APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, wirebondale, anti-corrosivo, MELF. Detección...
Lee masBolas de chip multicapa (Serie CBM CBM02YTAN151)
CBM02YTAN151
Bead de chip multicapa para protección EMI, baja resistencia de corriente continua, alta resistencia al calor de soldadura, disponibilidad en múltiples tamaños para todo tipo de aplicaciones 4C, varios equipos electrónicos.
CBM Series±25% 10K/REEL 0.6 Ω 150Ω 200mA
| Tolerancia | Paquete | Condición de prueba | DCR (Ω) máx. | Impedancia (Ω) | Corriente nominal (mA) máx. |
|---|---|---|---|---|---|
| ±25% | 10K/REEL | 100MHz | 0.6 | 150 | 200 |
Características Ambientales
Electrical Performance Test
| Item | Specification | Test Method |
|---|---|---|
| Impedance | Refer to standard electrical spec. | HP4286A |
| DCR | HP 4338 digital mili-ohm meter |
Mechanical Performance Test
| Item | Specification | Test Method |
|---|---|---|
| Substrate Bending Test | Without deformation cases Impedance: within ± 30% of initial value DC Resistance shall be satisfied |
Test device shall be soldered on the substrate Substrate Dimension: 100 x 40 x 0.8mm Deflection: 3.0mm Keeping Time: 10sec and then return  |
| Vibration | Appearance: No damage Impedance: within ± 30% of initial value DC Resistance shall be satisfied |
Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1min Amplitude: 1.5mm (peak-peak) Time: 2hrs for each axis (X, Y & Z), total 6hrs |
| Resistance to Soldering Heat | No visible damage Electrical characteristics and mechanical characteristics shall be satisfied |
Solder temp: 265 ± 5°C Immersion time: 6 ± 1sec Preheating: 100°C to 150°C, 1 minute Measured after exposure in the room condition for 24hrs Solder: Sn-3Ag-0.5Cu |
| Solderability | 95% min. coverage of all metabolized area | Solder Temperature: 240 ± 5°C Immersion Time: 3 ± 1sec Solder: Sn-3Ag-0.5Cu |
| Terminal Strength | Without deformation cases Impedance: within ± 30% of initial value DC Resistance shall be satisfied |
Solder chip on PCB and applied 10N (1.02Kgf) for 10 sec |
| Temperature Cycle | Appearance: No damage Impedance: within ± 30% of initial value DC Resistance shall be satisfied |
One cycle: One cycle/step1: -55 ± 3°C for 30 ± 3min step2: standard atmospheric conditions 5s or less step3:125 ± 2°C for 30 ± 3min step4: standard atmospheric conditions 5s or less Total: 100cycles Measured after exposure in the room condition for 24hrs |
| Humidity Resistance | Temperature: 60 ± 2°C Relative Humidity: 90 ~ 95% Applied Current: Rated Current(maximum value) Time: 1008 ± 12hrs Measured after exposure in the room condition for 24hrs |
|
| High Temperature Resistance | Temperature: 125 ± 2°C Applied Current: Rated Current(maximum value) Time: 1008 ± 12hrs Measured after exposure in the room condition for 24hrs |
|
| Low Temperature Storage Life Test | Temperature: -55 ± 2°C Time: 1008 ± 12hrs Measured after exposure in the room condition for 24hrs |
|
| Thermal Shock | -55°C ~ 125°C kept stabilized for 30 minutes each for 100 cycles Measured after exposure in the room condition for 24hrs |
☑ Operating Temperature: -55°C ~ 125°C
☑ Storage Temperature: 15 ~ 28°C ; Humidity < 80%RH
Condición de soldadura
(1) Time of IR reflow soldering at maximum temperature point 260°C: 10s
(2) Time of soldering iron at maximum temperature point 280°C: 3s
Embalaje
| Type | Tape Dimensions | Reel Dimensions | Recommended Pattern | Quantity (EA) |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | T | W | P | F | K | Tape Type |
A | B | C | D | A | B | C | ||
| CBM01 | 0.38 | 0.68 | 1.10 | 8.0 | 2.0 | 3.5 | - | B | 178 | 60 | 10 | 2 | 0.25 | 0.69 | 0.32 | 15000 |
| CBM02 | 0.65 | 1.15 | 0.80 | 8.0 | 2.0 | 3.5 | - | B | 178 | 60 | 10 | 2 | 0.50 | 2.10 | 0.55 | 10000 |
| CBM03 | 1.10 | 1.90 | 1.10 | 8.0 | 4.0 | 3.5 | - | B | 178 | 60 | 10 | 2 | 0.60 | 2.60 | 0.80 | 4000 |
| CBM05 | 1.55 | 2.30 | 1.20 | 8.0 | 4.0 | 3.5 | - | B | 178 | 60 | 10 | 2 | 0.66 | 3.23 | 1.47 | 4000 |
| CBM04 | 1.90 | 3.50 | 1.40 | 8.0 | 4.0 | 3.5 | 0.2 | A | 178 | 60 | 10 | 2 | 2.20 | 4.40 | 2.06 | 3000 |
| CBM10 | 2.90 | 3.60 | 1.70 | 8.0 | 4.0 | 3.5 | 0.2 | A | 178 | 60 | 10 | 2 | 2.13 | 4.06 | 2.74 | 2000 |
| CBM08 | 2.90 | 4.90 | 1.40 | 12 | 4.0 | 5.5 | 0.3 | A | 178 | 60 | 14 | 2 | 2.70 | 5.70 | 2.24 | 2000 |
| CBM12 | 3.60 | 4.90 | 2.05 | 12 | 8.0 | 5.5 | 0.3 | A | 178 | 60 | 14 | 2 | 2.57 | 5.90 | 4.22 | 1000 |
| CBM20 | 5.40 | 5.95 | 3.42 | 12 | 8.0 | 5.5 | 0.33 | A | 330 | 100 | 14.5 | 2 | 3.05 | 9.19 | 6.1 | 2000 |
- Descarga de Archivos
-
-
Producto Principal
APLICACIONES MÉDICAS
Inductores de chip cerámico de alta frecuencia, tamaño pequeño hasta 01005. Inductor de película...
Lee mas
APLICACIONES DE COMUNICACIÓN
El capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alta Q, bajo TCR....
Lee mas