REACH-Erklärung - SVHC(Hsin Chu).pdf
AUTOMOBILANWENDUNGEN
Dünnschicht-Präzisionswiderstand 0,01%, TC2ppm, Drahtbondable, Antikorrosiv, MELF. Stromsensoren, Metall,...
WeiterlesenFerrit-Drahtgewickelte Induktoren (NL-Serie)
0603 / 0805 / 1008 / 1210 / 1812 / 2220
Drahtgewickelte Chip-Ferritinduktoren, hoher Strom, in gegossener und offener Bauform erhältlich. Kleine Größe bis 0603, sehr gute Lötfähigkeit durch Wellenlöten oder Lötkolben, Wellenlöten. Hochbeständig gegen mechanische Stöße und Druck. Hochzuverlässig in Umgebungen mit plötzlichen Temperaturänderungen und Feuchtigkeit. Super Q-Eigenschaften.
Funktionen
- Sehr starke Lötfähigkeit durch Wellenlöten, Lötkolben oder Wellenlöten.
- Hochpräzise Abmessungen, können automatisch montiert werden.
- Die Anschlüsse sind äußerst widerstandsfähig gegen Zugkräfte.
- Sehr widerstandsfähig gegen mechanische Stöße und Druck.
- Hochzuverlässig in Umgebungen mit plötzlichen Temperaturänderungen und Feuchtigkeit, Super-Q-Eigenschaften.
- Feuchtigkeitsempfindlichkeitsstufe 1 (nur NL10(C) / NL12(C))
Anwendungen
- Mikrofernseher, Flüssigkristallfernseher, Videokameras, tragbare Videorekorder, Autoradios, Autoradios, Dünnschichtradios, Fernsehtuner, Mobiltelefone, Radio und andere elektronische Geräte.
Konstruktion
Farbcodierung
0603 / 0805 / 1008 Type (except NL05(L))
Because of small sizes, these parts are marked with a single color dot.
The inductance value represented by the dot is shown on the data page for each type.
Teilenummerierung
Standard Elektrische Spezifikationen
NL03 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| R27 | 0.27 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 950 | Green |
| R47 | 0.47 | ± 10, ± 20% | 13 | 7.9 | 900 | 0.338 | 920 | Blue |
| R68 | 0.68 | ± 10, ± 20% | 13 | 7.9 | 650 | 0.351 | 920 | Violet |
| R78 | 0.78 | ± 10, ± 20% | 16 | 7.9 | 410 | 0.364 | 920 | Gray |
| 1R0 | 1.0 | ± 10, ± 20% | 16 | 7.9 | 390 | 0.416 | 860 | Black |
| 1R5 | 1.5 | ± 10, ± 20% | 16 | 7.9 | 160 | 0.520 | 720 | Brown |
| 1R8 | 1.8 | ± 10, ± 20% | 16 | 7.9 | 121 | 0.559 | 640 | Red |
| 2R2 | 2.2 | ± 10, ± 20% | 16 | 7.9 | 103 | 0.728 | 600 | Orange |
| 2R7 | 2.7 | ± 10, ± 20% | 16 | 7.9 | 72 | 0.806 | 540 | Yellow |
| 3R3 | 3.3 | ± 10, ± 20% | 16 | 7.9 | 66 | 0.910 | 500 | Green |
| 3R9 | 3.9 | ± 10, ± 20% | 16 | 7.9 | 61 | 1.079 | 460 | Blue |
| 4R7 | 4.7 | ± 10, ± 20% | 16 | 7.9 | 51 | 1.261 | 400 | Violet |
| 5R6 | 5.6 | ± 10, ± 20% | 16 | 7.9 | 47 | 1.430 | 380 | Gray |
| 6R8 | 6.8 | ± 10, ± 20% | 16 | 7.9 | 43 | 1.950 | 340 | White |
| 8R2 | 8.2 | ± 10, ± 20% | 16 | 7.9 | 40 | 2.184 | 300 | Black |
