SMD Power Inductor (PCD Series PCD0302KT390) Manufacturers

SMD Power Inductor (PCD Series PCD0302KT390)

PCD0302KT390

SMD Power Inductor (PCD Series PCD0302KT390) Files Download

SMD high power , high saturation inductor, silver plated type , low cost design , ideal inductors for DC-DC donverteres, various sizes from small size of 3.5*3 to 10*9mm.
PCD Series0302 ±10% 39μH 1.12 Ω 0.355A

Size	Tolerance	Inductance	Test Condition	DCR (Ω) max.	IDC (A)
0302	±10%	39	1KHz, 0.25V	1.12	0.355

Tape and Reel Specifications (Unit: mm)

Type	Tape Size		Parts Per Reel
Type	W	P	13"
PCD0301	12	8	3000
PCD0302	12	8	2000
PCD0403	12	8	1500
PCD0502	12	8	2000
PCD0503	12	8	1500
PCD0504	12	8	1500
PCD0703	16	12	1000
PCD0705	16	12	1000
PCD1004	24	12	1000
PCD1005	24	12	500
PCD1006	24	12	500

SMT Power Inductor Environmental Specifications

General

Item	Specification
Shelf Storage conditions	Temperature range: 15 ~ 28°C; Humidity: < 80% relative humidity. Recommended product should be used within one year from the time of delivery.

Environmental Test

Item	Specification	Test Conditions / Test Methods
High temperature Storage test	No case deformation or change in appearance. Δ L/L ≤10%	Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature.
Low temperature Storage test		Temperature -25 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature.
Humidity test		Temperature 40 ± 2°C, 90~95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature.
Thermal shock test		First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature.

Mechanical Test

Item	Specification	Test Conditions / Test Methods
Solderability test	Terminal area must have 90% minimum solder coverage.	Dip pads in flux then dip in solder pot (SnCuNi) at 245 ± 5°C for 3 seconds.
Resistance to Soldering Heat	No case deformation or change in appearance.	Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds.
Vibration test	No case deformation or change in appearance. Δ L/L ≤10%	Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours.
Shock resistance	No case deformation or change in appearance. Δ L/L ≤10%	Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations.

Reflow

The Condition Of Reflow (Recommendation):

Code

Files Download

Data Sheet
SMD Power Inductor - PCD Series

SEARCH

Condition search: Cross Search

Best Sale

SMD Power Inductor (PCD Series PCD0302KT390) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime SMD Power Inductor (PCD Series PCD0302KT390) manufacturers since 1997. And their products are used throughout automotive, electronic device applications, with manufacturing tolerance down to 0.01% and TCR down to 2 ppm in a broad range of package sizes.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

SMD Power Inductor (PCD Series PCD0302KT390) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.

View our quality products Power Inductor, Thin Film Chip Resistor, RF Inductor, Chip Resistor, current sense resistor, metal film, metal resistors, Thick film resistor, Chip Capacitor, Power Resistor and feel free to Contact Us.

Main Product

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

SMD Power Inductor (PCD Series PCD0302KT390) Manufacturers - Viking

SMD Power Inductor (PCD Series PCD0302KT390)