APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, con cable de unión, anticorrosivo, MELF. Detección...
Lee masResistores de potencia SMD TO-263 (Serie STR35 STR35FTE1600)
STR35FTE1600
Resistor SMD de alta potencia de hasta 35W, película gruesa con empaquetado TO263. Las aplicaciones son fuente de alimentación conmutada y circuitos snubber, controlador de máquina automatizada, amplificador de potencia RF, carga de pulso de baja energía, UPS, regulación de voltaje, resistor de carga.
STR35 Series
Especificaciones de Características Eléctricas
| Item Type | Resistance Range | TCR (PPM/°C) | |||
|---|---|---|---|---|---|
| ±0.5% | ±1% | ±5% | ±10% | ||
| STR35 | - | - | 0.05Ω - 0.1Ω | No Specified | |
| - | ≧0.1Ω - 1Ω | No Specified | |||
| - | ≧1Ω - 5Ω | ±100 ±200 ±300 | |||
| ≧10Ω - 100KΩ | ±50 ±100 ±200 | ||||
| ≧5Ω - 10Ω | ±100 ±200 ±300 | ||||
☑ Operating Voltage: 350V Max.
☑ Dielectric Strength: 1800VAC
☑ Insulation Resistance: 10GΩ min.
☑ Working Temperature Range: -65°C to +150°C
Características Ambientales
| Item | Requirement | Test Method |
|---|---|---|
| Temperature Coefficient of Resistance (T.C.R.) | As Spec. | JIS-C-5201-1 4.8 IEC 60115-1 4.8 Referenced to 25°C, ΔR taken at +105°C |
| Short Time Overload | ΔR±0.3% | JIS-C-5201-1 4.13 IEC 60115-1 4.13 2 times rated power with applied voltage not to exceed 1.5 times maximum continuous operating voltage for 5 seconds |
| Load Life | ΔR±1.0% | JIS-C-5201-1 4.25 IEC 60115-1 4.25 2,000 hours at rated power |
| Temperature Cycling | ΔR±0.3% | JESD22 Method JA-104 -65°C~+150°C, 1000 cycles |
| Damp Heat with Load | ΔR±0.5% | JIS-C-5201-1 4.24 IEC 60115-1 4.24 40±2°C, 90~95% R.H., RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF” |
| Vibration, High Frequency | ΔR±0.2% | MIL-STD-202 Method 204 20g peak |
| Solderability | 90% min. coverage | J-STD-002 245±5°C for 3 seconds |
| Terminal Strength | ΔR±0.2% | AEC-Q200-006 (Pull Test)2.4N |
☑ Maximum Torque: 0.9 Nm
☑ When in Free Air at 25°C, the STR35 is Rated for 2.5W
☑ The Case Temperature is to be used for the Definition of the Applied Power Limit
☑ The Case Temperature Measuerment must be made with a Thermocouple Contacting the Center of the Component mounted on the Deisgned Heat Sink.
☑ Thermal Grease should be Applied Properly.
☑ Storage Temperature: 25±5℃; Humidity: <75%RH
Condición de Soldadura
(1) Time of IR reflow soldering at maximum temperature point 260°C：10s
(2) Time of soldering iron at maximum temperature point 410°C：5s
Embalaje
Reel Specifications & Packaging Quantity
| Type | Packaging Quantity | Tape Width | Reel Diameter | ΦA (mm) | ΦB (mm) | ΦC (mm) | W (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|
| STR35 | 500 pcs | 24mm | 13 inch | 330±1.0 | 100±0.5 | 13.5±0.3 | 25.4±0.5 | 30.0±0.5 |
Emboss Plastic Tape Specifications
| Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ΦD0 (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| STR35 | 10.80±0.10 | 16.13±0.10 | 24.0±0.30 | 1.75±0.1 | 11.5±0.1 | 4.0±0.1 | 16.0±0.1 | 2.0±0.1 | 1.55±0.05 | 5.25±0.20 |
- Descarga de Archivos
Producto Principal
APLICACIONES MÉDICAS
Inductores de chip de alta frecuencia cerámicos, tamaño pequeño hasta 01005. Película delgada, multicapa,...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alto Q, baja TCR....
Lee mas