| 100 | 10 | ± 10, ± 20% | 14 | 2.5 | 36 | 2.405 | 280 | Brown |
| 120 | 12 | ± 10, ± 20% | 14 | 2.5 | 32 | 2.964 | 260 | Red |
| 150 | 15 | ± 10, ± 20% | 14 | 2.5 | 29 | 3.380 | 240 | Orange |
| 180 | 18 | ± 10, ± 20% | 14 | 2.5 | 28 | 3.770 | 220 | Yellow |
| 220 | 22 | ± 10, ± 20% | 14 | 2.5 | 24 | 4.693 | 200 | Green |
| 270 | 27 | ± 10, ± 20% | 14 | 2.5 | 20 | 6.760 | 140 | Blue |
| 330 | 33 | ± 10, ± 20% | 14 | 2.5 | 15 | 8.580 | 120 | Violet |
| 470 | 47 | ± 10, ± 20% | 12 | 2.5 | 11 | 14.560 | 100 | Gray |
NL05 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q typ. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. | Color Code |
|---|---|---|---|---|---|---|---|---|
| 78N | 0.078 | ± 5, ± 10% | 13 | 7.9 | 1500 | 0.076 | 2000 | Gray |
| R10 | 0.10 | ± 10% | 20 | 25 | 1400 | 0.10 | 1700 | White |
| R11 | 0.11 | ± 10% | 25 | 25 | 1200 | 0.10 | 1700 | White |
| R12 | 0.12 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1500 | Violet |
| R15 | 0.15 | ± 5, ± 10% | 25 | 25 | 1000 | 0.18 | 1400 | Gray |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 1000 | 0.20 | 1400 | Black |
| R22 | 0.22 | ± 5, ± 10% | 30 | 25 | 830 | 0.25 | 1350 | Brown |
| R27 | 0.27 | ± 5, ± 10% | 30 | 25 | 800 | 0.38 | 1300 | Red |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 750 | 0.35 | 1200 | Orange |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 700 | 0.35 | 1160 | Yellow |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 690 | 0.40 | 1100 | Green |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 640 | 0.40 | 1040 | Blue |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 640 | 0.45 | 980 | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 510 | 0.50 | 900 | Violet |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Violet |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 500 | 0.50 | 900 | Gray |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25 | 500 | 0.55 | 900 | Yellow |
| 1R0 | 1.0 | ± 5, ± 10% | 20 | 7.9 | 470 | 0.50 | 840 | White |
| 1R2 | 1.2 | ± 5, ± 10% | 20 | 7.9 | 400 | 0.75 | 800 | Black |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 400 | 1.00 | 720 | Brown |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 230 | 1.00 | 660 | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 200 | 1.05 | 600 | Orange |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.18 | 500 | Yellow |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 160 | 1.26 | 480 | Green |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 130 | 1.75 | 440 | Blue |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 120 | 1.87 | 390 | Violet |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 90 | 2.00 | 340 | Gray |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.15 | 300 | White |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 40 | 2.37 | 280 | Black |
