![自動車アプリケーション](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
自動車アプリケーション
薄膜精密抵抗器0.01%、TC2ppm、ワイヤボンダブル、防錆、MELF。 電流センシング、金属、抗硫黄、サージ、高電圧、TO220/247パッケージ最大100Wまで
続きを読むマルチレイヤセラミックコンデンサ、MLCC、チップコンデンサは、多様なサイズと材料で広範な容量をサポートし、非常にコンパクトなサイズ、低インダクタンス、高周波数、優れたはんだ付け性とはんだ付けに対する耐性、低ESR、あらゆる種類のアプリケーションに適応可能です。EIAJ-RC3402に準拠し、EIA-RS198およびIEC PUB. 384-10とも互換性があります。
MC Series0201 ±10% 15K/Reel X5R 1000pF 10V
サイズ | 許容差 | パッケージ | 誘電体 | 容量(pF) | 電圧(V) |
---|---|---|---|---|---|
0201 | ±10% | 15K/Reel | X5R | 1000 | 10 |
Capacitance & Voltage
Dielectric | NPO | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EIA | Size | 0201 | 0402 | 0603 | 0805 | |||||||||||
Code | VDCW | 6.3V | 10V | 25V | 50V | 25V | 50V | 100V | 200V | 50V | 100V | 250V | 50V | 100V | 250V | 500V |
0R1 | 0.1pF | L | L | L | L | N | N | N | N | |||||||
0R2 | 0.2 | L | L | L | L | N | N | N | N | |||||||
0R3 | 0.3 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R4 | 0.4 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R5 | 0.5 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R6 | 0.6 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R7 | 0.7 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R8 | 0.8 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R9 | 0.9 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
1R0 | 1.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
1R2 | 1.2 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
1R5 | 1.5 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
1R8 | 1.8 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
2R0 | 2.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
2R2 | 2.2 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
2R7 | 2.7 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
3R0 | 3.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
3R3 | 3.3 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
3R9 | 3.9 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
4R0 | 4.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
4R7 | 4.7 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
5R0 | 5.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
5R6 | 5.6 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
6R0 | 6.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
6R8 | 6.8 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
7R0 | 7.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
8R2 | 8.2 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
9R0 | 9.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
100 | 10 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
110 | 11 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
120 | 12 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
130 | 13 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
150 | 15 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
160 | 16 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
180 | 18 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
200 | 20 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
220 | 22 | L | L | L | N | N | N | N | S | S | S | T | T | T | T | |
240 | 24 | L | L | L | N | N | N | N | S | S | S | T | T | T | T | |
270 | 27 | L | L | L | N | N | N | N | S | S | S | T | T | T | T | |
300 | 30 | L | L | L | N | N | N | N | S | S | S | T | T | T | T | |
330 | 33 | L | L | L | N | N | N | S | S | S | T | T | T | T | ||
360 | 36 | N | N | N | S | S | S | T | T | T | T | |||||
390 | 39 | N | N | N | S | S | S | T | T | T | T | |||||
430 | 43 | N | N | N | S | S | S | T | T | T | T | |||||
470 | 47 | N | N | N | S | S | S | T | T | T | T | |||||
560 | 56 | N | S | S | S | T | T | T | T | |||||||
680 | 68 | N | S | S | S | T | T | T | T | |||||||
820 | 82 | N | S | S | S | T | T | T | ||||||||
101 | 100 | N | S | S | S | T | T | T |
The letter in cell is expressed the symbol of product thickness.
Electrical Data
Dielectric | NPO |
---|---|
Size | 0201, 0402, 0603, 0805 |
Capacitance* | 0201: 0.1pF ~ 33pF , 0402: 0.1pF ~ 100pF 0603: 0.3pF ~ 100pF , 0805: 0.3pF ~ 100pF |
Capacitance tolerance** | Cap ≦ 5pF: A (± 0.05pF), B (± 0.1pF), C (± 0.25pF) 5pF<Cap<10pF: B (± 0.1pF), C (± 0.25pF) , D (± 0.5pF) Cap ≧ 10pF: F (± 1%), G (± 2%), J (± 5%) |
Rated voltage (VDCW) | 6.3V, 10V, 25V, 50V, 100V, 250V, 500V |
Q * | Cap ≧ 30pF: Q ≧ 1000, Cap<30pF: Q ≧ 400+20C; |
Insulation resistance at Ur | ≧ 10GΩ |
Operating temperature | -55 to +125°C |
Capacitance | ± 30 ppm; 0201 Cap ≧ 22pF, ± 60 ppm |
Termination | Ni / Sn (lead-free termination) |
☑ '*' Measured at the conditions of 25°C ambient temperature and 30 ~ 70% related humidity.
☑ Apply 1.0 ± 0.2Vrms, 1.0MHz ± 10% for Cap ≦ 1000pF; 1.0KHz ± 10% for Cap>1000pF.
Electrical Characteristics
Item | Requirement | Test Method | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
External Appearance | No defects which may affect performance | Visual inspection & Dimension measurement | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Capacitance(Cap.) | Within the specified tolerance that refers on page2 | NPO: (Class I) Cap ≤ 1000pF 1.0 ± 0.2Vrms, 1MHz ± 10% Cap>1000pF 1.0 ± 0.2Vrms, 1KHz ± 10% X7R, X5R, Y5V: (Class II) Cap ≤ 10uF 1.0 ± 0.2Vrms, 1KHz ± 10%** Cap>10uF 0.5 ± 0.2Vrms, 120Hz ± 10% ** Test condition: 0.5 ± 0.2Vrms,1KHz ± 10% X7R: 0805=106(6.3V, 10V), 0603/475 (6.3V) X5R: 0201 ≧ 224 (6.3V, 10V, 16V)#1 0402 ≧ 475 (6.3V, 16V), 0402 ≧ 225 (10V) 0603=106 (6.3V, 10V), #1 Excluding X5R / 0201 / 105 (6.3V); 225 (10V), (1.0 ± 0.2Vrms, 1KHz ± 10%) *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dissipation Factor (D.F.) or Quality factor (Q=1/D.F.) |
NPO: Cap ≥ 30pF, Q ≥ 1000; Cap<30pF, Q ≥ 400+20C X7R, X5R:
Y5V:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dielectric Strength | No evidence of damage or flash over during test | To apply voltage (≤ 100V) 250% Duration: 1 to 5sec Charge and discharge current less than 50mA To apply voltage: 200V ~ 300V ≧ 2 time VDC 500V ~ 999V ≧ 1.5 time VDC 1000V ~ 3000V ≧ 1.2 time VDC Cut-off, set at 10mA TEST=15 sec. RAMP=0 |
Item | Requirement | Test Method | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insulation Resistance | 10GΩ or R x C ≧ 500Ω-F Whichever is smaller X7R, X5R, Y5V:
|
To apply rated voltage for max. 120sec *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
||||||||||||||||||||||||||||||||||||||||||||||
≧ 10GΩ or 100Ω-F whichever is smaller Rated voltage: 200V ~ 630V |
To apply rated voltage (500V max.) for 60sec. | |||||||||||||||||||||||||||||||||||||||||||||||
≧ 10GΩ Rated voltage: >630V |
To apply 500V for 60sec. | |||||||||||||||||||||||||||||||||||||||||||||||
Temperature Characteristic of Capacitance |
|
With no electrical load.
*Before initial measurement (Class II only):
|
||||||||||||||||||||||||||||||||||||||||||||||
Adhesive Strength of Termination | No remarkable damage or removal of the terminations | Pressurizing force: 0201: 2N 0402 & 0603: 5N > 0603: 10N Test time: 10 ± 1 sec |
||||||||||||||||||||||||||||||||||||||||||||||
Vibration Resistance | No remarkable damage Cap change and Q/D.F.: To meet initial spec | Vibration frequency: 10 ~ 55Hz/min Total amplitude: 1.5mm Test time: 6hrs. (two hrs each in three mutually Perpendicular directions.) *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. *Cap./DF(Q) Measurement to be made after de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
||||||||||||||||||||||||||||||||||||||||||||||
Solderability | 95% min. coverage of all metalized area. | Solder temperature: 235 ± 5°C Dipping time: 2 ± 0.5 sec. |
Item | Requirement | Test Method | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bending Test | No remarkable damage. Cap change: NP0: within ± 5% or 0.5pF whichever is larger X7R, X5R, X6S, X7S: within ± 12.5% Y5V: within ± 30% (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the test.) |
The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm per second until the deflection becomes 1 mm and then the pressure shall be maintained for 5 ± 1 sec. * Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. Measurement to be made after keeping at room temp. for 24 ± 2 hrs. |
|||||||||||||||
Resistance to Soldering Heat | No remarkable damage. Cap change: NP0: within ± 2.5% or 0.25pF whichever is larger X7R, X5R, X6S, X7S: within ± 7.5% Y5V: within ± 20% Q/D.F., I.R. and dielectric strength: To meet initial requirements. 25% max. leaching on each edge |
Solder temperature: 260 ± 5°C Dipping time: 10 ± 1 sec Preheating: 120 to 150°C for 1 minute before immerse the capacitor in a eutectic solder. * Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp |
|||||||||||||||
Temperature Cycle | No remarkable damage. |
Conduct the five cycles according to the temperature and time.
Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
Item | Requirement | Test Method | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Humidity (steady state) | No remarkable damage. Cap change: NP0: within ± 5% or 0.5pF whichever is larger X7R, X5R: ≥ 10V**,within ± 12.5%; ≦ 6.3V within ± 25%;C ≥ 1μF,within ± 25% **10V: 0603 ≧ 4.7μF;0402 ≧ 1μF;0201 ≧ 0.1μF, within ± 25%; Y5V: ≥ 10V, within ± 30%; ≦ 6.3V, within +30 / -40% Q/D.F. value: NP0: More than 30pF Q ≥ 350, 10pF ≦ C ≦ 30pF, Q ≥ 275 + 2.5C Less than 10pF Q ≥ 200+10C X7R, X5R:
Y5V:
I.R.: ≥ 10V, 1GΩ or 50 Ω-F whichever is smaller.
|
Test temp.: 40 ± 2°C Humidity: 90 ~ 95%RH Test time: 500 + 24 / -0hrs. Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
Item | Requirement | Test Method | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Humidity load | No remarkable damage. Cap change: NP0: ± 7.5% or 0.75pF whichever is larger. X7R, X5R, X6S, X7S: ≥ 10V**,within ± 12.5%; ≦ 6.3V within ± 25%; TT series & C ≥ 1uF,within ± 25% **10V: 0603 4.7μF;0402 1μF;0201 ≧ ≧ ≧ 0.1μF, within ± 25%; Y5V: ≥ 10V, within ± 30%; ≦ 6.3V, within +30 / -40% Q/D.F. value: NP0: C ≥ 30pF,Q ≥ 200;C<30pF, Q ≥ 100+10 / 3C X7R, X5R:
Y5V:
I.R.: ≥ 10V, 500MΩ or 25 Ω-F whichever is smaller.
|
Test temp.: 40 ± 2°C Humidity: 90 ~ 95%RH Test time: 500 + 24 / -0 hrs. To apply voltage: Rated voltage (MAX. 500V) Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
Item | Requirement | Test Method | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
High Temperature Load (Endurance) | No remarkable damage.
Y5V:
I.R.: ≥ 10V, 1GΩ or 50 Ω-F whichever is smaller.
|
Test temp.:
(6) 150% of rated voltage for below range
|
Packaging Quantity (Unit: mm)
Type | Thickness / Symbol | Packaging (7" Reel) | ||
---|---|---|---|---|
Paper Tape | Plastic Tape | |||
0201 | 0.30 ± 0.03 | L | 15K | - |
0.30 ± 0.05 | L | 15K | - | |
0.30 ± 0.09 | L | 15K | - | |
0402 | 0.50 ± 0.05 | N | 10K | - |
0.5+0.02/-0.05 | Q | 10K | - | |
0.50 ± 0.20 | E | 10K | - | |
0603 | 0.50 ± 0.10 | H | 4K | - |
0.80 ± 0.10 | S | 4K | - | |
0.80 +0.15 / -0.10 | X | 4K | - | |
0805 | 0.50 ± 0.10 | H | 4K | - |
0.60 ± 0.10 | A | 4K | - | |
0.80 ± 0.10 | B | 4K | - | |
0.85 ± 0.10 | T | 4K | - | |
1.25 ± 0.10 | D | - | 3K | |
1.25 ± 0.20 | I | - | 3K | |
1206 | 0.80 ± 0.10 | B | 4K | - |
0.85 ± 0.10 | T | 4K | - | |
0.95 ± 0.10 | C | - | 3K | |
1.15 ± 0.15 | J | - | 3K | |
1.25 ± 0.10 | D | - | 3K | |
1.60 ± 0.20 | G | - | 2K | |
1.60 +0.30 / -0.10 | P | - | 2K | |
1210 | 0.85 ± 0.10 | T | - | 3K |
0.95 ± 0.10 | C | - | 3K | |
1.25 ± 0.10 | D | - | 3K | |
1.60 ± 0.20 | G | - | 2K | |
2.00 ± 0.20 | K | - | 1K | |
2.50 ± 0.30 | M | - | 1K | |
2.50 ± 0.30 | M | - | 0.5K | |
1808 | 1.25 ± 0.10 | D | - | 2K |
1.10 ± 0.15 | F | - | 2K | |
1.60 ± 0.20 | G | - | 2K | |
2.00 ± 0.20 | K | - | 1K | |
1812 |
1.25 ± 0.10 | D | - | 1K |
1.60 ± 0.20 | G | - | 1K | |
2.00 ± 0.20 | K | - | 1K | |
2.50 ± 0.30 | M | - | 0.5K | |
2.80 ± 0.30 | U | - | 0.5K | |
0612 | 0.80 ± 0.10 | B | 4K | - |
Tape and Reel (Unit: mm)
Type | Chip Size | |||||||
---|---|---|---|---|---|---|---|---|
0201 | 0402 | 0603 | 0805 | 1206 0612 |
1210 | 1808 | 1812 | |
∅ C | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 |
W | 9.0 ± 1.0 | 9.0 ± 1.0 | 9.0 ± 1.0 | 9.0 ± 1.0 | 9.0 ± 1.0 | 9.0 ± 1.0 | 13.5 ± 1.0 | 13.5 ± 1.0 |
∅ A | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") |
∅ B | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 80.0 ± 1.0 (7") | 80.0 ± 1.0 (7") |
Plastic Tape Size Specification (Unit: mm)
Type | 0805 | 1206 | 1210 | 1808 | 1812 | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thickness | D | I | C | J | D | G | P | T | C | D | G | K | M | D | F | G | K | D | F | G | K | M | U | |
A0 | <1.80 | <200 | <2.30 | <3.05 | <3.05 | <3.20 | <2.50 | <3.90 | ||||||||||||||||
B0 | <2.70 | <3.70 | <4.00 | <3.80 | <3.80 | <3.95 | <5.30 | <5.30 | ||||||||||||||||
T | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.25 ± 0.10 | 0.25 ± 0.10 | ||||||||||||||||
K0 | <2.50 | <2.50 | <2.50 | <1.50 | <2.50 | <3.00 | <2.50 | <2.50 | <3.50 | |||||||||||||||
W | 8.00 ± 0.20 | 8.00 ± 0.20 | 8.00 ± 0.20 | 8.00 ± 0.20 | 8.00 ± 0.20 | 8.00 ± 0.20 | 12.0 ± 0.20 | 12.0 ± 0.20 | ||||||||||||||||
P0 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | ||||||||||||||||
P1 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 8.00 ± 0.10 | ||||||||||||||||
P2 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.10 | 2.00 ± 0.05 | ||||||||||||||||
D0 | 1.50 + 0.1/-0 | 1.50 ± 0.05 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | ||||||||||||||||
D1 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.50 ± 0.10 | 1.50 ± 0.10 | ||||||||||||||||
E | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | ||||||||||||||||
F | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 5.50 ± 0.10 | 5.50 ± 0.10 |
Paper Tape Size Specification (Unit: mm)
Type | 0201 | 0402 | 0603 | 0805 | 1206 / 0612 | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Thickness | L | N | E | S | H | X | A | H | B | T | B | T |
A0 | 0.39 ± 0.07 | 0.70 ± 0.20 | 1.05 ± 0.30 | 1.50 ± 0.20 | 1.50 ± 0.20 | 1.90 ± 0.50 | ||||||
B0 | 0.69 ± 0.07 | 1.20 ± 0.20 | 1.80 ± 0.30 | 2.30 ± 0.20 | 2.30 ± 0.20 | 3.50 ± 0.50 | ||||||
T | ≦0.50 | ≦0.80 | ≦1.20 | ≦1.15 | ≦1.30 | ≦1.30 | ||||||
W | 8.00 ± 0.10 | 8.00 ± 0.10 | 8.00 ± 0.10 | 8.00 ± 0.10 | 8.00 ± 0.10 | 8.00 ± 0.10 | ||||||
P0 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | ||||||
P1 | 2.00 ± 0.05 | 2.00 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | ||||||
P2 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | ||||||
D0 | 1.55 ± 0.05 | 1.55 ± 0.05 | 1.55 ± 0.05 | 1.55 ± 0.05 | 1.55 ± 0.05 | 1.50 ± 0.05 | ||||||
E | 1.75 ± 0.05 | 1.75 ± 0.05 | 1.75 ± 0.05 | 1.75 ± 0.05 | 1.75 ± 0.05 | 1.75 ± 0.10 | ||||||
F | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 |
薄膜精密抵抗器0.01%、TC2ppm、ワイヤボンダブル、防錆、MELF。 電流センシング、金属、抗硫黄、サージ、高電圧、TO220/247パッケージ最大100Wまで
続きを読む