![AUTOMOBIEL TOEPASSINGEN](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
AUTOMOBIEL TOEPASSINGEN
Dunne film precisieweerstand 0,01%, TC2ppm, wirebondable, anti-corrosief, MELF. Stroomdetectie, metaal,...
Lees verderAfgeschermde SMD kleine, miniatuur vermogensinductor, nieuw ontworpen terminatie voor lage kosten, laag profiel en hoge stroom, magnetisch afgeschermde constructie. Ideaal voor digitale apparatuur en handsets.
SCDS Series3D18 ±30% 27μH 0.557 Ω 0.38A
Grootte | Tolerantie | Inductie | Testconditie | DCR (Ω) max. | IDC (A) |
---|---|---|---|---|---|
3D18 | ±30% | 27 | 100KHz, 0.1V | 0.557 | 0.38 |
Type | Tape size | Parts Per Reel | ||
---|---|---|---|---|
W | P | 7" | 13" | |
SCDS3D18 | 12 | 8 | 1000 | - |
SCDS4D18 | 12 | 8 | - | 2000 |
SCDS4D28 | 12 | 8 | - | 2000 |
SCDS5D18 | 12 | 8 | - | 2000 |
SCDS5D28 | 12 | 8 | - | 2000 |
SCDS6D28 | 16 | 12 | - | 1500 |
SCDS6D38 | 16 | 12 | - | 1000 |
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: <80% relative humidity. Recommended product should be used within one year from the time of delivery. |
Environmental Test
Test Items | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -25 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Test Items | Specification | Test Conditions / Test Methods |
---|---|---|
Solder Ability Test | Terminal area must have 90% minimum solder coverage. | Dip pads in flux then dip in solder pot (SnCuNi) at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
The Condition Of Reflow (Recommendation):
Dunne film precisieweerstand 0,01%, TC2ppm, wirebondable, anti-corrosief, MELF. Stroomdetectie, metaal,...
Lees verderKeramische hoogfrequente chipinductoren, klein formaat tot 01005. Dunne film, multilayer, draadgewonden,...
Lees verderMultilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder