Automotive Grade Anti Sulfurated Chip Resistor (AS..A Series (Chip) AS0AFTET5111A) Manufacturers

Automotive Grade Anti Sulfurated Chip Resistor (AS..A Series (Chip) AS0AFTET5111A)

Send Inquiry Add to List

AS0AFTET5111A

Automotive Grade Anti Sulfurated Chip Resistor (AS..A Series (Chip) AS0AFTET5111A) Files Download

Automotive Grade Anti Sulfurated Chip Resistor - AS..A Series (Chip)
AS..A (Chip) Series2010 ±1% 100 1W Series5.11KΩ 4K/Reel

Size	Tolerance	TCR (ppm /℃)	Power	Resistance (Ohm)	Package
2010	±1%	100	1W	5.11K	4K/Reel

Environmental Characteristics

Item	Requirement			Test Method
Item	1% and Below	5%	Jumper	Test Method
Temperature Coefficient of Resistance (T.C.R.)	As Spec.			JIS C 5201-1 4.8 IEC 60115-1 4.8 At 25°C/-55°C and 25°C/ + 125°C, 25°C is the reference temperature
Short Time Overload	± (1.0% + 0.05Ω)	± (2.0% + 0.05Ω)	<50mΩ	JIS C 5201-1 4.13 IEC 60115-1 4.13 2.5 times RCWV or Max. Overload Voltage whichever is lower for 5 seconds
Insulation Resistance	≧10G			JIS C 5201-1 4.6 IEC 60115-1 4.6 Max. Overload Voltage for 1 minute
Operational Life	± (2.0% + 0.10Ω)	± (3.0% + 0.10Ω)	<100mΩ	MIL-STD-202 Method 108 Condition D Steady State TA=125°C at derated power. Measurement at 24±4 hours after test conclusion.
Biased Humidity	± (2.0% + 0.10Ω)	± (3.0% + 0.10Ω)	<100mΩ	MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power.
High Temperature Exposure	± (1.0% + 0.05Ω)	± (1.5% + 0.10Ω)	<50mΩ	MIL-STD-202 Method 108 at + 155°C for 1000 hrs
Board Flex	± (1.0% + 0.05Ω)	± (1.0% + 0.05Ω)	<50mΩ	AEC-Q200-005 Bending once for 60 seconds 2010, 2512 sizes: 2mm Other sizes: 3mm
Solderability	>95% coverage			JIS C 5201-1 4.17 IEC 60115-1 4.17 J-STD-002 245± 5°C for 3 seconds
Resistance to Soldering Heat	± (0.5% + 0.05Ω)	± (1.0% + 0.05Ω)	<50mΩ	MIL-STD-202 Method 210 260± 5°C for 10 seconds
Voltage Proof	No breakdown or flashover			JIS C 5201-1 4.7 IEC 60115-1 4.7 1.42 times Max. Operating Voltage for 1 minute
Leaching	Individual leaching area ≦5% Total leaching area ≦10%			JIS C 5201-1 4.18 IEC 60068-2-58 8.2.1 260± 5°C for 30 seconds
Temperature Cycling	± (0.5% + 0.05Ω)	± (1.5% + 0.05Ω)	<50mΩ	JESD22 Method JA-104 -55°C to + 125°C, 1000 cycles
Mechanical Shock	± (0.25% + 0.05Ω)	± (1.0% + 0.05Ω)	<50mΩ	MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6.
Vibration	± (0.5% + 0.05Ω)	± (1.0% + 0.05Ω)	<50mΩ	MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz
ESD	± (3% + 0.05Ω)			AEC-Q200-002 Human body model 0201: 0.5KV 0402/0603: 1KV 0805 and above: 2KV
Resistance to Solvents	No visible damage on appearance and marking.			MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents.
Terminal Strength	No broken			AEC-Q200-006 Force of 1.8kg for 60 seconds.
Flammability	No ignition of the tissue paper or scorching or the pinewood board			UL-94 V-0 or V-1 are acceptable. Electrical test not required.
Sulfur Test	△R± 0.5%		<50mΩ	EIA-977 105± 2°C, no power rating for 750 hrs.

RCWV (Rated Continuous Working Voltage) = √(P x R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH

Soldering Condition

Marking

No Marking for 0201/ 0402
Jumper for all: Letter "0"
1% for 0805 / 1206 / 1210 / 2010 / 2512: 4 digits marking

Example:

Resistance	100Ω	2.2KΩ	10KΩ	49.9KΩ	100KΩ
Marking	1000	2201	1002	4992	1003

5% for 0603 / 0805 / 1206 / 1210 / 2010 / 2512: 3 digits marking in E24
Example: 101=100Ω 102=1KΩ (1^st and 2^nd are E24 code and 3^rd code is multiplier)

E24 code

1% for 0603: 3 digits marking in E96

Marking Table

Code	E96		Code	E96		Code	E96		Code	E96
01	100		25	178		49	316		73	562
02	102		26	182		50	324		74	576
03	105		27	187		51	332		75	590
04	107		28	191		52	340		76	604
05	110		29	196		53	348		77	619
06	113		30	200		54	357		78	634
07	115		31	205		55	365		79	649
08	118		32	210		56	374		80	665
09	121		33	215		57	383		81	681
10	124		34	221		58	392		82	698
11	127		35	226		59	402		83	715
12	130		36	232		60	412		84	732
13	133		37	237		61	422		85	750
14	137		38	243		62	432		86	768
15	140		39	249		63	442		87	787
16	143		40	255		64	453		88	806
17	147		41	261		65	464		89	825
18	150		42	267		66	475		90	845
19	154		43	274		67	487		91	866
20	158		44	280		68	499		92	887
21	162		45	287		69	511		93	909
22	165		46	294		70	523		94	931
23	169		47	301		71	536		95	953
24	174		48	309		72	549		96	976
Code	A	B	C	D	E	F	G	X	Y
Multiplier	10⁰	10¹	10²	10³	10⁴	10⁵	10⁶	10^-1	10^-2

Packaging

Packing Quantity & Reel Specifications

Type	Packaging Quantity	Tape Width	Reel Diameter	ΦA (mm)	ΦB (mm)	ΦC (mm)	W (mm)	T (mm)
AS01 AS02	Paper	10K	8mm	7 inch	178.5±1.5	60+1/-0	13.0±0.2	9.0±0.5	12.5±0.5
		20K	8mm	10 inch	254±1.0	100±0.5	13.0±0.2	9.5±0.5	13.5±0.5
		40K	8mm	13 inch	330±1.0	100±0.5	13.0±0.2	9.5±0.5	13.5±0.5
AS03 AS05 AS06 AS10	Paper	5K	8mm	7 inch	178.5±1.5	60+1/-0	13.0±0.2	9.0±0.5	12.5±0.5
		10K	8mm	10 inch	254±1.0	100±0.5	13.0±0.2	9.5±0.5	13.5±0.5
		20K	8mm	13 inch	330±1.0	100±0.5	13.0±0.2	9.5±0.5	13.5±0.5
AS0A AS12	Embossed	4K	12mm	7 inch	178.5±1.5	60+1/-0	13.0±0.5	13.0±0.5	15.5±0.5
AS0A AS12	Embossed	8K	12mm	10 inch	250±1.0	62±0.5	13.0±0.5	12.5±0.5	16.5±0.5

Paper Tape Specifications

Type	A (mm)	B (mm)	W (mm)	E (mm)	F (mm)	P0 (mm)	P1 (mm)	P2 (mm)	ΦD0 (mm)	T (mm)
AS01	0.38 ± 0.05	0.68 ± 0.05	8.0 ± 0.20	1.75 ± 0.10	3.50 ± 0.05	4.00 ± 0.10	2.00 ± 0.05	2.00 ± 0.05	1.50 + 0.1,-0	0.42 ± 0.20
AS02	0.65 ± 0.10	1.15 ± 0.10	8.0 ± 0.20	1.75 ± 0.10	3.50 ± 0.05	4.00 ± 0.10	2.00 ± 0.05	2.00 ± 0.05	1.50 + 0.1,-0	0.45 ± 0.10
AS03	1.10 ± 0.10	1.90 ± 0.10	8.0 ± 0.20	1.75 ± 0.10	3.50 ± 0.05	4.00 ± 0.10	4.00 ± 0.05	2.00 ± 0.05	1.50 + 0.1,-0	0.70 ± 0.10
AS05	1.60 ± 0.10	2.40 ± 0.20	8.0 ± 0.20	1.75 ± 0.10	3.50 ± 0.05	4.00 ± 0.10	4.00 ± 0.05	2.00 ± 0.05	1.50 + 0.1,-0	0.85 ± 0.10
AS06	1.90 ± 0.10	3.50 ± 0.20	8.0 ± 0.20	1.75 ± 0.10	3.50 ± 0.05	4.00 ± 0.10	4.00 ± 0.05	2.00 ± 0.05	1.50 + 0.1,-0	0.85 ± 0.10
AS10	2.90 ± 0.10	3.50 ± 0.20	8.0 ± 0.20	1.75 ± 0.10	3.50 ± 0.05	4.00 ± 0.10	4.00 ± 0.05	2.00 ± 0.05	1.50 + 0.1,-0	0.85 ± 0.10

Embossed Plastic Tape Specifications

Type	A (mm)	B (mm)	W (mm)	E (mm)	F (mm)	P0 (mm)	P1 (mm)	P2 (mm)	ΦD0 (mm)	T (mm)
AS0A	2.8 ± 0.10	5.40 ± 0.20	12.0 ± 0.30	1.75 ± 0.10	5.5 ± 0.05	4.00 ± 0.10	4.00 ± 0.10	2.00 ± 0.05	1.50 + 0.1, -0	1.2⁺⁰
AS12	3.5 ± 0.10	6.7 ± 0.10	12.0 ± 0.30	1.75 ± 0.10	5.5 ± 0.05	4.00 ± 0.10	4.00 ± 0.10	2.00 ± 0.05	1.50 + 0.1, -0	1.2⁺⁰

Code

5111

Files Download

Data Sheet

Automotive Grade Anti Sulfurated Chip Resistor - AS..A Series (Chip)

Tag
metal resistors

SEARCH

Condition search: Cross Search

Best Sale

Automotive Grade Anti Sulfurated Chip Resistor (AS..A Series (Chip) AS0AFTET5111A) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime Automotive Grade Anti Sulfurated Chip Resistor (AS..A Series (Chip) AS0AFTET5111A) manufacturers since 1997. And their products are used throughout automotive, electronic device applications, with manufacturing tolerance down to 0.01% and TCR down to 2 ppm in a broad range of package sizes.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

Automotive Grade Anti Sulfurated Chip Resistor (AS..A Series (Chip) AS0AFTET5111A) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.

View our quality products Power Inductor, Thin Film Chip Resistor, RF Inductor, Chip Resistor, current sense resistor, metal film, metal resistors, Thick film resistor, Chip Capacitor, Power Resistor and feel free to Contact Us.

Main Product

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

Automotive Grade Anti Sulfurated Chip Resistor (AS..A Series (Chip) AS0AFTET5111A) Manufacturers - Viking

Automotive Grade Anti Sulfurated Chip Resistor (AS..A Series (Chip) AS0AFTET5111A)