APLICACIONES AUTOMOTRICES
Resistor de precisión de película delgada 0.01%, TC2ppm, con cable de unión, anticorrosivo, MELF. Detección...
Lee masResistor de chip de película delgada profesional de grado automotriz - Serie ART..A
ART..A Series0402 ±0.5% 25 1/10W Series430Ω 10K/Reel
Tamaño | Tolerancia | TCR (ppm /℃) | Potencia | Resistencia (Ohm) | Paquete |
---|---|---|---|---|---|
0402 | ±0.5% | 25 | 1/10W | 430 | 10K/Reel |
Item | Requirement | Test Method | |
---|---|---|---|
Temperature Coefficient of Resistance (T.C.R.) | As Spec. | MIL-STD-202 Method 304 +25/-55/+25/+125/+25°C |
|
Short Time Overload(Standard operation mode | Δ R± 0.10% | JIS-C-5201-1 4.13 RCWV x 2.5 or Max. overload voltage whichever is lower for 5 seconds |
|
Short Time Overload(Power operation mode | Δ R± 0.25% | ||
Insulation Resistance | >1000 MΩ | MIL-STD-202 Method 302 Apply 100VDC for 1 minute |
|
Endurance | Standard at 70°C, 1000hrs, Δ R± 0.15% | MIL-STD-202 Method 108 RCWV with 1.5 hrs ON and 0.5 hrs OFF |
|
Standard at 70°C, 8000hrs, Δ R± 0.25% | |||
Power at 70°C, 1000hrs, Δ R± 0.3% | |||
Power at 70°C, 8000hrs, Δ R± 0.5% | |||
Advanced temperature at 85°C, 1000hrs, Δ R± 0.5% | |||
High Temperature Exposure | 125°C , Δ R± 0.15% | EN 60115-1 CLAUSE 4.25.3 1000 hrs |
|
155°C , Δ R± 0.3% | |||
175°C , Δ R± 0.5% | |||
Temperature Cycling | Δ R± 0.25% | JESD22 Method JA-104 -55°C to +155°C, 1000 cycles |
|
Biased Humidity | Standard operation mode Δ R± 0.5% |
MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power(≦100V) |
|
Bending Strength (Board Flex) | Δ R± 0.1% | JIS-C-5201-1 4.33 Bending once for 60 seconds. Bending displacement 0402 0603 0805 1206 size: 3mm |
|
Solderability | 95% min. coverage | JIS-C-5201-1 4.17 IEC-60115-1 4.17 245± 5°C for 3 seconds |
|
Resistance to Soldering Heat | Δ R± 0.1% | JIS-C-5201-1 4.18 IEC-60115-1 4.18 260± 5°C for 10 seconds |
|
Terminal strength | No broken | AEC-Q200-006 0402 0603: Force of 1.8kg for 60 seconds. Others: Force of 1.8kg for 60 seconds. |
|
Mechanical Shock | Δ R± 0.1% | MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. |
|
Vibration | Δ R± 0.1% | MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz |
|
ESD | Δ R± 0.5% | AEC-Q200-002 Human body model 0402 0.2KV;0603 0.5KV; 0805 1.5KV; 1206 2.0KV |
|
Resistance to solvents | Marking Unsmeared | MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. |
|
Flammability | No ignition of the tissue paper or scorching or the pinewood board | UL-94 V-0 or V-1 are acceptable. Electrical test not required. |
|
External Visual | No visible damage. | MIL-STD-883 Method 2009 Electrical test not required. Inspect device construction, marking and workmanship. |
|
Physical Dimension | As Spec | JESD22 Method JB-100 Verify physical dimensions to the applicable device detail specification. Note: User(s) and Suppliers Specification. Electrical test not required. |
RCWV (Rated continuous working voltage)= √(P x R) or Max. Operating voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH
☑ Shelf Life: 2 years from production date.
