AUTOMOTIVE APPLICATIONS
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreSMD miniature power inductor , small size and low profile , it corresponds to high current , shield structure magnetically. Storng structure against a shock -proof for LCD display, small size of DC to DC converters, PDA.
SDIA Series0410 ±20% 2.2μH 0.15 Ω 1.15A
Size | Tolerance | Inductance | Test Condition | DCR (Ω) max. | IDC (A) |
---|---|---|---|---|---|
0410 | ±20% | 2.2 | 100KHz, 0.25V | 0.15 | 1.15 |
Type | Tape Size | Parts Per Reel | ||
---|---|---|---|---|
W | P | 7" | 13" | |
SDIA0310 | 8 | 4 | 2000 | - |
SDIA0312 | 8 | 4 | 2000 | - |
SDIA0315 | 8 | 4 | 2000 | - |
SDIA0410 | 12 | 8 | - | 5000 |
SDIA0412 | 12 | 8 | - | 4500 |
SDIA0415 | 12 | 8 | - | 3000 |
SDIA0418 | 12 | 8 | - | 3000 |
SDIA0420 | 12 | 8 | - | 3000 |
SDIA0430 | 12 | 8 | - | 2500 |
SDIA0520 | 12 | 8 | - | 2500 |
SDIA0540 | 12 | 8 | - | 1500 |
SDIA0620 | 12 | 8 | - | 2000 |
SDIA0628 | 16 | 8 | - | 1500 |
SDIA0645 | 16 | 12 | - | 1000 |
SDIA0840 | 16 | 12 | - | 1000 |
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: < 80% relative humidity. Recommended product should be used within 12 months from the time of delivery. |
Environmental Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% | Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -25 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. | |
Humidity test | Temperature 40 ± 2°C, 90~95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. | |
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
Solderability test | Terminal area must have 90% minimum solder coverage. | Product with Lead-free terminal: Dip pads in flux then dip in solder pot at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% | Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
The Condition Of Reflow (Recommendation):
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreCeramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...
Read MoreMultilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...
Read More