| 100 | 10 | ± 5, ± 10% | 16 | 2.5 | 40 | 2.55 | 260 | Brown |
| 120 | 12 | ± 5, ± 10% | 16 | 2.5 | 37 | 2.80 | 220 | Red |
| 150 | 15 | ± 5, ± 10% | 16 | 2.5 | 30 | 3.80 | 200 | Orange |
| 180 | 18 | ± 5, ± 10% | 16 | 2.5 | 23 | 4.48 | 180 | Yellow |
| 220 | 22 | ± 5, ± 10% | 16 | 2.5 | 20 | 6.30 | 160 | Green |
| 270 | 27 | ± 5, ± 10% | 16 | 2.5 | 19 | 6.85 | 140 | Blue |
| 330 | 33 | ± 5, ± 10% | 16 | 2.5 | 18 | 7.60 | 120 | Violet |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 16 | 8.20 | 100 | Gray |
| 470 | 47 | ± 5, ± 10% | 13 | 2.5 | 13 | 13.10 | 60 | White |
NL08 Wire Wound Chip Inductors (Ferrite / Open Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. | Color Code | ||
|---|---|---|---|---|---|---|---|---|---|---|
| R10 | 0.10 | ± 10% | 25 | 25 | 930 | 0.20 | 1300 | Brown | Black | Brown |
| R12 | 0.12 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Red | Brown |
| R15 | 0.15 | ± 5, ± 10% | 26 | 25 | 930 | 0.30 | 1000 | Brown | Green | Brown |
| R18 | 0.18 | ± 5, ± 10% | 30 | 25 | 930 | 0.30 | 960 | Brown | Gray | Brown |
| R20 | 0.20 | ± 5, ± 10% | 30 | 25 | 735 | 0.30 | 960 | Red | Black | Brown |
| R22 | 0.22 | ± 5, ± 10% | 27 | 25 | 750 | 0.40 | 880 | Red | Red | Brown |
| R27 | 0.27 | ± 5, ± 10% | 29 | 25 | 700 | 0.42 | 900 | Red | Violet | Brown |
| R33 | 0.33 | ± 5, ± 10% | 30 | 25 | 600 | 0.42 | 900 | Orange | Orange | Brown |
| R39 | 0.39 | ± 5, ± 10% | 30 | 25 | 480 | 0.45 | 920 | Orange | White | Brown |
| R47 | 0.47 | ± 5, ± 10% | 30 | 25 | 470 | 0.50 | 920 | Yellow | Violet | Brown |
| R56 | 0.56 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Green | Blue | Brown |
| R62 | 0.62 | ± 5, ± 10% | 30 | 25 | 460 | 0.55 | 900 | Blue | Red | Brown |
| R68 | 0.68 | ± 5, ± 10% | 30 | 25 | 420 | 0.55 | 880 | Blue | Gray | Brown |
| R75 | 0.75 | ± 5, ± 10% | 30 | 25 | 420 | 0.65 | 880 | Violet | Green | Brown |
| R82 | 0.82 | ± 5, ± 10% | 30 | 25 | 380 | 0.65 | 840 | Gray | Red | Brown |
| R91 | 0.91 | ± 5, ± 10% | 30 | 25. | 400 | 0.65 | 840 | White | Brown | Brown |
| 1R0 | 1.0 | ± 5, ± 10% | 25 | 7.9 | 300 | 0.60 | 800 | Brown | Black | Red |
| 1R2 | 1.2 | ± 5, ± 10% | 25 | 7.9 | 280 | 0.74 | 800 | Brown | Red | Red |
| 1R5 | 1.5 | ± 5, ± 10% | 25 | 7.9 | 245 | 0.85 | 780 | Brown | Green | Red |
| 1R8 | 1.8 | ± 5, ± 10% | 25 | 7.9 | 240 | 0.92 | 780 | Brown | Gray | Red |
| 2R2 | 2.2 | ± 5, ± 10% | 25 | 7.9 | 205 | 1.10 | 760 | Red | Red | Red |
