![APPLICATIONS AUTOMOBILES](https://cdn.ready-market.com.tw/cdb12976/Templates/pic/m/Promotion-Application-01.jpg?v=34c833ab)
APPLICATIONS AUTOMOBILES
Résistance de précision à film mince 0,01%, TC2ppm, wirebondale, anti-corrosion, MELF. Détection...
Lire la suiteInducteur de puissance CMS blindé, compact, profil bas avec une faible résistance DCR et un courant élevé, avec blindage magnétique contre les radiations.
PCDR Series1275 ±30% 5.6μH 0.0116 Ω 7.8A
Taille | Tolérance | Inductance | Condition de test | DCR (Ω) max. | IDC (A) |
---|---|---|---|---|---|
1275 | ±30% | 5.6 | 1KHz, 0.5V | 0.0116 | 7.8 |
Type | Tape Size | Parts Per Reel | |
---|---|---|---|
W | P | 13" | |
PCDR0628 | 16 | 12 | 1000 |
PCDR0728 | 16 | 12 | 1000 |
PCDR0730 | 16 | 12 | 1000 |
PCDR0732 | 16 | 12 | 1000 |
PCDR0745 | 16 | 12 | 1000 |
PCDR1045 | 24 | 16 | 750 |
PCDR1255 | 24 | 16 | 500 |
PCDR1265 | 24 | 16 | 500 |
PCDR1275 | 24 | 16 | 350 |
General
Item | Specification |
---|---|
Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: < 80% relative humidity. Recommended product should be used within 12 months from the time of delivery. |
Environmental Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
Low temperature Storage test | Temperature -40 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
Item | Specification | Test Conditions / Test Methods |
---|---|---|
Solderability test | Terminal area must have 90% minimum solder coverage. | Product with Lead-free terminal: Dip pads in flux then dip in solder pot at 245 ± 5°C for 3 seconds. |
Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
The Condition Of Reflow (Recommendation):
Résistance de précision à film mince 0,01%, TC2ppm, wirebondale, anti-corrosion, MELF. Détection...
Lire la suiteInducteurs céramiques haute fréquence, de petite taille jusqu'à 01005. Inducteur à film mince, multicouche,...
Lire la suiteLe condensateur céramique multicouche offre une haute tension, une haute fréquence, un faible bruit,...
Lire la suite