Shielded SMD Power Inductor (PCDR Series PCDR1045MT181)

Shielded SMD Power Inductor (PCDR Series PCDR1045MT181) / Viking Tech has the experience in the design of innovative components, offering support and service to Global customers that demand a genuine manufacturing partner. Our goal is to be the leader in design, manufacturing, and marketing of miniature, precision passive components used throughout Automotive, Industrial and 3C electronic applications.

Shielded SMD Power Inductor (PCDR Series PCDR1045MT181)

Send Inquiry Add to List

PCDR1045MT181

Shielded SMD Power Inductor (PCDR Series PCDR1045MT181)
Shielded SMD Power Inductor (PCDR Series PCDR1045MT181) Files Download

Shielded SMD power inductor , compact , low profile with low DCR and large current , with magnetically shielded against rediation.
PCDR Series1045 ±20% 180μH 0.42 Ω 0.69A

SizeToleranceInductanceTest ConditionDCR (Ω) max.IDC (A)
1045±20%1801KHz, 0.5V0.420.69

Tape and Reel Specifications (Unit: mm)

Tape Reel Specifications - PCDR Series
Type Tape Size Parts Per Reel
W P 13"
PCDR0628 16 12 1000
PCDR0728 16 12 1000
PCDR0730 16 12 1000
PCDR0732 16 12 1000
PCDR0745 16 12 1000
PCDR1045 24 16 750
PCDR1255 24 16 500
PCDR1265 24 16 500
PCDR1275 24 16 350

SMD Power Inductor Environmental Specifications

General

Item Specification
Shelf Storage conditions Temperature range: 15 ~ 28°C; Humidity: < 80% relative humidity.
Recommended product should be used within 12 months from the time of delivery.

Environmental Test

Item Specification Test Conditions / Test Methods
High temperature Storage test No case deformation or change in appearance.
Δ L/L ≤10%		 Temperature 85 ± 2°C,
Time: 48 ± 2 hours,
Tested after 1hour at room temperature.
Low temperature Storage test Temperature -40 ± 2°C,
Time: 48 ± 2 hours,
Tested after 1hour at room temperature.
Humidity test Temperature 40 ± 2°C, 90 ~ 95% relative humidity
Time: 96 ± 2 hours
Tested after 1hour at room temperature.
Thermal shock test First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles.
Tested after 1 hour at room temperature.

Mechanical Test

Item Specification Test Conditions / Test Methods
Solderability test Terminal area must have 90% minimum solder coverage. Product with Lead-free terminal: Dip pads in flux then dip in solder pot at 245 ± 5°C for 3 seconds.
Resistance to Soldering Heat No case deformation or change in appearance. Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds.
Vibration test No case deformation or change in appearance.
Δ L/L ≤10%		 Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours.
Shock resistance Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations.

Reflow

The Condition Of Reflow (Recommendation):

The Condition Of Reflow

Code

  • 181
Files Download

SEARCH

Condition search:      Cross Search

Menu

Best Sale

Shielded SMD Power Inductor (PCDR Series PCDR1045MT181) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime Shielded SMD Power Inductor (PCDR Series PCDR1045MT181) manufacturers since 1997. And their products are used throughout automotive, electronic device applications, with manufacturing tolerance down to 0.01% and TCR down to 2 ppm in a broad range of package sizes.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

Shielded SMD Power Inductor (PCDR Series PCDR1045MT181) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.

Shielded SMD Power Inductor (PCDR Series PCDR1045MT181) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.

Main Product

AUTOMOTIVE APPLICATIONS

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

Read More
MEDICAL APPLICATIONS

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

Read More
COMMUNICATION APPLICATIONS

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Read More