| 2R7 | 2.7 | ± 5, ± 10% | 25 | 7.9 | 187 | 1.22 | 760 | Red | Violet | Red |
| 3R3 | 3.3 | ± 5, ± 10% | 25 | 7.9 | 165 | 1.37 | 740 | Orange | Orange | Red |
| 3R9 | 3.9 | ± 5, ± 10% | 25 | 7.9 | 144 | 1.66 | 700 | Orange | White | Red |
| 4R7 | 4.7 | ± 5, ± 10% | 25 | 7.9 | 110 | 1.68 | 660 | Yellow | Violet | Red |
| 5R6 | 5.6 | ± 5, ± 10% | 25 | 7.9 | 88 | 1.75 | 640 | Green | Blue | Red |
| 6R8 | 6.8 | ± 5, ± 10% | 25 | 7.9 | 70 | 1.85 | 640 | Blue | Gray | Red |
| 8R2 | 8.2 | ± 5, ± 10% | 25 | 7.9 | 57 | 2.00 | 600 | Gray | Red | Red |
| 100 | 10 | ± 5, ± 10% | 25 | 7.9 | 55 | 2.32 | 600 | Brown | Black | Orange |
| 120 | 12 | ± 5, ± 10% | 15 | 2.5 | 52 | 2.99 | 560 | Brown | Red | Orange |
| 150 | 15 | ± 5, ± 10% | 15 | 2.5 | 49 | 3.42 | 480 | Brown | Green | Orange |
| 180 | 18 | ± 5, ± 10% | 15 | 2.5 | 48 | 4.65 | 420 | Brown | Gray | Orange |
| 220 | 22 | ± 5, ± 10% | 15 | 2.5 | 25 | 5.12 | 420 | Red | Red | Orange |
| 270 | 27 | ± 5, ± 10% | 15 | 2.5 | 23 | 5.76 | 420 | Red | Violet | Orange |
| 330 | 33 | ± 5, ± 10% | 15 | 2.5 | 17 | 6.44 | 400 | Orange | Orange | Orange |
| 390 | 39 | ± 5, ± 10% | 15 | 2.5 | 15 | 6.85 | 380 | Orange | White | Orange |
| 470 | 47 | ± 5, ± 10% | 14 | 2.5 | 13 | 9.94 | 260 | Yellow | Violet | Orange |
| 560 | 56 | ± 5, ± 10% | 14 | 2.5 | 10 | 10.7 | 280 | Green | Blue | Orange |
| 680 | 68 | ± 5, ± 10% | 14 | 2.5 | 8 | 12.8 | 260 | Blue | Gray | Orange |
| 820 | 82 | ± 5, ± 10% | 14 | 2.5 | 8 | 18.3 | 240 | Gray | Red | Orange |
| 101 | 100 | ± 5, ± 10% | 8 | 1 | 7 | 19.6 | 200 | Brown | Black | Yellow |
NL10 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 30 | 25.2 | 685 | 0.28 | 450 |
| R22 | 0.22 | ± 20% | 30 | 25.2 | 560 | 0.32 | 450 |
| R27 | 0.27 | ± 20% | 30 | 25.2 | 525 | 0.36 | 450 |
| R33 | 0.33 | ± 20% | 30 | 25.2 | 520 | 0.40 | 450 |
| R39 | 0.39 | ± 20% | 30 | 25.2 | 470 | 0.45 | 450 |
| R47 | 0.47 | ± 20% | 30 | 25.2 | 430 | 0.50 | 450 |
| R56 | 0.56 | ± 20% | 30 | 25.2 | 395 | 0.55 | 450 |
| R68 | 0.68 | ± 20% | 30 | 25.2 | 370 | 0.60 | 450 |
| R82 | 0.82 | ± 20% | 30 | 25.2 | 310 | 0.65 | 450 |
| 1R0 | 1.0 | ± 5%,± 10% | 30 | 7.96 | 295 | 0.70 | 400 |
| 1R2 | 1.2 | ± 5%,± 10% | 30 | 7.96 | 255 | 0.75 | 390 |
| 1R5 | 1.5 | ± 5%,± 10% | 30 | 7.96 | 160 | 0.85 | 370 |
| 1R8 | 1.8 | ± 5%,± 10% | 30 | 7.96 | 125 | 0.90 | 350 |
| 2R2 | 2.2 | ± 5%,± 10% | 30 | 7.96 | 100 | 1.00 | 320 |
| 2R7 | 2.7 | ± 5%,± 10% | 30 | 7.96 | 65 | 1.10 | 290 |
| 3R3 | 3.3 | ± 5%,± 10% | 30 | 7.96 | 55 | 1.20 | 260 |
| 3R9 | 3.9 | ± 5%,± 10% | 30 | 7.96 | 50 | 1.30 | 250 |
| 4R7 | 4.7 | ± 5%,± 10% | 30 | 7.96 | 45 | 1.50 | 220 |
| 5R6 | 5.6 | ± 5%,± 10% | 30 | 7.96 | 40 | 1.60 | 200 |
