![自動車アプリケーション](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
自動車アプリケーション
薄膜精密抵抗器0.01%、TC2ppm、ワイヤボンダブル、防錆、MELF。 電流センシング、金属、抗硫黄、サージ、高電圧、TO220/247パッケージ最大100Wまで
続きを読むシールド付きSMDパワーインダクター、コンパクトで低プロファイル、低DCRと大電流、放射線からの磁気シールド付き。
PCDS Series74B ±20% 27μH 0.16 Ω 1.06A
サイズ | 許容差 | インダクタンス | テスト条件 | DCR(Ω)の最大値 | IDC(A) |
---|---|---|---|---|---|
74B | ±20% | 27 | 100KHz, 0.25V | 0.16 | 1.06 |
Type | Tape Size | Parts Per Reel | |
---|---|---|---|
W | P | 13" | |
PCDS63B | 12 | 8 | 1500 |
PCDS74B | 16 | 12 | 1000 |
PCDS105B | 24 | 12 | 750 |
PCDS125B | 24 | 16 | 500 |
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: < 80% relative humidity. Recommended product should be used within one year from the time of delivery. |
Environmental Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -40 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
Solderability test | Terminal area must have 90% minimum solder coverage. | Product with Lead-free terminal: Dip pads in flux then dip in solder pot at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
The Condition Of Reflow (Recommendation):
薄膜精密抵抗器0.01%、TC2ppm、ワイヤボンダブル、防錆、MELF。 電流センシング、金属、抗硫黄、サージ、高電圧、TO220/247パッケージ最大100Wまで
続きを読む