AUTOMOBIEL TOEPASSINGEN
Dunne film precisieweerstand 0,01%, TC2ppm, wirebondable, anti-corrosief, MELF. Stroomdetectie, metaal,...
Lees verderAfgeschermde SMD-voedingsspoel, compact, laag profiel met lage DCR en grote stroom, magnetisch afgeschermd tegen straling.
PCDR Series1045 ±20% 1500μH 3.4 Ω 0.22A
Grootte | Tolerantie | Inductie | Testconditie | DCR (Ω) max. | IDC (A) |
---|---|---|---|---|---|
1045 | ±20% | 1500 | 1KHz, 0.5V | 3.4 | 0.22 |
Type | Tape Size | Parts Per Reel | |
---|---|---|---|
W | P | 13" | |
PCDR0628 | 16 | 12 | 1000 |
PCDR0728 | 16 | 12 | 1000 |
PCDR0730 | 16 | 12 | 1000 |
PCDR0732 | 16 | 12 | 1000 |
PCDR0745 | 16 | 12 | 1000 |
PCDR1045 | 24 | 16 | 750 |
PCDR1255 | 24 | 16 | 500 |
PCDR1265 | 24 | 16 | 500 |
PCDR1275 | 24 | 16 | 350 |
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: < 80% relative humidity. Recommended product should be used within 12 months from the time of delivery. |
Environmental Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -40 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
Solderability test | Terminal area must have 90% minimum solder coverage. | Product with Lead-free terminal: Dip pads in flux then dip in solder pot at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
The Condition Of Reflow (Recommendation):
Dunne film precisieweerstand 0,01%, TC2ppm, wirebondable, anti-corrosief, MELF. Stroomdetectie, metaal,...
Lees verderKeramische hoogfrequente chipinductoren, klein formaat tot 01005. Dunne film, multilayer, draadgewonden,...
Lees verderMultilayer keramische condensator biedt hoge spanning, hoge frequentie, lage ruis, hoge Q, lage TCR....
Lees verder