| 6R8 | 6.8 | ± 5%,± 10% | 30 | 7.96 | 35 | 1.80 | 180 |
| 8R2 | 8.2 | ± 5%,± 10% | 30 | 7.96 | 30 | 2.00 | 170 |
| 100 | 10 | ± 5%,± 10% | 30 | 2.52 | 30 | 2.10 | 150 |
| 120 | 12 | ± 5%,± 10% | 30 | 2.52 | 28 | 2.50 | 140 |
| 150 | 15 | ± 5%,± 10% | 30 | 2.52 | 25 | 2.80 | 130 |
| 180 | 18 | ± 5%,± 10% | 30 | 2.52 | 22 | 3.30 | 120 |
| 220 | 22 | ± 5%,± 10% | 30 | 2.52 | 19 | 3.70 | 110 |
| 270 | 27 | ± 5%,± 10% | 30 | 2.52 | 18 | 5.00 | 80 |
| 330 | 33 | ± 5%,± 10% | 30 | 2.52 | 17 | 5.60 | 70 |
| 390 | 39 | ± 5%,± 10% | 30 | 2.52 | 15 | 6.40 | 65 |
| 470 | 47 | ± 5%,± 10% | 30 | 2.52 | 14 | 7.00 | 60 |
| 560 | 56 | ± 5%,± 10% | 30 | 2.52 | 13 | 8.00 | 55 |
| 680 | 68 | ± 5%,± 10% | 30 | 2.52 | 11 | 9.00 | 50 |
| 820 | 82 | ± 5%,± 10% | 30 | 2.52 | 10 | 10.00 | 45 |
| 101 | 100 | ± 5%,± 10% | 20 | 0.796 | 9 | 11.00 | 40 |
| 121 | 120 | ± 5%,± 10% | 20 | 0.796 | 8 | 11.00 | 70 |
| 151 | 150 | ± 5%,± 10% | 20 | 0.796 | 7 | 15.00 | 65 |
NL12 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) typ. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| R18 | 0.18 | ± 20% | 35 | 25.2 | 570.0 | 0.24 | 700 |
| R22 | 0.22 | ± 20% | 40 | 25.2 | 505.0 | 0.25 | 665 |
| R27 | 0.27 | ± 20% | 40 | 25.2 | 450.0 | 0.26 | 635 |
| R33 | 0.33 | ± 20% | 40 | 25.2 | 425.0 | 0.28 | 605 |
| R39 | 0.39 | ± 20% | 40 | 25.2 | 390.0 | 0.30 | 575 |
| R47 | 0.47 | ± 20% | 40 | 25.2 | 350.0 | 0.32 | 545 |
| R56 | 0.56 | ± 20% | 40 | 25.2 | 325.0 | 0.36 | 520 |
| R68 | 0.68 | ± 20% | 40 | 25.2 | 300.0 | 0.40 | 500 |
| R82 | 0.82 | ± 20% | 40 | 25.2 | 275.0 | 0.45 | 475 |
| 1R0 | 1.0 | ± 5%,± 10% | 50 | 7.96 | 250.0 | 0.50 | 450 |
| 1R2 | 1.2 | ± 5%,± 10% | 50 | 7.96 | 240.0 | 0.55 | 430 |
| 1R5 | 1.5 | ± 5%,± 10% | 50 | 7.96 | 210.0 | 0.60 | 410 |
| 1R8 | 1.8 | ± 5%,± 10% | 50 | 7.96 | 190.0 | 0.65 | 390 |
| 2R2 | 2.2 | ± 5%,± 10% | 50 | 7.96 | 160.0 | 0.70 | 380 |
| 2R7 | 2.7 | ± 5%,± 10% | 50 | 7.96 | 150.0 | 0.75 | 370 |
| 3R3 | 3.3 | ± 5%,± 10% | 50 | 7.96 | 110.0 | 0.80 | 355 |
| 3R9 | 3.9 | ± 5%,± 10% | 50 | 7.96 | 100.0 | 0.90 | 330 |
| 4R7 | 4.7 | ± 5%,± 10% | 50 | 7.96 | 80.0 | 1.00 | 315 |
| 5R6 | 5.6 | ± 5%,± 10% | 50 | 7.96 | 50.0 | 1.10 | 300 |
| 6R8 | 6.8 | ± 5%,± 10% | 50 | 7.96 | 35.0 | 1.20 | 285 |
| 8R2 | 8.2 | ± 5%,± 10% | 50 | 7.96 | 28.0 | 1.40 | 270 |
| 100 | 10 | ± 5%,± 10% | 50 | 2.52 | 22.0 | 1.60 | 250 |
| 120 | 12 | ± 5%,± 10% | 50 | 2.52 | 20.0 | 2.00 | 225 |
| 150 | 15 | ± 5%,± 10% | 50 | 2.52 | 18.0 | 2.50 | 200 |
| 180 | 18 | ± 5%,± 10% | 50 | 2.52 | 16.0 | 2.80 | 190 |
| 220 | 22 | ± 5%,± 10% | 50 | 2.52 | 14.0 | 3.20 | 180 |
| 270 | 27 | ± 5%,± 10% | 50 | 2.52 | 13.0 | 3.60 | 170 |
