Shielded SMD Power Inductor (SCDS Series SCDS6D28NT7R3) Manufacturers

Shielded SMD Power Inductor (SCDS Series SCDS6D28NT7R3)

Send Inquiry Add to List

SCDS6D28NT7R3

Shielded SMD Power Inductor (SCDS Series SCDS6D28NT7R3) Files Download

Shielded SMD small , miniauture power inductor , new designed terminat for low cost, low profile and high current, magnetically shielded construction. Ideal for digital equipment and hand set.
SCDS Series6D28 ±30% 7.3μH 0.054 Ω 2.1A

Size	Tolerance	Inductance	Test Condition	DCR (Ω) max.	IDC (A)
6D28	±30%	7.3	10KHz, 0.1V	0.054	2.1

Tape and Reel Specifications (Unit: mm)

Type	Tape size		Parts Per Reel
Type	W	P	7"	13"
SCDS3D18	12	8	1000	-
SCDS4D18	12	8	-	2000
SCDS4D28	12	8	-	2000
SCDS5D18	12	8	-	2000
SCDS5D28	12	8	-	2000
SCDS6D28	16	12	-	1500
SCDS6D38	16	12	-	1000

SMT Power Inductor Environmental Specifications

General

Item	Specification
Shelf Storage conditions	Temperature range: 15 ~ 28°C; Humidity: <80% relative humidity. Recommended product should be used within one year from the time of delivery.

Environmental Test

Test Items	Specification	Test Conditions / Test Methods
High temperature Storage test	No case deformation or change in appearance. Δ L/L ≤10%	Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature.
Low temperature Storage test		Temperature -25 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature.
Humidity test		Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature.
Thermal shock test		First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature.

Mechanical Test

Test Items	Specification	Test Conditions / Test Methods
Solder Ability Test	Terminal area must have 90% minimum solder coverage.	Dip pads in flux then dip in solder pot (SnCuNi) at 245 ± 5°C for 3 seconds.
Resistance to Soldering Heat	No case deformation or change in appearance.	Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds.
Vibration test	No case deformation or change in appearance. Δ L/L ≤10%	Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours.
Shock resistance	No case deformation or change in appearance. Δ L/L ≤10%	Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations.

Reflow

The Condition Of Reflow (Recommendation):

Code

Files Download

Data Sheet

Shielded SMD Power Inductor - SCDS Series

SEARCH

Condition search: Cross Search

Best Sale

Shielded SMD Power Inductor (SCDS Series SCDS6D28NT7R3) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime Shielded SMD Power Inductor (SCDS Series SCDS6D28NT7R3) manufacturers since 1997. And their products are used throughout automotive, electronic device applications, with manufacturing tolerance down to 0.01% and TCR down to 2 ppm in a broad range of package sizes.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

Shielded SMD Power Inductor (SCDS Series SCDS6D28NT7R3) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.

View our quality products Power Inductor, Thin Film Chip Resistor, RF Inductor, Chip Resistor, current sense resistor, metal film, metal resistors, Thick film resistor, Chip Capacitor, Power Resistor and feel free to Contact Us.

Main Product

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Shielded SMD Power Inductor (SCDS Series SCDS6D28NT7R3) Manufacturers - Viking

Shielded SMD Power Inductor (SCDS Series SCDS6D28NT7R3)