![자동차 응용 분야](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
차폐된 SMD 전원 인덕터 (SCDS 시리즈 SCDS4D22NT2R2)
SCDS4D22NT2R2
차폐된 SMD 소형, 소형 파워 인덕터, 저비용, 저 프로파일 및 고전류, 자기 차폐 구조를 위한 새로운 디자인된 단자. 디지털 장비와 핸드셋에 이상적입니다.
SCDS Series4D22 ±30% 2.2μH 0.025 Ω 1.8A
크기 | 허용 오차 | 인덕턴스 | 시험 조건 | DCR (Ω) 최대값 | IDC (A) |
---|---|---|---|---|---|
4D22 | ±30% | 2.2 | 100KHz, 0.1V | 0.025 | 1.8 |
테이프 및 릴 사양 (단위: mm)
![Tape Reel Specifications - SCDS Series](/Templates/pic/IMG-SCDS-Tape-Reel-Specifications.jpg)
Type | Tape size | Parts Per Reel | ||
---|---|---|---|---|
W | P | 7" | 13" | |
SCDS3D18 | 12 | 8 | 1000 | - |
SCDS4D18 | 12 | 8 | - | 2000 |
SCDS4D28 | 12 | 8 | - | 2000 |
SCDS5D18 | 12 | 8 | - | 2000 |
SCDS5D28 | 12 | 8 | - | 2000 |
SCDS6D28 | 16 | 12 | - | 1500 |
SCDS6D38 | 16 | 12 | - | 1000 |
SMT 파워 인덕터 환경 사양
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: <80% relative humidity. Recommended product should be used within one year from the time of delivery. |
Environmental Test
Test Items | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -25 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Test Items | Specification | Test Conditions / Test Methods |
---|---|---|
Solder Ability Test | Terminal area must have 90% minimum solder coverage. | Dip pads in flux then dip in solder pot (SnCuNi) at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
리플로우
The Condition Of Reflow (Recommendation):
![The Condition Of Reflow](/Templates/pic/IMG-SCDS-The-Condition-Of-Reflow.jpg)
코드
- 2R2
최고의 판매
주요 제품
![자동차 응용 분야](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
![의료 응용 분야](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-02.jpg?v=0d4e718b)
![통신 응용 분야](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-03.jpg?v=ae208f29)