| 330 | 33 | ± 5%,± 10% | 50 | 2.52 | 12.0 | 4.00 | 160 |
| 390 | 39 | ± 5%,± 10% | 50 | 2.52 | 11.0 | 4.50 | 150 |
| 470 | 47 | ± 5%,± 10% | 50 | 2.52 | 10.5 | 5.00 | 140 |
| 560 | 56 | ± 5%,± 10% | 50 | 2.52 | 10.0 | 5.50 | 135 |
| 680 | 68 | ± 5%,± 10% | 50 | 2.52 | 9.5 | 6.00 | 130 |
| 820 | 82 | ± 5%,± 10% | 50 | 2.52 | 8.5 | 7.00 | 120 |
| 101 | 100 | ± 5%,± 10% | 40 | 0.796 | 8.0 | 8.00 | 110 |
| 121 | 120 | ± 5%,± 10% | 40 | 0.796 | 7.0 | 8.00 | 110 |
| 151 | 150 | ± 5%,± 10% | 40 | 0.796 | 6.0 | 9.00 | 105 |
| 181 | 180 | ± 5%,± 10% | 40 | 0.796 | 5.5 | 9.50 | 102 |
| 221 | 220 | ± 5%,± 10% | 40 | 0.796 | 5.0 | 10.0 | 100 |
| 271 | 270 | ± 5%,± 10% | 40 | 0.796 | 4.5 | 12.0 | 92 |
| 331 | 330 | ± 5%,± 10% | 40 | 0.796 | 4.0 | 14.0 | 85 |
| 391 | 390 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 18.0 | 80 |
| 471 | 470 | ± 5%,± 10% | 40 | 0.796 | 3.5 | 26.0 | 62 |
| 561 | 560 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 681 | 680 | ± 5%,± 10% | 30 | 0.796 | 3.0 | 30.0 | 50 |
| 821 | 820 | ± 5%,± 10% | 30 | 0.796 | 2.5 | 35.0 | 30 |
NL20 Wire Wound Chip Inductors (Ferrite / Molding Type) / Standard Type
| Codes | Inductance (uH) | Tolerance | Q min. | Test Freq. (MHz) | SRF (MHz) min. | DCR (Ω) max. | IDC (mA) max. |
|---|---|---|---|---|---|---|---|
| 122 | 1.2 | ± 5, ± 10% | 20 | 0.252 | 1.5 | 17 | 75 |
| 152 | 1.5 | ± 5, ± 10% | 20 | 0.252 | 1.4 | 20 | 70 |
| 182 | 1.8 | ± 5, ± 10% | 20 | 0.252 | 1.3 | 30 | 60 |
| 222 | 2.2 | ± 5, ± 10% | 20 | 0.252 | 1.2 | 35 | 55 |
| 272 | 2.7 | ± 5, ± 10% | 20 | 0.252 | 1.1 | 55 | 45 |
| 332 | 3.3 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 60 | 40 |
| 392 | 3.9 | ± 5, ± 10% | 20 | 0.252 | 1.0 | 70 | 38 |
| 472 | 4.7 | ± 5, ± 10% | 20 | 0.252 | 0.9 | 78 | 36 |
| 562 | 5.6 | ± 5, ± 10% | 20 | 0.252 | 0.8 | 85 | 33 |
| 682 | 6.8 | ± 5, ± 10% | 20 | 0.252 | 0.7 | 110 | 30 |
| 822 | 8.2 | ± 5, ± 10% | 20 | 0.252 | 0.6 | 125 | 28 |
| 103 | 10 | ± 5, ± 10% | 15 | 0.0796 | 0.5 | 150 | 25 |
- Dateien herunterladen
-
- RoHS-Bericht
-
-
- REACH
| Image | Größe | Toleranz | Induktivität | Testbedingungen | DCR (Ω) max. | IDC (A) | Q | SRF | Dateien herunterladen | Aktion |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JTC180) 
|
0805 |
±5% |
18 |
2.52MHz |
2.01 |
280 |
15 |
27 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JTC220)
|
0805 |
±5% |
22 |
2.52MHz |
2.28 |
240 |
15 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JTC270)
|
0805 |
±5% |
27 |
2.52MHz |
2.6 |
220 |
15 |
17 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JTC330)
|
0805 |
±5% |
33 |
2.52MHz |
3.05 |
200 |
15 |
