560	56	± 5, ± 10%	10	2.52	7.8	1.00	310
680	68	± 5, ± 10%	10	2.52	7.0	1.2	290
820	82	± 5, ± 10%	10	2.52	6.4	1.4	270
101	100	± 5, ± 10%	20	0.796	6.0	1.6	250
121	120	± 5, ± 10%	20	0.796	5.4	1.9	230
151	150	± 5, ± 10%	20	0.796	4.8	2.2	210
181	180	± 5, ± 10%	20	0.796	4.4	2.8	190
221	220	± 5, ± 10%	20	0.796	3.9	3.4	170
271	270	± 5, ± 10%	20	0.796	3.6	4.2	155
331	330	± 5, ± 10%	20	0.796	3.2	4.9	140
391	390	± 5, ± 10%	20	0.796	2.9	5.8	130
471	470	± 5, ± 10%	20	0.796	2.6	7.0	120
561	560	± 5, ± 10%	20	0.796	2.4	8.5	110
681	680	± 5, ± 10%	20	0.796	2.2	10	100
821	820	± 5, ± 10%	20	0.796	2.0	13	90
102	1000	± 5, ± 10%	20	0.252	1.8	15	85

Umwelteigenschaften

Electrical Performance Test

Item	Requirement	Test Method
Inductance	Refer to standard electrical characteristic spec.	HP4291 or HP4284
Q		HP4291 or HP4284
SRF		HP4291
DC Resistance DCR		Agilent 34401A
Rated Current IDC		Applied the current to coils, The inductance change should be less than 10% to initial value.

Mechanical Performance Test

Item	Requirement	Test Method
Solderability	The electrodes shall be at least 90% covered with new solder coating	Lead-free inductor: after fluxing (alpha 100 or equiv), inductor shall be dipped in a melted solder bath at 245 ± 5°C, 5 ± 0.5 seconds
Resistance to Soldering Heat	Appearance: No damage	Pre-heating: 150°C, 1min. Solder Temperature: 260 ± 5°C Immersion Time: 10 ± 1 seconds
Vibration	Appearance: No damage L change: within ± 10% Q change: within ± 30% DCR: within specification	Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1 min. Amplitude: 1.5 mm Time: 2 hrs for each axis (X, Y & Z), total 6 hrs

Climatic Test

Item

Requirement

Test Method

Temperature Cycle

Appearance: No damage
L change: within ± 10%
Q change: within ± 30%
DCR: within specification

One cycle:

Step	Temperature (°C)	Time (min.)
1	-25 ± 3	30
2	25 ± 2	3
3	85 ± 3	30
4	25 ± 2	3

Total: 100 cycles
Measured after exposure in the room condition for 24 hrs

Damp Heat with Load

Temperature: 40 ± 2°C
Relative Humidity: 90 ~ 95%
Time: 1000 hrs
Measured after exposure in the room condition for 24 hrs

High Temperature Storage

Temperature: 85 ± 3°C
Applied Current: Rated Current
Time: 1000 hrs
Measured after exposure in the room condition for 24 hrs

Low Temperature Storage

Temperature: -25 ± 3°C
Time: 1000 hrs
Measured after exposure in the room condition for 24 hrs

☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH
☑ Operating Temperature Range: -40 ~ +85°C

Umformen

Ferrite Wire-wound Inductors (NL) - Reflow

Verpackung

Packaging Quantity & Reel Specifications (Unit : mm)

Type	Ø A	Ø B	Ø C	W	T	Quantity (EA)
NL03	178 ± 2.0	60 ± 0.5	13 ± 0.3	9 ± 0.3	12 ± 1.0	4000
NL05	178 ± 2.0	60 ± 0.5	13 ± 0.3	9 ± 0.3	12 ± 1.0	2000
NL08	178 ± 2.0	60 ± 0.5	13 ± 0.3	9 ± 0.3	12 ± 1.0	2000
NL10	178 ± 2.0	60 ± 0.5	13 ± 0.3	9 ± 0.3	12 ± 1.0	2000
NL12	178 ± 2.0	80 ± 0.5	13 ± 0.3	13.2 ± 0.3	16 ± 1.0	500
NL20	330 ± 2.0	100 ± 0.5	13 ± 0.3	17.4 ± 0.3	22 ± 1.0	1000

Embossed Plastic Tape Specifications (Unit : mm)

Embossed Plastic Tape Specifications - NL Series

Type	A	B	C	D	E	F	G	H	J
NL03	8	1.25	4	1.90	3.5	1.75	2	1.00	0.23
NL05	8	1.85	4	2.55	3.5	1.75	2	1.45	0.23
NL08	8	2.80	4	2.95	3.5	1.75	2	2.22	0.23
NL10	8	2.96	4	3.60	3.5	1.75	2	2.40	0.23
NL12	12	3.30	8	5.00	5.5	1.75	2	3.50	0.30
NL20	16	5.35	12	6.10	7.5	1.75	2	5.50	0.35

Leader / Trailer Tape

Cover Tape Peel Strength

The force for tearing off cover tape is 0.1 ~ 0.6 (N) in the arrow direction at the following conditions:

Temperature: 5 ~ 35°C
Humidity: 45 ~ 85%
Atmospheric Pressure: 860 ~ 1060 hpa

Code

Dateien herunterladen

Datenblatt
Drahtgewickelter Chip-Induktor (Ferrit) - NL-Serie

SUCHE

Bedingungssuche: Kreuzsuche

Bester Verkauf

Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JT2R7)Hersteller - Viking

Mit Sitz in Taiwan ist Viking Tech Corporation seit 1997 einer der führenden Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JT2R7) Hersteller.Und ihre Produkte werden in der gesamten Automobil- und Elektronikgeräteindustrie eingesetzt, mit einer Fertigungstoleranz von bis zu 0,01 % und einem TCR von bis zu 2 ppm in einer breiten Palette von Gehäusegrößen.

Mit TS16949/ ISO9001/ ISO14001 und Erfüllung der AEC-Q200-Standards bietet Viking antischwefelhaltige, überspannungsfeste, puls-, hochspannungs- und hochleistungsfähige Präzisionswiderstände, einschließlich Dünn-/Dickfilmwiderstände, Automobilwiderstände, Melf-Widerstände, Strommesswiderstände usw. Niedriges Rauschen, niedriger TC, Hochleistungsinduktoren wie RF-Induktoren, Chip-Induktoren, Leistungsinduktoren, variable Induktoren, Ferrit-Chip-Induktoren, geschirmte Induktoren, Drahtwickelinduktoren und DIP-Induktoren.

Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JT2R7)bietet Kunden seit vielen Jahren hochwertige Leistungswiderstände, Leistungsdrosseln und Aluminium-Elektrolytkondensatoren mit einem soliden Ruf an. Mit fortschrittlicher Technologie und 25 Jahren Erfahrung stellt Viking sicher, dass alle Kundenanforderungen erfüllt werden.