![자동차 응용 분야](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
탄탈륨 질화물 박막 정밀 칩 저항기 (TAR 시리즈 TAR06FTDU3000)
TAR06FTDU3000
탄탈룸 질화물 박막 정밀 칩 저항기 - TAR 시리즈
TAR Series1206 ±1% 50 1/2W Series300Ω 5K/Reel
크기 | 허용 오차 | TCR (ppm /℃) | 전력 | 저항 (옴) | 패키지 |
---|---|---|---|---|---|
1206 | ±1% | 50 | 1/2W | 300 | 5K/Reel |
환경 특성
Item | Requirement | Test Method |
---|---|---|
Temperature Coefficient of Resistance (T.C.R.) | As Spec. | JIS-C-5201-1 4.8 IEC-60115-1 4.8 -55°C ~ + 125°C, 25°C is the reference temperature |
Short Time Overload | ΔR±0.1% | JIS-C-5201-1 4.13 RCWV x 2.5 or Max. Overload Voltage whichever is lower for 5 seconds |
Insulation Resistance | >1000 MΩ | JIS-C-5201-1 4.6 IEC-60115-1 4.6 Max. Apply 100VDC for 1 minute |
Operational Life | ΔR±0.1% | MIL-STD-202 Method 108 Condition D Steady State TA=125°C at derated power. Measurement at 24±4 hours after test conclusion. |
Biased Humidity | ΔR±0.1% | MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power. |
High Temperature Exposure | ΔR±0.15% | MIL-STD-202 Method 108 at + 155°C for 1000 hrs |
Board Flex | ΔR±0.1% | JIS-C5201-1 4.23 Bending 2mm for 60 seconds |
Solderability | 95% min. coverage | JIS-C-5201-1 4.17 IEC-60115-1 4.17 245 ± 5°C for 3 seconds |
Resistance to Soldering Heat | ΔR±0.1% | JIS-C-5201-1 4.18 IEC-60115-1 4.18 260 ± 5°C for 10 seconds |
Endurance | ΔR±0.1% | IEC-60115-1 4.25 1000 +48/-0 hours, loaded with RCWV or Vmax in chamber controller 85± 2°C, 1.5 hours on and 0.5 hours off |
Moisture Resistance | ΔR±0.1% | MIL-STD-202 Method 106 65 ± 2°C, 80~100%RH, 10 CYCLES, 24 hours/cycle |
Temperature Cycling | ΔR±0.1% for 125°C | JESD22 Method JA-104 -55°C to + 125°C, 1000 cycles -55°C to + 155°C, 1000 cycles |
ΔR±0.2% for 155°C | ||
Mechanical Shock | ΔR±0.1% | MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. |
Vibration | ΔR±0.1% | MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz |
ESD | ΔR±0.1% | AEC-Q200-002 Human body model TAR02, TAR03: 0.2KV TAR05, TAR06: 1KV |
Resistance to Solvents | Marking unsmeared | MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. |
Terminal Strength | No broken | AEC-Q200-006 Force of 1kg for 60 seconds. |
Flammability | No ignition of the tissue paper or scorching or the pinewood board | UL-94 V-0 or V-1 are acceptable. Electrical test not required. |
Sulfur Test | ΔR±1% | EIA-977(Conditions B) 105 ± 2°C, no power rating for 750 hrs |
RCWV (Rated Continuous Working Voltage)=√(P x R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH
납땜 조건
![IR Reflow Soldering / Wave Soldering (Flow Soldering)](/Templates/pic/IMG-TAR-Soldering_Condition.jpg)
(1) Time of IR reflow soldering at maximum temperature point 260°C:10s
(2) Time of wave soldering at maximum temperature point 260°C:10s
(3) Time of soldering iron at maximum temperature point 410°C:5s
마킹
![0603 3digit marking](/Templates/pic/IMG-Marking-TAR-01.jpg)
Marking Table
Code | E96 | Code | E96 | Code | E96 | Code | E96 | ||||
---|---|---|---|---|---|---|---|---|---|---|---|
01 | 100 | 25 | 178 | 49 | 316 | 73 | 562 | ||||
02 | 102 | 26 | 182 | 50 | 324 | 74 | 576 | ||||
03 | 105 | 27 | 187 | 51 | 332 | 75 | 590 | ||||
