APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, con cable de unión, anticorrosivo, MELF. Detección...
Lee masResistor de Chip de Tira de Metal de Baja Resistencia (Serie LRP LRP12JTWRR039)
LRP12JTWRR039
Resistor de chip de baja resistencia (tira de metal) - Serie LRP
LRP Series2512 ±5% 75 3W Series0.039Ω 4K/Reel
| Tamaño | Tolerancia | TCR (ppm /℃) | Potencia | Resistencia (Ohm) | Paquete |
|---|---|---|---|---|---|
| 2512 | ±5% | 75 | 3W | 0.039 | 4K/Reel |
Características Ambientales
| Item | Requirement | Test Method |
|---|---|---|
| Temperature Coefficient of Resistance (T.C.R.) |
As Spec. | IEC60115-1 4.8 JIS-C-5201-1 4.8 -55°C~+125°C, 25°C is the reference temperature |
| Short Time Overload | ±1.0% | IEC60115-1 4.13 JIS-C-5201-1 4.13 5*rated power for 5 seconds |
| Insulation Resistance | ³10G | IEC60115-1 4.6 JIS-C-5201-1 4.13 100V DC for 1 minute |
| Endurance | ±1.0% | IEC60115-1 4.25 JIS-C-5201-1 4.25.1 70±2°C, rated power for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF” |
| Biased Humidity | ±1.0% | MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power |
| Dry Heat | ±1.0% | IEC60115-1 4.23.2 JIS-C-5201-1 4.23.2 at +170°C for 1000 hrs |
| Bending Strength | ±1.0% | JIS-C-5201-1 4.33 IEC-60115-1 4.33 Bending width 2mm once for 5 seconds |
| Solderability | 95% min. coverage | JIS-C-5201-1 4.17 IEC-60115-1 4.17 245±5°C for 3 seconds |
| Resistance to Soldering Heat | ±0.5% | JIS-C-5201-1 4.18 IEC-60115-1 4.18 260±5°C for 10 seconds |
| Rapid Change of Temperature | ±1.0% | JIS-C-5201-1 4.19 IEC-60115-1 4.19 -55°C to +155°C, 5 cycles |
| Low Temperature Storage | ±1.0% | IEC60115-1 4.23.4 JIS-C-5201-1 4.23.4 at -55°C for 2 hrs |
RCWV(Rated Continuous Working Voltage)= √(P*R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15~28°C; Humidity < 80%RH
Condición de Soldadura
(Reflow soldering only)
(1) Time of IR reflow soldering at maximum temperature point 260°C：10s
Embalaje
Packing Quantity & Reel Specifications
| Type | Resistance (mΩ) | Packaging Quantity | Tape Width | Reel Diameter | ΦA (mm) | ΦB (mm) | ΦC (mm) | W (mm) | T (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| LRP06 | 8~20 | Paper | 5K | 8mm | 7 inch | 178.5±1.5 | 60+1/-0 | 13.0±0.2 | 9.0±0.5 | 12.5±0.5 |
| LRP 12 | 4~100 | Embossed | 4K | 12mm | 7 inch | 178.5±1.5 | 60±1.0 | 13.0±0.5 | 13.0±1.0 | 15.5±0.5 |
| LRP12 | 3 | Embossed | 2K | 12mm | 7 inch | 178.5±1.5 | 60±1.0 | 13.0±0.5 | 13.0±1.0 | 15.5±0.5 |
Embossed Plastic Tape Specifications
| Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ΦD0 (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| LRP12 | 3.50±0.10 | 6.70±0.10 | 12.0±0.30 | 1.75±0.10 | 5.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.50+0.1, -0 | 1.20+0 |
| LRP12(3mΩ) | 3.50±0.10 | 6.70±0.10 | 12.0±0.30 | 1.75±0.10 | 5.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.50+0.1, -0 | 1.45±0.20 |
Paper Tape Specifications
| Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ΦD0 (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| LRP06 | 1.90±0.10 | 3.50±0.20 | 8.0±0.20 | 1.75±0.10 | 3.50±0.05 | 4.00±0.10 | 4.00±0.05 | 2.00±0.05 | 1.50+0.1, -0 | 0.85±0.10 |
Código
- R039
- Descarga de Archivos
-
-
Producto Principal
APLICACIONES MÉDICAS
Inductores de chip de alta frecuencia cerámicos, tamaño pequeño hasta 01005. Película delgada, multicapa,...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alto Q, baja TCR....
Lee mas