17 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JTC470)
|
0805 |
±5% |
47 |
2.52MHz |
4.42 |
160 |
14 |
15 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JTC560)
|
0805 |
±5% |
56 |
2.52MHz |
5.74 |
150 |
14 |
10 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JTC680)
|
0805 |
±5% |
68 |
2.52MHz |
5.78 |
140 |
14 |
10 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JTC820)
|
0805 |
±5% |
82 |
2.52MHz |
9.75 |
100 |
14 |
10 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL05JTC101)
|
0805 |
±5% |
100 |
1MHz |
9.75 |
100 |
10 |
9 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTCR22)
|
1008 |
±5% |
0.22 |
25.2MHz |
0.15 |
2600 |
35 |
800 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTCR47)
|
1008 |
±5% |
0.47 |
25.2MHz |
0.2 |
2400 |
35 |
460 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTCR68)
|
1008 |
±5% |
0.68 |
25.2MHz |
0.3 |
2200 |
35 |
400 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTCR82)
|
1008 |
±5% |
0.82 |
25.2MHz |
0.35 |
1800 |
35 |
360 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC1R0)
|
1008 |
±5% |
1 |
7.96MHz |
0.35 |
800 |
22 |
245 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC1R2)
|
1008 |
±5% |
1.2 |
7.96MHz |
0.4 |
550 |
25 |
230 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC1R5)
|
1008 |
±5% |
1.5 |
7.96MHz |
0.45 |
550 |
25 |
182 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC1R8)
|
1008 |
±5% |
1.8 |
7.96MHz |
0.55 |
550 |
25 |
135 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC2R2)
|
1008 |
±5% |
2.2 |
7.96MHz |
0.6 |
500 |
22 |
105 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC2R7)
|
1008 |
±5% |
2.7 |
7.96MHz |
0.7 |
500 |
25 |
70 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC3R3)
|
1008 |
±5% |
3.3 |
7.96MHz |
0.75 |
450 |
22 |
55 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC3R9)
|
1008 |
±5% |
3.9 |
7.96MHz |
0.8 |
450 |
25 |
50 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC4R7)
|
1008 |
±5% |
4.7 |
7.96MHz |
0.9 |
400 |
22 |
45 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC5R6)
|
1008 |
±5% |
5.6 |
7.96MHz |
1.05 |
400 |
22 |
42 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC6R8)
|
1008 |
±5% |
6.8 |
7.96MHz |
1.05 |
400 |
22 |
40 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC8R2)
|
1008 |
±5% |
8.2 |
7.96MHz |
1.3 |
350 |
22 |
36 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC100)
|
1008 |
±5% |
10 |
2.52MHz |
1.55 |
300 |
20 |
35 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC120)
|
1008 |
±5% |
12 |
2.52MHz |
2.1 |
280 |
20 |
30 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC150)
|
1008 |
±5% |
15 |
2.52MHz |
