차폐된 SMD 전원 인덕터 (PSDB 시리즈 PSDB1004NT2R7)
PSDB1004NT2R7
쉴드형 SMD 전력 인덕터, 소형, 낮은 프로파일, 낮은 DCR 및 큰 전류, 방사선에 대한 자기 차폐. 페라이트 코어에 직접 연결된 전극, 고포화 인덕터.
PSDB Series1004 ±30% 2.7μH 12 Ω 7.5A
크기 | 허용 오차 | 인덕턴스 | 시험 조건 | DCR (Ω) 최대값 | IDC (A) |
---|---|---|---|---|---|
1004 | ±30% | 2.7 | 100KHz, 0.1V | 12 | 7.5 |
테이프 및 릴 사양 (단위: mm)
Type | Tape Size | Parts Per Reel | |
---|---|---|---|
W | P | 13" | |
PSDB5D28 | 12 | 8 | 2000 |
PSDB1003 | 24 | 16 | 1000 |
PSDB1004 | 24 | 16 | 750 |
PSDB1005 | 24 | 16 | 750 |
SMD 파워 인덕터 환경 사양
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: <80% relative humidity. Recommended product should be used within one year from the time of delivery. |
Environmental Test
Test Items | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -40 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Test Items | Specification | Test Conditions / Test Methods |
---|---|---|
Solder Ability Test | Terminal area must have 90% minimum solder coverage. | Product with Lead-free terminal: Dip pads in flux then dip in solder pot at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
리플로우
The Condition Of Reflow (Recommendation):
코드
- 2R7
- 파일 다운로드
-
-