TO-220 전력 저항기 (TR50-H 시리즈 TR50JB-R110H)
TR50JB-R110H
두꺼운 필름으로 포장된 TO220을 사용한 고출력 저항기입니다. 스위칭 전원 공급 및 스너버 회로, 자동화 기계 컨트롤러, RF 전력 증폭기, 저에너지 펄스 부하, UPS, 전압 조절, 블리더 저항기에 적용됩니다.
TR50-H Series±5% 50W Series110MΩ TO220
허용오차 | 전력 | 저항 (옴) | 패키지 |
---|---|---|---|
±5% | 50W | 110M | TO220 |
전기적 특성 사양
Item Type |
Resistance Range | TCR (PPM/°C) | |||
---|---|---|---|---|---|
±0.5% | ±1% | ±5% | ±10% | ||
TR50 | - | - | 0.05Ω - 0.1Ω | No Specified | |
- | ≧0.1Ω - 1Ω | No Specified | |||
- | ≧1Ω - 5Ω | ±100 ±200 ±300 |
|||
≧10Ω - 100KΩ | ±50 ±100 ±200 |
||||
≧5Ω - 10Ω | ±100 ±200 ±300 |
☑ Operating Voltage: 350V Max.
☑ Dielectric Strength: 1800VAC
☑ Insulation Resistance: 10GΩ min.
☑ Working Temperature Range: -65°C to +150°C
환경 특성
Item | Requirement | Test Method |
---|---|---|
Temperature Coefficient of Resistance (T.C.R.) |
As Spec. | Referenced to 25°C, DR taken at +105°C |
Short Time Overload | DR±0.3% | 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds |
Load Life | DR±1.0% | 2,000 hours at rated power |
Damp Heat with Load | DR±0.5% | 40±2°C, 90~95% R.H., RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF” |
Solderability | 90% min. coverage | 245±5°C for 3 seconds |
Thermal Shock | DR±0.3% | -65°C ~150°C, 100 cycles |
Terminal Strength | DR±0.2% | (Pull Test) 2.4N |
Vibration, High Frequency | DR±0.2% | 20g peak |
- Lead Material: Tinned Copper
- Maximum Torque: 0.9 N-m
- Without a Heat Sink, When in Free Air at 25°C, the TR50-H is Rated for 2.25W.
- The Case Temperature is to be used for the Definition of the Applied Power Limit.
- The Case Temperature Measurement Must be Made with a Thermocouple Contacting the Center of the Component Mounted on the Designed Heat Sink.
- Thermal Grease Should be Applied Properly. RCWV(Rated continuous working voltage)= √(P*R) or Max. Operating voltage whichever is lower
코드
- R110
- 파일 다운로드
-
-