APLICACIONES AUTOMOTRICES
Resistor de película delgada de precisión 0.01%, TC2ppm, wirebondale, anticorrosivo, MELF. Detección...
Lee masInductor de potencia DIP (Serie DRGH DRGH895KT223)
DRGH895KT223
Inductor de alambre de alta potencia para inmersión.
DRGH Series895 ±10% 22000μH 44.9 Ω 0.059A
| Tamaño | Tolerancia | Inductancia | Condición de prueba | DCR (Ω) máximo. | IDC (A) |
|---|---|---|---|---|---|
| 895 | ±10% | 22000 | 1KHz, 0.1V | 44.9 | 0.059 |
Confiabilidad del inductor de potencia de alambre de ferrita DIP
Mechanical Performance
| Item | Specification | Test Method |
|---|---|---|
| Vibration | Appearance: No damage L change: within ± 10% RDC: within specification |
Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1min Amplitude: 1.5mm Time: 2hrs for each axis (X, Y & Z), total 6hrs |
| Resistance to Soldering Heat | Appearance: No Damage | Pre-heating: 150°C, 1Min. Solder Composition: Sn / Ag / Cu = 95.6 / 3.0 / 0.5 Solder Temperature: 260 ± 5°C Immersion Time: 4 ± 1Sec. |
| Solderability | The electrodes shall be at least 90% covered with new solder coating. | Pre-heating: 150°C, 1min Solder Composition: Sn / Ag / Cu = 95.6 / 3.0 / 0.5 Solder Temperature: 245 ± 5°C Immersion Time: 4 ± 1sec |
Environmental Performance
| Item | Specification | Test Method | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Temperature Shock | Appearance: No damage L change: within ± 10% RDC: within specification |
10 cycles (Air to Air) 1 cycles shall consist of: 30 minutes exposure to –55 °C 30 minutes exposure to 125 °C 15 seconds maximum transition between temperatures |
||||||||||||||
| Temperature Cycle | One cycle:
Total: 100cycles |
|||||||||||||||
| Humidity Resistance | Temperature: 40 ± 2°C Relative Humidity: 90 ~ 95% Time: 1000hrs Measured after exposure in the room condition for 24hrs |
|||||||||||||||
| Heat Temperature Resistance | Temperature: 85 ± 3°C Relative Humidity: 20% Applied Current: Rated Current Time: 1000hrs Measured after exposure in the room condition for 24hrs |
|||||||||||||||
| Low Temperature Resistance | Temperature: -25 ± 3°C Relative Humidity: 0% Time: 1000hrs Measured after exposure in the room condition for 24hrs |
☑ Storage Temperature: 15 ~ 28°C; < 80% RH
Reflujo
Embalaje
| Type | Parts Plate | Parts Per Bind |
|---|---|---|
| DRGH664 | 200 | 2400 |
| DRGH855 | 200 | 2400 |
| DRGH875 | 200 | 2400 |
| DRGH895 | 200 | 2400 |
| DRGH110 | 144 | 1296 |
Código
- 223
- Descargar archivos
-
-
Producto Principal
APLICACIONES MÉDICAS
Inductores de chip cerámico de alta frecuencia, tamaño pequeño hasta 01005. Película delgada, multicapa,...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alto voltaje, alta frecuencia, bajo ruido, alto Q, bajo TCR....
Lee mas