04 | 107 | 28 | 191 | 52 | 340 | 76 | 604 | ||||
05 | 110 | 29 | 196 | 53 | 348 | 77 | 619 | ||||
06 | 113 | 30 | 200 | 54 | 357 | 78 | 634 | ||||
07 | 115 | 31 | 205 | 55 | 365 | 79 | 649 | ||||
08 | 118 | 32 | 210 | 56 | 374 | 80 | 665 | ||||
09 | 121 | 33 | 215 | 57 | 383 | 81 | 681 | ||||
10 | 124 | 34 | 221 | 58 | 392 | 82 | 698 | ||||
11 | 127 | 35 | 226 | 59 | 402 | 83 | 715 | ||||
12 | 130 | 36 | 232 | 60 | 412 | 84 | 732 | ||||
13 | 133 | 37 | 237 | 61 | 422 | 85 | 750 | ||||
14 | 137 | 38 | 243 | 62 | 432 | 86 | 768 | ||||
15 | 140 | 39 | 249 | 63 | 442 | 87 | 787 | ||||
16 | 143 | 40 | 255 | 64 | 453 | 88 | 806 | ||||
17 | 147 | 41 | 261 | 65 | 464 | 89 | 825 | ||||
18 | 150 | 42 | 267 | 66 | 475 | 90 | 845 | ||||
19 | 154 | 43 | 274 | 67 | 487 | 91 | 866 | ||||
20 | 158 | 44 | 280 | 68 | 499 | 92 | 887 | ||||
21 | 162 | 45 | 287 | 69 | 511 | 93 | 909 | ||||
22 | 165 | 46 | 294 | 70 | 523 | 94 | 931 | ||||
23 | 169 | 47 | 301 | 71 | 536 | 95 | 953 | ||||
24 | 174 | 48 | 309 |
72 | 549 | 96 | 976 |
Code | A | B | C | D | E | F | G | H | X | Y | Z |
---|---|---|---|---|---|---|---|---|---|---|---|
Multiplier | 10s0 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 10-1 | 10-2 | 10-3 |
0603 3digit marking for E24
Example: 101=100Ω 102=1KΩ
E24 | 10 | 11 | 12 | 13 | 15 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 43 | 47 | 51 | 56 | 62 | 68 | 75 | 82 | 91 |
0805~1206 4digit marking
Example
Resistance | 100Ω | 2.2KΩ | 10KΩ | 49.9KΩ | 100KΩ |
---|---|---|---|---|---|
marking | 1000 | 2201 | 1002 | 4992 | 1003 |
포장
Packing Quantity & Reel Specifications (Unit :mm)
Type | ØA | ØB | ØC | W | T | Paper Type(EA) | Emboss Plastic Tape(EA) | ![]() |
---|---|---|---|---|---|---|---|---|
TAR02 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 10,000 | - | |
TAR03 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - | |
TAR05 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - | |
TAR06 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - |
Paper Tape Specifications
![Paper Tape Specifications](/Templates/pic/IMG-Packaging-TAR-02.jpg)
Type | A | B | W | E | F | P0 | P1 | P2 | ΦD0 | T |
---|---|---|---|---|---|---|---|---|---|---|
TAR02 | 0.70±0.05 | 1.16±0.05 | 8.00±0.10 | 1.75±0.05 | 3.5±0.05 | 4.00±0.10 | 2.00±0.05 | 2.00±0.05 | 1.55±0.05 | 0.40±0.03 |
TAR03 | 1.10±0.05 | 1.90±0.05 | 8.00±0.10 | 1.75±0.05 | 3.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.55±0.05 | 0.60±0.03 |
TAR05 | 1.60±0.05 | 2.37±0.05 | 8.00±0.10 | 1.75±0.05 | 3.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.55±0.05 | 0.75±0.05 |
TAR06 | 2.00±0.05 | 3.55±0.05 | 8.00±0.10 | 1.75±0.05 | 3.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.55±0.05 | 0.75±0.05 |
☑ Peel force of top cover tape
☑ The peel speed shall be about 300mm/min±5%
☑ The peel force of top cover tape shall be between 8gf to 60gf
![Paper Tape Specifications](/Templates/pic/IMG-Packaging-TAR-03.jpg)
코드
- 3000
최고의 판매
주요 제품
![자동차 응용 분야](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
![의료 응용 분야](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-02.jpg?v=0d4e718b)
![통신 응용 분야](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-03.jpg?v=ae208f29)