Marking Table
Code | E96 | Code | E96 | Code | E96 | Code | E96 | ||||
---|---|---|---|---|---|---|---|---|---|---|---|
01 | 100 | 25 | 178 | 49 | 316 | 73 | 562 | ||||
02 | 102 | 26 | 182 | 50 | 324 | 74 | 576 | ||||
03 | 105 | 27 | 187 | 51 | 332 | 75 | 590 | ||||
04 | 107 | 28 | 191 | 52 | 340 | 76 | 604 | ||||
05 | 110 | 29 | 196 | 53 | 348 | 77 | 619 | ||||
06 | 113 | 30 | 200 | 54 | 357 | 78 | 634 | ||||
07 | 115 | 31 | 205 | 55 | 365 | 79 | 649 | ||||
08 | 118 | 32 | 210 | 56 | 374 | 80 | 665 | ||||
09 | 121 | 33 | 215 | 57 | 383 | 81 | 681 | ||||
10 | 124 | 34 | 221 | 58 | 392 | 82 | 698 | ||||
11 | 127 | 35 | 226 | 59 | 402 | 83 | 715 | ||||
12 | 130 | 36 | 232 | 60 | 412 | 84 | 732 | ||||
13 | 133 | 37 | 237 | 61 | 422 | 85 | 750 | ||||
14 | 137 | 38 | 243 | 62 | 432 | 86 | 768 | ||||
15 | 140 | 39 | 249 | 63 | 442 | 87 | 787 | ||||
16 | 143 | 40 | 255 | 64 | 453 | 88 | 806 | ||||
17 | 147 | 41 | 261 | 65 | 464 | 89 | 825 | ||||
18 | 150 | 42 | 267 | 66 | 475 | 90 | 845 | ||||
19 | 154 | 43 | 274 | 67 | 487 | 91 | 866 | ||||
20 | 158 | 44 | 280 | 68 | 499 | 92 | 887 | ||||
21 | 162 | 45 | 287 | 69 | 511 | 93 | 909 | ||||
22 | 165 | 46 | 294 | 70 | 523 | 94 | 931 | ||||
23 | 169 | 47 | 301 | 71 | 536 | 95 | 953 | ||||
24 | 174 | 48 | 309 |
72 | 549 | 96 | 976 |
Code | A | B | C | D | E | F | G | H | X | Y | Z |
---|---|---|---|---|---|---|---|---|---|---|---|
Multiplier | 10s0 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 10-1 | 10-2 | 10-3 |
0603 3digit marking for E24
Example: 101=100Ω 102=1KΩ
E24 | 10 | 11 | 12 | 13 | 15 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 43 | 47 | 51 | 56 | 62 | 68 | 75 | 82 | 91 |
Packing Quantity & Reel Specifications (Unit :mm)
Type | ØA | ØB | ØC | W | T | Paper Type(EA) | Emboss Plastic Tape(EA) | |
---|---|---|---|---|---|---|---|---|
ART02 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 10,000 | - | |
ART03 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - | |
ART05 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - | |
ART06 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - |
Paper Tape Specifications
Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ØD0 (mm) | T (mm) |
---|---|---|---|---|---|---|---|---|---|---|
ART02 | 0.70 ± 0.05 | 1.16 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 2.00 ± 0.05 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.40 ± 0.03 |
ART03 | 1.10 ± 0.05 | 1.90 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.60 ± 0.03 |
ART05 | 1.60 ± 0.05 | 2.37 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.75 ± 0.05 |
ART06 | 2.00 ± 0.05 | 3.55 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 2.00 ± 0.10 | 1.55 ± 0.05 | 0.75 ± 0.05 |
■ Peel force of top cover tape.
■ The peel speed shall be about 300mm/min ± 5%.
■ The peel force of top cover tape shall be between 8gf to 60gf.
Type | A | B | W | E | F | P0 | P1 | P2 | ΦD0 | T |
---|---|---|---|---|---|---|---|---|---|---|
ART03 | 1.10±0.05 | 1.90±0.05 | 8.00±0.10 | 1.75±0.05 | 3.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.55±0.05 | 0.60±0.03 |
☑ Peel force of top cover tape
☑ The peel speed shall be about 300mm/min±5%
☑ The peel force of top cover tape shall be between 8gf to 60gf
Resistor de precisión de película delgada 0.01%, TC2ppm, con cable de unión, anticorrosivo, MELF. Detección...
Lee masInductores de chip de alta frecuencia cerámicos, tamaño pequeño hasta 01005. Película delgada, multicapa,...
Lee masEl capacitor cerámico multicapa ofrece alta tensión, alta frecuencia, bajo ruido, alto Q, baja TCR....
Lee mas