AUTOMOTIVE GRADE PROFESSIONAL THIN FILM CHIP RESISTOR (ART..A Series ART02BTD6491A) Manufacturers

AUTOMOTIVE GRADE PROFESSIONAL THIN FILM CHIP RESISTOR (ART..A Series ART02BTD6491A)

ART02BTD6491A

AUTOMOTIVE GRADE PROFESSIONAL THIN FILM CHIP RESISTOR (ART..A Series ART02BTD6491A) Files Download

Automotive Grade Professional Thin Film Chip Resistor - ART..A Series
ART..A Series0402 ±0.1% 50 1/10W Series6.49KΩ 10K/Reel

Size	Tolerance	TCR (ppm /℃)	Power	Resistance (Ohm)	Package
0402	±0.1%	50	1/10W	6.49K	10K/Reel

Environmental Characteristics

Item	Requirement	Test Method
Temperature Coefficient of Resistance (T.C.R.)	As Spec.	MIL-STD-202 Method 304 +25/-55/+25/+125/+25°C
Short Time Overload(Standard operation mode	Δ R± 0.10%	JIS-C-5201-1 4.13 RCWV x 2.5 or Max. overload voltage whichever is lower for 5 seconds
Short Time Overload(Power operation mode	Δ R± 0.25%
Insulation Resistance	>1000 MΩ	MIL-STD-202 Method 302 Apply 100VDC for 1 minute
Endurance	Standard at 70°C, 1000hrs, Δ R± 0.15%	MIL-STD-202 Method 108 RCWV with 1.5 hrs ON and 0.5 hrs OFF
	Standard at 70°C, 8000hrs, Δ R± 0.25%
	Power at 70°C, 1000hrs, Δ R± 0.3%
	Power at 70°C, 8000hrs, Δ R± 0.5%
	Advanced temperature at 85°C, 1000hrs, Δ R± 0.5%
High Temperature Exposure	125°C , Δ R± 0.15%	EN 60115-1 CLAUSE 4.25.3 1000 hrs
	155°C , Δ R± 0.3%
	175°C , Δ R± 0.5%
Temperature Cycling	Δ R± 0.25%	JESD22 Method JA-104 -55°C to +155°C, 1000 cycles
Biased Humidity	Standard operation mode Δ R± 0.5%	MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power(≦100V)
Bending Strength (Board Flex)	Δ R± 0.1%	JIS-C-5201-1 4.33 Bending once for 60 seconds. Bending displacement 0402 0603 0805 1206 size: 3mm
Solderability	95% min. coverage	JIS-C-5201-1 4.17 IEC-60115-1 4.17 245± 5°C for 3 seconds
Resistance to Soldering Heat	Δ R± 0.1%	JIS-C-5201-1 4.18 IEC-60115-1 4.18 260± 5°C for 10 seconds
Terminal strength	No broken	AEC-Q200-006 0402 0603: Force of 1.8kg for 60 seconds. Others: Force of 1.8kg for 60 seconds.
Mechanical Shock	Δ R± 0.1%	MIL-STD-202 Method 213 Wave Form: Tolerance for half sine shock pulse. Peak value is 100g's. Normal duration (D) is 6.
Vibration	Δ R± 0.1%	MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz
ESD	Δ R± 0.5%	AEC-Q200-002 Human body model 0402 0.2KV;0603 0.5KV; 0805 1.5KV; 1206 2.0KV
Resistance to solvents	Marking Unsmeared	MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents.
Flammability	No ignition of the tissue paper or scorching or the pinewood board	UL-94 V-0 or V-1 are acceptable. Electrical test not required.
External Visual	No visible damage.	MIL-STD-883 Method 2009 Electrical test not required. Inspect device construction, marking and workmanship.
Physical Dimension	As Spec	JESD22 Method JB-100 Verify physical dimensions to the applicable device detail specification. Note: User(s) and Suppliers Specification. Electrical test not required.

RCWV (Rated continuous working voltage)= √(P x R) or Max. Operating voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH
☑ Shelf Life: 2 years from production date.

Soldering Condition

Marking

Marking Table

Code	E96	Code	E96	Code	E96	Code	E96
01	100	25	178	49	316	73	562
02	102	26	182	50	324	74	576
03	105	27	187	51	332	75	590
04	107	28	191	52	340	76	604
05	110	29	196	53	348	77	619
06	113	30	200	54	357	78	634
07	115	31	205	55	365	79	649
08	118	32	210	56	374	80	665
09	121	33	215	57	383	81	681
10	124	34	221	58	392	82	698
11	127	35	226	59	402	83	715
12	130	36	232	60	412	84	732
13	133	37	237	61	422	85	750
14	137	38	243	62	432	86	768
15	140	39	249	63	442	87	787
16	143	40	255	64	453	88	806
17	147	41	261	65	464	89	825
18	150	42	267	66	475	90	845
19	154	43	274	67	487	91	866
20	158	44	280	68	499	92	887
21	162	45	287	69	511	93	909
22	165	46	294	70	523	94	931
23	169	47	301	71	536	95	953
24	174	48	309	72	549	96	976

Code	A	B	C	D	E	F	G	H	X	Y	Z
Multiplier	10s⁰	10¹	10²	10³	10⁴	10⁵	10⁶	10⁷	10^-1	10^-2	10^-3

0603 3digit marking for E24
Example: 101=100Ω 102=1KΩ

E24

Packaging

Packing Quantity & Reel Specifications (Unit :mm)

Type	ØA	ØB	ØC	W	T	Paper Type(EA)	Emboss Plastic Tape(EA)
ART02	178.0±1.0	60.0+1.0	13.5±0.7	9.5±1.0	11.5±1.0	10,000	-
ART03	178.0±1.0	60.0+1.0	13.5±0.7	9.5±1.0	11.5±1.0	5,000	-
ART05	178.0±1.0	60.0+1.0	13.5±0.7	9.5±1.0	11.5±1.0	5,000	-
ART06	178.0±1.0	60.0+1.0	13.5±0.7	9.5±1.0	11.5±1.0	5,000	-

Paper Tape Specifications

Type	A (mm)	B (mm)	W (mm)	E (mm)	F (mm)	P0 (mm)	P1 (mm)	P2 (mm)	ØD0 (mm)	T (mm)
ART02	0.70 ± 0.05	1.16 ± 0.05	8.00 ± 0.10	1.75 ± 0.05	3.5 ± 0.05	4.00 ± 0.10	2.00 ± 0.05	2.00 ± 0.05	1.55 ± 0.05	0.40 ± 0.03
ART03	1.10 ± 0.05	1.90 ± 0.05	8.00 ± 0.10	1.75 ± 0.05	3.5 ± 0.05	4.00 ± 0.10	4.00 ± 0.10	2.00 ± 0.05	1.55 ± 0.05	0.60 ± 0.03
ART05	1.60 ± 0.05	2.37 ± 0.05	8.00 ± 0.10	1.75 ± 0.05	3.5 ± 0.05	4.00 ± 0.10	4.00 ± 0.10	2.00 ± 0.05	1.55 ± 0.05	0.75 ± 0.05
ART06	2.00 ± 0.05	3.55 ± 0.05	8.00 ± 0.10	1.75 ± 0.05	3.5 ± 0.05	4.00 ± 0.10	4.00 ± 0.10	2.00 ± 0.10	1.55 ± 0.05	0.75 ± 0.05

■ Peel force of top cover tape.
■ The peel speed shall be about 300mm/min ± 5%.
■ The peel force of top cover tape shall be between 8gf to 60gf.

Type	A	B	W	E	F	P0	P1	P2	ΦD₀	T
ART03	1.10±0.05	1.90±0.05	8.00±0.10	1.75±0.05	3.5±0.05	4.00±0.10	4.00±0.10	2.00±0.05	1.55±0.05	0.60±0.03

☑ Peel force of top cover tape
☑ The peel speed shall be about 300mm/min±5%
☑ The peel force of top cover tape shall be between 8gf to 60gf

Code

491A

Files Download

ART..A_Series.pdf

Tag
metal resistors

SEARCH

Condition search: Cross Search

Best Sale

AUTOMOTIVE GRADE PROFESSIONAL THIN FILM CHIP RESISTOR (ART..A Series ART02BTD6491A) Manufacturer - Viking

Based in Taiwan, Viking Tech Corporation is one of the prime AUTOMOTIVE GRADE PROFESSIONAL THIN FILM CHIP RESISTOR (ART..A Series ART02BTD6491A) manufacturers since 1997. And their products are used throughout automotive, electronic device applications, with manufacturing tolerance down to 0.01% and TCR down to 2 ppm in a broad range of package sizes.

TS16949/ ISO9001/ ISO14001 and meet AEC-Q200 standards, Viking has been offering anti-sulfur, anti-surge, pulse, high voltage, high power precision resistors including thin/ thick film resistors, automotive resistors, melf resistors, current sense resistors, etc. Low noise, low TC, high power inductors such as rf inductors, chip inductors, power inductors, variable inductors, ferrite chip inductors, shielded inductors, wire wound inductors and dip inductors.

AUTOMOTIVE GRADE PROFESSIONAL THIN FILM CHIP RESISTOR (ART..A Series ART02BTD6491A) has been offering customers high quality power resistors, power inductors and aluminum electrolytic capacitors with solid reputation. Both with advanced technology and 25 years of experience, Viking makes sure to meet each customer's demands.

View our quality products Power Inductor, Thin Film Chip Resistor, RF Inductor, Chip Resistor, current sense resistor, metal film, metal resistors, Thick film resistor, Chip Capacitor, Power Resistor and feel free to Contact Us.

Main Product

AUTOMOTIVE APPLICATIONS

Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...

MEDICAL APPLICATIONS

Ceramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...

COMMUNICATION APPLICATIONS

Multilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...

AUTOMOTIVE GRADE PROFESSIONAL THIN FILM CHIP RESISTOR (ART..A Series ART02BTD6491A) Manufacturers - Viking

AUTOMOTIVE GRADE PROFESSIONAL THIN FILM CHIP RESISTOR (ART..A Series ART02BTD6491A)