![AUTOMOTIVE APPLICATIONS](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
AUTOMOTIVE APPLICATIONS
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreAutomotive Grade Professional Thin Film Chip Resistor - ART..A Series
ART..A Series0402 ±0.5% 25 1/10W Series34KΩ 10K/Reel
Size | Tolerance | TCR (ppm /℃) | Power | Resistance (Ohm) | Package |
---|---|---|---|---|---|
0402 | ±0.5% | 25 | 1/10W | 34K | 10K/Reel |
Item | Requirement | Test Method | |
---|---|---|---|
Temperature Coefficient of Resistance (T.C.R.) | As Spec. | MIL-STD-202 Method 304 +25/-55/+25/+125/+25°C |
|
Short Time Overload(Standard operation mode | Δ R± 0.10% | JIS-C-5201-1 4.13 RCWV x 2.5 or Max. overload voltage whichever is lower for 5 seconds |
|
Short Time Overload(Power operation mode | Δ R± 0.25% | ||
Insulation Resistance | >1000 MΩ | MIL-STD-202 Method 302 Apply 100VDC for 1 minute |
|
Endurance | Standard at 70°C, 1000hrs, Δ R± 0.15% | MIL-STD-202 Method 108 RCWV with 1.5 hrs ON and 0.5 hrs OFF |
|
Standard at 70°C, 8000hrs, Δ R± 0.25% | |||
Power at 70°C, 1000hrs, Δ R± 0.3% | |||
Power at 70°C, 8000hrs, Δ R± 0.5% | |||
Advanced temperature at 85°C, 1000hrs, Δ R± 0.5% | |||
High Temperature Exposure | 125°C , Δ R± 0.15% | EN 60115-1 CLAUSE 4.25.3 1000 hrs |
|
155°C , Δ R± 0.3% | |||
175°C , Δ R± 0.5% | |||
Temperature Cycling | Δ R± 0.25% | JESD22 Method JA-104 -55°C to +155°C, 1000 cycles |
|
Biased Humidity | Standard operation mode Δ R± 0.5% |
MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power(≦100V) |
|
Bending Strength (Board Flex) | Δ R± 0.1% | JIS-C-5201-1 4.33 Bending once for 60 seconds. Bending displacement 0402 0603 0805 1206 size: 3mm |
|
Solderability | 95% min. coverage | JIS-C-5201-1 4.17 IEC-60115-1 4.17 245± 5°C for 3 seconds |
|
Resistance to Soldering Heat | Δ R± 0.1% | JIS-C-5201-1 4.18 IEC-60115-1 4.18 260± 5°C for 10 seconds |
|
Terminal strength | No broken | AEC-Q200-006 0402 0603: Force of 1.8kg for 60 seconds. Others: Force of 1.8kg for 60 seconds. |
|
Mechanical Shock | Δ R± 0.1% | MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6. |
|
Vibration | Δ R± 0.1% | MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz |
|
ESD | Δ R± 0.5% | AEC-Q200-002 Human body model 0402 0.2KV;0603 0.5KV; 0805 1.5KV; 1206 2.0KV |
|
Resistance to solvents | Marking Unsmeared | MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. |
|
Flammability | No ignition of the tissue paper or scorching or the pinewood board | UL-94 V-0 or V-1 are acceptable. Electrical test not required. |
|
External Visual | No visible damage. | MIL-STD-883 Method 2009 Electrical test not required. Inspect device construction, marking and workmanship. |
|
Physical Dimension | As Spec | JESD22 Method JB-100 Verify physical dimensions to the applicable device detail specification. Note: User(s) and Suppliers Specification. Electrical test not required. |
RCWV (Rated continuous working voltage)= √(P x R) or Max. Operating voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH
☑ Shelf Life: 2 years from production date.
Marking Table
Code | E96 | Code | E96 | Code | E96 | Code | E96 | ||||
---|---|---|---|---|---|---|---|---|---|---|---|
01 | 100 | 25 | 178 | 49 | 316 | 73 | 562 | ||||
02 | 102 | 26 | 182 | 50 | 324 | 74 | 576 | ||||
03 | 105 | 27 | 187 | 51 | 332 | 75 | 590 | ||||
04 | 107 | 28 | 191 | 52 | 340 | 76 | 604 | ||||
05 | 110 | 29 | 196 | 53 | 348 | 77 | 619 | ||||
06 | 113 | 30 | 200 | 54 | 357 | 78 | 634 | ||||
07 | 115 | 31 | 205 | 55 | 365 | 79 | 649 | ||||
08 | 118 | 32 | 210 | 56 | 374 | 80 | 665 | ||||
09 | 121 | 33 | 215 | 57 | 383 | 81 | 681 | ||||
10 | 124 | 34 | 221 | 58 | 392 | 82 | 698 | ||||
11 | 127 | 35 | 226 | 59 | 402 | 83 | 715 | ||||
12 | 130 | 36 | 232 | 60 | 412 | 84 | 732 | ||||
13 | 133 | 37 | 237 | 61 | 422 | 85 | 750 | ||||
14 | 137 | 38 | 243 | 62 | 432 | 86 | 768 | ||||
15 | 140 | 39 | 249 | 63 | 442 | 87 | 787 | ||||
16 | 143 | 40 | 255 | 64 | 453 | 88 | 806 | ||||
17 | 147 | 41 | 261 | 65 | 464 | 89 | 825 | ||||
18 | 150 | 42 | 267 | 66 | 475 | 90 | 845 | ||||
19 | 154 | 43 | 274 | 67 | 487 | 91 | 866 | ||||
20 | 158 | 44 | 280 | 68 | 499 | 92 | 887 | ||||
21 | 162 | 45 | 287 | 69 | 511 | 93 | 909 | ||||
22 | 165 | 46 | 294 | 70 | 523 | 94 | 931 | ||||
23 | 169 | 47 | 301 | 71 | 536 | 95 | 953 | ||||
24 | 174 | 48 | 309 |
72 | 549 | 96 | 976 |
Code | A | B | C | D | E | F | G | H | X | Y | Z |
---|---|---|---|---|---|---|---|---|---|---|---|
Multiplier | 10s0 | 101 | 102 | 103 | 104 | 105 | 106 | 107 | 10-1 | 10-2 | 10-3 |
0603 3digit marking for E24
Example: 101=100Ω 102=1KΩ
E24 | 10 | 11 | 12 | 13 | 15 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 43 | 47 | 51 | 56 | 62 | 68 | 75 | 82 | 91 |
Packing Quantity & Reel Specifications (Unit :mm)
Type | ØA | ØB | ØC | W | T | Paper Type(EA) | Emboss Plastic Tape(EA) | ![]() |
---|---|---|---|---|---|---|---|---|
ART02 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 10,000 | - | |
ART03 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - | |
ART05 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - | |
ART06 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - |
Paper Tape Specifications
Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ØD0 (mm) | T (mm) |
---|---|---|---|---|---|---|---|---|---|---|
ART02 | 0.70 ± 0.05 | 1.16 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 2.00 ± 0.05 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.40 ± 0.03 |
ART03 | 1.10 ± 0.05 | 1.90 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.60 ± 0.03 |
ART05 | 1.60 ± 0.05 | 2.37 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.75 ± 0.05 |
ART06 | 2.00 ± 0.05 | 3.55 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.5 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 2.00 ± 0.10 | 1.55 ± 0.05 | 0.75 ± 0.05 |
■ Peel force of top cover tape.
■ The peel speed shall be about 300mm/min ± 5%.
■ The peel force of top cover tape shall be between 8gf to 60gf.
Type | A | B | W | E | F | P0 | P1 | P2 | ΦD0 | T |
---|---|---|---|---|---|---|---|---|---|---|
ART03 | 1.10±0.05 | 1.90±0.05 | 8.00±0.10 | 1.75±0.05 | 3.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.55±0.05 | 0.60±0.03 |
☑ Peel force of top cover tape
☑ The peel speed shall be about 300mm/min±5%
☑ The peel force of top cover tape shall be between 8gf to 60gf
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreCeramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...
Read MoreMultilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...
Read More