
AUTOMOTIVE APPLICATIONS
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreAutomotive Grade Thick Film Array Chip Resistor - CN..A Series
CN..A Series0201 Ā±1% 200 1/32W Series16.5KĪ© 10k/Reel
Size | Tolerance | TCR (ppm /ā) | Power | Resistance (Ohm) | Package |
---|---|---|---|---|---|
0201 | Ā±1% | 200 | 1/32W | 16.5K | 10k/Reel |
Item | Requirement | Test Method | ||||
---|---|---|---|---|---|---|
Ā± 1% | Ā± 5% | Jumper | ||||
Temperature Coefficient of Resistance (T.C.R.) | As Spec. | JIS-C-5201-1 4.8 IEC-60115-1 4.8 At 25Ā°C/-55Ā°C and 25Ā°C/ + 125Ā°C, 25Ā°C is the reference temperature |
||||
Short Time Overload | Ā± (1.0% + 0.05Ī©) | Ā± (2.0% + 0.05Ī©) | <50mĪ© | JIS-C-5201-1 4.13 IEC-60115-1 4.13 RCWV x 2.5 or Max. Overload Voltage whichever is lower for 5 seconds |
||
Insulation Resistance | Ā³10G | JIS-C-5201-1 4.6 IEC-60115-1 4.6 Max. Overload Voltage for 1 minute |
||||
Operational Life | Ā± (2.0% + 0.10Ī©) | Ā± (3.0% + 0.10Ī©) | <100mĪ© | MIL-STD-202 Method 108 Condition D Steady State TA=125Ā°C at derated power. Measurement at 24Ā±4 hours after test conclusion. |
||
Biased Humidity | Ā± (2.0% + 0.10Ī©) | Ā± (3.0% + 0.10Ī©) | <100mĪ© | MIL-STD-202 Method 103 1000 hrs 85Ā°C/85%RH 10% of operating power |
||
High Temperature Exposure | Ā± (1.0% + 0.05Ī©) | Ā± (1.5% + 0.10Ī©) CN-21/41: Ā± (3.0% + 0.10Ī©) |
<50mĪ© CN-21/41: <100mĪ© |
MIL-STD-202 Method 108 at + 155Ā°C for 1000 hrs |
||
Board Flex | Ā± (1.0% + 0.05Ī©) | Ā± (1.0% + 0.05Ī©) | <50mĪ© | AEC-Q200-005 Bending once for 60 seconds with 3mm |
||
Solderability | 95% min. coverage | JIS-C-5201-1 4.17 IEC-60115-1 4.17 J-STD-002 245Ā± 5Ā°C for 3 seconds |
||||
Resistance to Soldering Heat | Ā± (0.5% + 0.05Ī©) | Ā± (1.0% + 0.05Ī©) | <50mĪ© | MIL-STD-202 Method 210 260Ā± 5Ā°C for 10 seconds |
||
Voltage Proof | No breakdown or flashover | JIS-C-5201-1 4.7 IEC-60115-1 4.7 1.42 times Max. Operating Voltage for 1 minute |
||||
Leaching | Individual leaching area ā¦5% Total leaching area ā¦ 10% |
JIS-C-5201-1 4.18 IEC-60068-2-58 8.2.1 260Ā± 5Ā°C for 30 seconds |
||||
Temperature Cycling | Ā± (0.5% + 0.05Ī©) | Ā± (1.5% + 0.05Ī©) | <50mĪ© | JESD22 Method JA-104 -55Ā°C to + 125Ā°C, 1000 cycles |
||
Mechanical Shock | Ā± (0.25% + 0.05Ī©) | Ā± (1.0% + 0.05Ī©) | <50mĪ© | MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. |
||
Vibration | Ā± (0.5% + 0.05Ī©) | Ā± (1.0% + 0.05Ī©) | <50mĪ© | MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz |
||
ESD | Ā± (1% + 0.05Ī©) | AEC-Q200-002 Human body, 2KV |
||||
Resistance to Solvents | No visible damage on appearance and marking. | MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. |
||||
Terminal Strength | No broken | AEC-Q200-006 Force of 1.8kg for 60 seconds. |
||||
Flammability | No ignition of the tissue paper or scorching or the pinewood board | UL-94 V-0 or V-1 are acceptable. Electrical test not required. |
||||
Sulfur Test | Ā± RĀ± 5% | <100mĪ© | EIA-977 (Condition A) 60Ā± 2Ā°C, no power rating for 480 hrs. |
RCWV (Rated Continuous Working Voltage)=ā(P x R) or Max. Operating Voltage whichever is lower.
ā Storage Temperature: 15~28Ā°C; Humidity < 80%RH
No Marking for CN-21 / CN-41
Jumper for all: Letter "0"
1% for CN-42 / CN-43: 4 digits marking (non-including E24 series)
Example:
Resistance | 102Ī© | 2.49KĪ© | 30K1Ī© | 49.9KĪ© | 121KĪ© |
---|---|---|---|---|---|
marking | 1020 | 2491 | 3012 | 4992 | 1213 |
5% for CN-42 / CN-43: 3 digits marking in E24
Example: 101=100Ī© 102=1KĪ© (1st and 2nd are E24 code and 3rd code is multiplier)
E24 code |
10 | 11 | 12 | 13 | 15 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 43 | 47 | 51 | 56 | 62 | 68 | 75 | 82 | 91 |
Reel Specifications & Packaging Quantity
Type | Packaging Quantity | Tape Width | Reel Diameter | Ī¦A (mm) |
Ī¦B (mm) |
Ī¦C (mm) |
W (mm) |
T (mm) |
|
---|---|---|---|---|---|---|---|---|---|
CN-21 CN-41 |
Paper | 10K | 8mm | 7 inch | 178.5 Ā± 1.5 | 60 + 1/-0 | 13.0 Ā± 0.2 | 9.0 Ā± 0.5 | 12.5 Ā± 0.5 |
CN-42 | Paper | 10K | 8mm | 7 inch | 178.5 Ā± 1.5 | 60 + 1/-0 | 13.0 Ā± 0.2 | 9.0 Ā± 0.5 | 12.5 Ā± 0.5 |
20K | 8mm | 10 inch | 254 Ā± 1.0 | 100 Ā± 0.5 | 13.0 Ā± 0.2 | 9.5 Ā± 0.5 | 13.5 Ā± 0.5 | ||
40K | 8mm | 13 inch | 330 Ā± 1.0 | 100 Ā± 0.5 | 13.0 Ā± 0.2 | 9.5 Ā± 0.5 | 13.5 Ā± 0.5 | ||
CN-43 | Paper | 5K | 8mm | 7 inch | 178.5 Ā± 1.5 | 60 + 1/-0 | 13.0 Ā± 0.2 | 9.0 Ā± 0.5 | 12.5 Ā± 0.5 |
10K | 8mm | 10 inch | 254 Ā± 1.0 | 100 Ā± 0.5 | 13.0 Ā± 0.2 | 9.5 Ā± 0.5 | 13.5 Ā± 0.5 | ||
20K | 8mm | 13 inch | 330 Ā± 1.0 | 100 Ā± 0.5 | 13.0 Ā± 0.2 | 9.5 Ā± 0.5 | 13.5 Ā± 0.5 |
Paper Tape Specifications
Type | A (mm) |
B (mm) |
W (mm) |
E (mm) |
F (mm) |
P0 (mm) |
P1 (mm) |
P2 (mm) |
Ī¦D0 (mm) |
T (mm) |
---|---|---|---|---|---|---|---|---|---|---|
CN-21 | 0.77 Ā± 0.05 | 0.97 Ā± 0.05 | 8.0 Ā± 0.2 | 1.75 Ā± 0.1 | 3.5 Ā± 0.05 | 4.0 Ā± 0.1 | 2.0 Ā± 0.05 | 2.0 Ā± 0.05 | 1.50 + 0.1, -0 | 0.50 Ā± 0.1 |
CN-41 | 0.77 Ā± 0.05 | 1.57 Ā± 0.05 | 8.0 Ā± 0.2 | 1.75 Ā± 0.1 | 3.5 Ā± 0.05 | 4.0 Ā± 0.1 | 2.0 Ā± 0.05 | 2.0 Ā± 0.05 | 1.50 + 0.1, -0 | 0.50 Ā± 0.1 |
CN-42 | 1.20 Ā± 0.1 | 2.20 Ā± 0.1 | 8.0 Ā± 0.2 | 1.75 Ā± 0.1 | 3.5 Ā± 0.05 | 4.0 Ā± 0.1 | 2.0 Ā± 0.05 | 2.0 Ā± 0.05 | 1.50 + 0.1, -0 | 0.70 Ā± 0.1 |
CN-43 | 1.95 Ā± 0.1 | 3.50 Ā± 0.1 | 8.0 Ā± 0.2 | 1.75 Ā± 0.1 | 3.5 Ā± 0.05 | 4.0 Ā± 0.1 | 4.0 Ā± 0.05 | 2.0 Ā± 0.05 | 1.50 + 0.1, -0 | 0.85 Ā± 0.1 |
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreCeramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...
Read MoreMultilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...
Read More