2.38 |
250 |
20 |
24 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC180)
|
1008 |
±5% |
18 |
2.52MHz |
2.6 |
200 |
20 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC220)
|
1008 |
±5% |
22 |
2.52MHz |
2.92 |
200 |
20 |
18 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC330)
|
1008 |
±5% |
33 |
2.52MHz |
4.1 |
180 |
20 |
16 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC470)
|
1008 |
±5% |
47 |
2.52MHz |
7.8 |
350 |
23 |
17 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC101)
|
1008 |
±5% |
100 |
1MHz |
13.2 |
200 |
13 |
4 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC221)
|
1008 |
±5% |
220 |
1MHz |
26.5 |
140 |
13 |
3 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL08JTC331)
|
1008 |
±5% |
330 |
1MHz |
32.5 |
110 |
13 |
2 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10MTC1R0)
|
1210 |
±20% |
1 |
7.96MHz |
0.156 |
770 |
10 |
100 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10MTC1R5)
|
1210 |
±20% |
1.5 |
7.96MHz |
0.195 |
580 |
10 |
80 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10MTC2R2)
|
1210 |
±20% |
2.2 |
7.96MHz |
0.26 |
480 |
10 |
65 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10MTC3R3)
|
1210 |
±20% |
3.3 |
7.96MHz |
0.325 |
400 |
10 |
55 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10MTC4R7)
|
1210 |
±20% |
4.7 |
7.96MHz |
0.52 |
320 |
10 |
45 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10MTC6R8)
|
1210 |
±20% |
6.8 |
7.96MHz |
0.65 |
280 |
10 |
35 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10KTC100)
|
1210 |
±10% |
10 |
2.52MHz |
1.105 |
220 |
15 |
28 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10KTC150)
|
1210 |
±10% |
15 |
2.52MHz |
1.69 |
180 |
15 |
25 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10KTC220)
|
1210 |
±10% |
22 |
2.52MHz |
2.6 |
145 |
15 |
20 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10KTC270)
|
1210 |
±10% |
27 |
2.52MHz |
3 |
125 |
15 |
17 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10KTC330)
|
1210 |
±10% |
33 |
2.52MHz |
3.64 |
115 |
15 |
15 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10KTC470)
|
1210 |
±10% |
47 |
2.52MHz |
5.46 |
105 |
20 |
13 |
|
Zur Liste hinzufügen |
Drahtgewickelter Chip-Induktor (Ferrit) (NL-Serie NL10KTC680)
|
1210 |
±10% |
68 |
2.52MHz |
8.45 |
85 |
20 |
10 |
|
Zur Liste hinzufügen |
|---|
Anwendung
MEDIZINISCHE ANWENDUNGEN
Keramische Hochfrequenz-Chip-Induktoren, klein bis 01005. Dünnschicht-, Mehrschicht-, Drahtgewickelte-,...
Weiterlesen
KOMMUNIKATIONSANWENDUNGEN
Mehrschicht-Keramikkondensator bietet hohe Spannung, hohe Frequenz, geringes Rauschen, hohe Güte, niedrige...
Weiterlesen