APPLICATIONS AUTOMOBILES
Résistance de précision en couche mince 0,01%, TC2ppm, wirebondale, Anti-Corrosif, MELF. Détection...
Lire la suiteInductance de puissance CMS blindée (Série PCDR PCDR0745MT3R3)
PCDR0745MT3R3
Inducteur de puissance CMS blindé, compact, profil bas avec une faible résistance DCR et un courant élevé, avec blindage magnétique contre les radiations.
PCDR Series0745 ±20% 3.3μH 0.02 Ω 2.5A
| Taille | Tolérance | Inductance | Condition de test | DCR (Ω) max. | IDC (A) |
|---|---|---|---|---|---|
| 0745 | ±20% | 3.3 | 1KHz, 0.5V | 0.02 | 2.5 |
Spécifications de bande et de bobine (Unité : mm)
| Type | Tape Size | Parts Per Reel | |
|---|---|---|---|
| W | P | 13" | |
| PCDR0628 | 16 | 12 | 1000 |
| PCDR0728 | 16 | 12 | 1000 |
| PCDR0730 | 16 | 12 | 1000 |
| PCDR0732 | 16 | 12 | 1000 |
| PCDR0745 | 16 | 12 | 1000 |
| PCDR1045 | 24 | 16 | 750 |
| PCDR1255 | 24 | 16 | 500 |
| PCDR1265 | 24 | 16 | 500 |
| PCDR1275 | 24 | 16 | 350 |
Spécifications environnementales de l'inducteur de puissance CMS
General
| Item | Specification |
|---|---|
| Shelf Storage conditions | Temperature range: 15 ~ 28°C; Humidity: < 80% relative humidity. Recommended product should be used within 12 months from the time of delivery. |
Environmental Test
| Item | Specification | Test Conditions / Test Methods |
|---|---|---|
| High temperature Storage test | No case deformation or change in appearance. Δ L/L ≤10% |
Temperature 85 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
| Low temperature Storage test | Temperature -40 ± 2°C, Time: 48 ± 2 hours, Tested after 1hour at room temperature. |
|
| Humidity test | Temperature 40 ± 2°C, 90 ~ 95% relative humidity Time: 96 ± 2 hours Tested after 1hour at room temperature. |
|
| Thermal shock test | First -25°C 30minutes then 25°C 10 minutes last 85°C 30 minutes, as 1 cycle. Go through 5 cycles. Tested after 1 hour at room temperature. |
Mechanical Test
| Item | Specification | Test Conditions / Test Methods |
|---|---|---|
| Solderability test | Terminal area must have 90% minimum solder coverage. | Product with Lead-free terminal: Dip pads in flux then dip in solder pot at 245 ± 5°C for 3 seconds. |
| Resistance to Soldering Heat | No case deformation or change in appearance. | Flux should cover the whole of the sample before heating, then be preheated for about 2 minutes over temperature of 130 ~ 150°C. Immersing to 260 ± 5°C for 10 seconds. |
| Vibration test | No case deformation or change in appearance. Δ L/L ≤10% |
Apply frequency 10 ~ 55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours. |
| Shock resistance | Drop down with 981m/s² (100G) shock attitude upon a rubber block method shock testing machine, for 1 time. In each of three orientations. |
Reflux
The Condition Of Reflow (Recommendation):
Code
- 3R3
- Téléchargement de fichiers
-
-
Produit principal
APPLICATIONS MÉDICALES
Inductances céramiques haute fréquence, petite taille jusqu'à 01005. Film mince, multicouche, bobinées,...
Lire la suite
APPLICATIONS DE COMMUNICATION
Le condensateur multicouche en céramique offre une haute tension, une haute fréquence, un faible bruit,...
Lire la suite