![AUTOMOBIEL TOEPASSINGEN](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
AUTOMOBIEL TOEPASSINGEN
Dunne film precisieweerstand 0,01%, TC2ppm, wirebondable, anti-corrosief, MELF. Stroomdetectie, metaal,...
Lees verderAfgeschermde SMD-voedingsspoel, compact, laag profiel met lage DCR en grote stroom, magnetisch afgeschermd tegen straling.
PCS Series129 ±20% 22μH 0.039 Ω 5A
Grootte | Tolerantie | Inductie | DCR (Ω) max. | IDC (A) |
---|---|---|---|---|
129 | ±20% | 22 | 0.039 | 5 |
PCSH127 Type(□:Tolerance)
Part No. | L (μH) | Tolerance | Test Condition | DCR (Ω) Max | IDC (A) Max |
---|---|---|---|---|---|
PCSH127□T2R2 | 2.2 | N | 100KHz, 0.25V | 0.007 | 25.5 |
PCSH127□T4R7 | 4.7 | N | 100KHz, 0.25V | 0.016 | 15.9 |
PCSH127□T5R6 | 5.6 | N | 100KHz, 0.25V | 0.020 | 14.0 |
PCSH127□T6R8 | 6.8 | N | 100KHz, 0.25V | 0.021 | 13.3 |
PCSH127□T8R2 | 8.2 | N | 100KHz, 0.25V | 0.023 | 12.2 |
PCSH127□T100 | 10 | M | 100KHz, 0.25V | 0.024 | 11.2 |
PCSH127□T150 | 15 | M | 100KHz, 0.25V | 0.031 | 9.00 |
PCSH127□T180 | 18 | M | 100KHz, 0.25V | 0.035 | 7.70 |
PCSH127□T220 | 22 | M | 100KHz, 0.25V | 0.040 | 7.57 |
PCSH127□T330 | 33 | M | 100KHz, 0.25V | 0.070 | 6.22 |
PCSH127□T390 | 39 | M | 100KHz, 0.25V | 0.075 | 5.40 |
PCSH127□T470 | 47 | M | 100KHz, 0.25V | 0.080 | 5.28 |
PCSH127□T560 | 56 | M | 100KHz, 0.25V | 0.130 | 4.50 |
PCSH127□T680 | 68 | M | 100KHz, 0.25V | 0.105 | 4.26 |
PCSH127□T820 | 82 | M | 100KHz, 0.25V | 0.143 | 3.80 |
PCSH127□T101 | 100 | M | 100KHz, 0.25V | 0.163 | 3.52 |
PCSH127□T121 | 120 | M | 100KHz, 0.25V | 0.170 | 3.20 |
PCSH127□T151 | 150 | M | 100KHz, 0.25V | 0.247 | 3.01 |
PCSH127□T221 | 220 | M | 100KHz, 0.25V | 0.376 | 2.36 |
PCSH127□T331 | 330 | M | 100KHz, 0.25V | 0.574 | 2.00 |
PCSH127□T391 | 390 | M | 100KHz, 0.25V | 0.650 | 1.50 |
PCSH127□T471 | 470 | M | 100KHz, 0.25V | 0.861 | 1.64 |
PCSH127□T681 | 680 | M | 100KHz, 0.25V | 1.080 | 1.38 |
PCSH127□T821 | 820 | M | 100KHz, 0.25V | 1.470 | 1.26 |
PCSH127□T102 | 1000 | M | 100KHz, 0.25V | 1.660 | 1.14 |
■Viking is capable to design according to customer special requirement
Type | Tape Size | Parts Per Reel | |
---|---|---|---|
W | P | 13" | |
PCS62B | 16 | 12 | 1500 |
PCS64B | 16 | 12 | 1000 |
PCS73 | 16 | 12 | 1000 |
PCS74 | 16 | 12 | 1000 |
PCS124 | 24 | 16 | 500 |
PCS125 | 24 | 16 | 400 |
PCS127 | 24 | 16 | 400 |
PCS129 | 24 | 16 | 300 |
PCSH127 | 24 | 16 | 500 |
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: <80% relative humidity. Recommended product should be used within one year from the time of delivery. |
Environmental Test
Test Items | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -25 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Test Items | Specification | Test Conditions / Test Methods |
---|---|---|
Solder Ability Test | Terminal area must have 90% minimum solder coverage. | Dip pads in flux then dip in solder pot (SnCuNi) at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
The Condition Of Reflow (Recommendation):
Dunne film precisieweerstand 0,01%, TC2ppm, wirebondable, anti-corrosief, MELF. Stroomdetectie, metaal,...
Lees verderKeramische hoogfrequente chipinductoren, klein formaat tot 01005. Dunne film, multilayer, draadgewonden,...
Lees verderMultilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder