AUTOMOTIVE APPLICATIONS
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreAutmotive Grade High Voltage Thin Film Flat Chip Resistor - ARHV..A Series
ARHV..A Series0805 ±0.10% 50 1/5W Series332KΩ 5K/Reel 450VV 900VV
Size | Tolerance | TCR (ppm /℃) | Power | Resistance (Ohm) | Package | Max Operation Voltage | Max Overload Voltage |
---|---|---|---|---|---|---|---|
0805 | ±0.10% | 50 | 1/5W | 332K | 5K/Reel | 450V | 900V |
Item | Requirement | Test Method |
---|---|---|
Temperature Coefficient of Resistance (T.C.R.) | As Spec. | JIS-C-5201-1 4.8 IEC-60115-1 4.8 -55℃ ~+125℃, 25℃ is the reference temperature |
Short Time Overload | Δ R± 0.05% | JIS-C-5201-1 4.13 U=2*√(P*R) or Max. overload voltage whichever is lower for 5 seconds |
Endurance | Δ R± 0.1% | MIL-STD-202 Method 108 U=√(P*R) 1.5 hrs ON and 0.5 hrs OFF, 70℃, 1000 hrs |
Damp Heat with Load | Δ R± 0.1% | MIL-STD-202 Method 103 U=0.1*√(P*R) 40±2℃,90~95%RH 1000 hrs with 1.5 hrs ON and 0.5 hrs OFF |
Baiased Humidity | Δ R± 0.25% | MIL-STD-202 Method 103 U=0.3*√(P*R) 1000 hrs 85℃/85%RH Voltage isn’t exceeding 100V |
Temperature Cycling | Δ R± 0.1% | JESD22 Method JA-104 -55℃~+125℃, 1000 cycles |
High Temperature Exposure | Δ R± 0.2% | MIL-STD-202 Method 108 at +155℃ for 1000 hrs |
Single pulse high voltage overload | Δ R± 0.1% | IEC61000-4-5 U=2*√(P*R) 10 pulses 10us / 700us |
Periodic electric overload | Δ R± 0.1% | IEC 90115-1 4.39 U=2*√(P*R) 0.1s on, 2.5s off, 1000 cycles |
Bending Strength (Board Flex) | Δ R± 0.05% | JIS-C-5201-1 4.33 Bending amplitude 3mm for 60 seconds |
Solderability | 95% min. coverage | JIS-C-5201-1 4.17 IEC-60115-1 4.17 245± 5°C for 3 seconds |
Resistance to Soldering Heat | Δ R± 0.02% | JIS-C-5201-1 4.18 IEC-60115-1 4.18 260± 5°C for 10 seconds |
Terminal strength | No broken | AEC-Q200-006 Force of 1.8kg for 60 seconds. |
Vibration | Δ R± 0.05% | MIL-STD-202 Method 204 5 g's for 20 min., 12 cycles each of 3 orientations, 10-2000 Hz |
ESD | Δ R± 0.5% | AEC-Q200-002 Human body model 2KV |
Resistance to solvents | Marking Unsmeared | MIL-STD-202 Method 215 Add Aqueous wash chemical - OKEM Clean or equivalent. Do not use banned solvents. |
Flammability | No ignition of the tissue paper or scorching or the pinewood board | UL-94 V-0 or V-1 are acceptable. Electrical test not required. |
Sulfur Test | Δ R± 01% | ASTM-B-809-95 Modified 105±2℃ no power rating for 750 hrs. |
RCWV (Rated continuous working voltage)= √(P x R) or Max. Operating voltage whichever is lower.
☑ Storage Temperature: 15 ~ 28°C; Humidity < 80%RH
☑ Shelf Life: 2 years from production date.
Packing Quantity & Reel Specifications (Unit :mm)
Type | ØA | ØB | ØC | W | T | Paper Type(EA) | Emboss Plastic Tape(EA) | |
---|---|---|---|---|---|---|---|---|
ARHV06 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - | |
ARHV13 | 178.0±1.0 | 60.0+1.0 | 13.5±0.7 | 9.5±1.0 | 11.5±1.0 | 5,000 | - |
Paper Tape Specifications
Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ØD0 (mm) | T (mm) |
---|---|---|---|---|---|---|---|---|---|---|
ARHV06 | 2.00 ± 0.05 | 3.55 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.50 ± 0.05 | 4.00 ± 0.05 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.55 ± 0.05 | 0.75 ± 0.05 |
ARHV13 | 2.75 ± 0.05 | 3.40 ± 0.05 | 8.00 ± 0.10 | 1.75 ± 0.05 | 3.50 ± 0.05 | 4.00 ± 0.05 | 4.00 ± 0.10 | 2.00 ± 0.05 | 1.60 ± 0.10 | 0.75 ± 0.05 |
■ Peel force of top cover tape.
■ The peel speed shall be about 300mm/min ± 5%.
■ The peel force of top cover tape shall be between 8gf to 60gf.
Thin film Precision resistor 0.01%, TC2ppm, wirebondale, Anti-Crossive, MELF. Current sensing, Metal...
Read MoreCeramic high frequency chip inductors, small size to 01005. Thin film, multilayer, wirewound , ferrite...
Read MoreMultilayer Ceramic capacitor offers high Voltage, high frequency, low noise, High Q, Low TCR. NPO, X7R,...
Read More