![APLICAÇÕES AUTOMOTIVAS](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
APLICAÇÕES AUTOMOTIVAS
Resistor de precisão de filme fino 0,01%, TC2ppm, wirebondale, anti-corrosivo, MELF. Detecção de corrente,...
consulte Mais informaçãoResistor de Chip de Precisão de Filme Fino de Nitreto de Alumínio - Série ARN
ARN Series0603 ±0.1% 25 1/2W Series390Ω 5K/Reel
Tamanho | Tolerância | TCR (ppm /℃) | Potência | Resistência (Ohm) | Pacote |
---|---|---|---|---|---|
0603 | ±0.1% | 25 | 1/2W | 390 | 5K/Reel |
Item | Requirement | Test Method |
---|---|---|
Temperature Coefficient of Resistance (T.C.R.) | As Spec. | MIL-STD-202 Method 304 +25/-55/+25/+125/+25°C |
Short Time Overload(2) | ΔR±0.5% | Actual power handling capability is limited by the end user mounting process. As with any high power chip resistor the ability to remove the heat is critical to the overall performance of the device |
Insulation Resistance | >9999 MΩ | MIL-STD-202 Method 302 Apply 100VDC for 1 minute |
Endurance | ΔR±1% | MIL-STD-202 Method 108A 70±2°C, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” |
Damp Heat with Load | ΔR±0.4% | MIL-STD-202 Method 103B 40±2°C, 90~95% R.H. RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” |
Solderability | 95% min. coverage | MIL-STD-202 Method 208H 245±5°C for 3 seconds |
Resistance to Soldering Heat | ΔR±0.2% | MIL-STD-202 Method 210E 260±5°C for 10 seconds |
Thermal Shock | ΔR±0.2% | MIL-STD-202 Method 107G -55°C ~155°C, 100 cycles |
Low Temperature Operation | ΔR±0.2% | JIS-C-5201-1 4.36 1 hour, -65°C, followed by 45 minutes of RCWV |
High Temperature Exposure | ΔR±0.2% | MIL-STD-202 Method 108 at 155°C for 1000 hrs |
RCWV(Rated continuous working voltage)= √(P*R) or Max. Operating voltage whichever is lower
☑ Storage Temperature: 15~28°C; Humidity < 80%RH
1206 / 2512: 4 digits marking
Example:
Resistance | 500Ω | 2.2KΩ | 10KΩ | 12.5KΩ |
---|---|---|---|---|
Marking | 5000 | 2201 | 1002 | 1252 |
Packing Quantity & Reel Specifications (Unit :mm)
Type | ØA | ØB | ØC | W | T | Paper Type(EA) | Emboss Plastic Tape(EA) | ![]() |
---|---|---|---|---|---|---|---|---|
ARN06 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - | |
ARN12 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 13.5±1.0 | 15.5±1.0 | - | 4,000 |
Paper Tape Specifications
Type | A | B | W | E | F | P0 | P1 | P2 | ΦD0 | T |
---|---|---|---|---|---|---|---|---|---|---|
ARN06 | 2.00±0.05 | 3.55±0.05 | 8.00±0.10 | 1.75±0.05 | 3.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.55±0.05 | 0.75±0.05 |
☑ Peel force of top cover tape
☑ The peel speed shall be about 300mm/min±5%
☑ The peel force of top cover tape shall be between 8gf to 60gf
Emboss Plastic Tape Specifications (Unit: mm)
Type | A | B | W | E | F | P0 | P1 | P2 | ØD0 | T |
---|---|---|---|---|---|---|---|---|---|---|
ARN12 | 3.40±0.10 | 6.65±0.10 | 12.0±0.10 | 1.75±0.10 | 5.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.50±0.10 | 1.00±0.20 |
☑ Peel force of top cover tape
☑ The peel speed shall be about 300mm/min±5%
☑ The peel force of top cover tape shall be between 20gf to 80gf
Resistor de precisão de filme fino 0,01%, TC2ppm, wirebondale, anti-corrosivo, MELF. Detecção de corrente,...
consulte Mais informaçãoIndutores de chip cerâmico de alta frequência, tamanho pequeno até 01005. Indutor de filme fino, multicamada,...
consulte Mais informaçãoO capacitor cerâmico multicamada oferece alta tensão, alta frequência, baixo ruído, alta Q, baixo...
consulte Mais informação