APPLICATIONS AUTOMOBILES
Résistance de précision en film mince 0,01 %, TC2ppm, wirebondale, anti-corrosion, MELF. Détection...
Lire la suiteRésistance de type chip de grade automobile à faible résistance (bande métallique) (Série LRP..A LRP12DTCSR050A)
LRP12DTCSR050A
Résistance de type chip de grade automobile à faible résistance (bande métallique) (Série LRP..A LRP12DTCSR050A) Files Download
Résistance de puce à faible ohm (bande métallique) de qualité automobile - Série LRP..A
LRP..A Series2512 ±0.5% 25 2W Series50Ω 4K/Reel
| Taille | Tolérance | TCR (ppm /℃) | Puissance | Résistance (Ohm) | Emballage |
|---|---|---|---|---|---|
| 2512 | ±0.5% | 25 | 2W | 50 | 4K/Reel |
Caractéristiques environnementales
| Item | Requirement | Test Method |
|---|---|---|
| Temperature Coefficient of Resistance (T.C.R.) |
As Spec. | IEC60115-1 4.8 JIS-C-5201-1 4.8 -55°C~+125°C, 25°C is the reference temperature |
| Short Time Overload | ±1.0% | IEC60115-1 4.13 JIS-C-5201-1 4.13 5*rated power for 5 seconds |
| Insulation Resistance | ³10G | IEC60115-1 4.6 JIS-C-5201-1 4.13 100V DC for 1 minute |
| Endurance | ±1.0% | IEC60115-1 4.25 JIS-C-5201-1 4.25.1 70±2°C, rated power for 1000 hrs with 1.5 hrs “ON” and 0.5 hr “OFF” |
| Biased Humidity | ±1.0% | MIL-STD-202 Method 103 1000 hrs 85°C/85%RH 10% of operating power |
| Dry Heat | ±1.0% | IEC60115-1 4.23.2 JIS-C-5201-1 4.23.2 at +170°C for 1000 hrs |
| Bending Strength | ±1.0% | JIS-C-5201-1 4.33 IEC-60115-1 4.33 Bending width 2mm once for 5 seconds |
| Solderability | 95% min. coverage | JIS-C-5201-1 4.17 IEC-60115-1 4.17 245±5°C for 3 seconds |
| Resistance to Soldering Heat | ±0.5% | JIS-C-5201-1 4.18 IEC-60115-1 4.18 260±5°C for 10 seconds |
| Rapid Change of Temperature | ±1.0% | JIS-C-5201-1 4.19 IEC-60115-1 4.19 -55°C to +155°C, 5 cycles |
| Low Temperature Storage | ±1.0% | IEC60115-1 4.23.4 JIS-C-5201-1 4.23.4 at -55°C for 2 hrs |
RCWV(Rated Continuous Working Voltage)= √(P*R) or Max. Operating Voltage whichever is lower.
☑ Storage Temperature: 15~28°C; Humidity < 80%RH
Condition de soudage
(Reflow soldering only)
(1) Time of IR reflow soldering at maximum temperature point 260°C：10s
Emballage
Packing Quantity & Reel Specifications
| Type | Resistance (mΩ) | Packaging Quantity | Tape Width | Reel Diameter | ΦA (mm) | ΦB (mm) | ΦC (mm) | W (mm) | T (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|
| LRP06 | 8~20 | Paper | 5K | 8mm | 7 inch | 178.5±1.5 | 60+1/-0 | 13.0±0.2 | 9.0±0.5 | 12.5±0.5 |
| LRP 12 | 4~100 | Embossed | 4K | 12mm | 7 inch | 178.5±1.5 | 60±1.0 | 13.0±0.5 | 13.0±1.0 | 15.5±0.5 |
| LRP12 | 3 | Embossed | 2K | 12mm | 7 inch | 178.5±1.5 | 60±1.0 | 13.0±0.5 | 13.0±1.0 | 15.5±0.5 |
Embossed Plastic Tape Specifications
| Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ΦD0 (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| LRP12 | 3.50±0.10 | 6.70±0.10 | 12.0±0.30 | 1.75±0.10 | 5.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.50+0.1, -0 | 1.20+0 |
| LRP12(3mΩ) | 3.50±0.10 | 6.70±0.10 | 12.0±0.30 | 1.75±0.10 | 5.5±0.05 | 4.00±0.10 | 4.00±0.10 | 2.00±0.05 | 1.50+0.1, -0 | 1.45±0.20 |
Paper Tape Specifications
| Type | A (mm) | B (mm) | W (mm) | E (mm) | F (mm) | P0 (mm) | P1 (mm) | P2 (mm) | ΦD0 (mm) | T (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
| LRP06 | 1.90±0.10 | 3.50±0.20 | 8.0±0.20 | 1.75±0.10 | 3.50±0.05 | 4.00±0.10 | 4.00±0.05 | 2.00±0.05 | 1.50+0.1, -0 | 0.85±0.10 |
Code
- R050
- Téléchargement de fichiers
-
-
Fiche technique
Résistance de puce à faible ohm (bande métallique) de qualité automobile - Série LRP..A
-
Produit Principal
APPLICATIONS MÉDICALES
Inducteurs céramiques haute fréquence, de petite taille jusqu'à 01005. Film mince, multicouche, bobiné,...
Lire la suite
APPLICATIONS DE COMMUNICATION
Le condensateur céramique multicouche offre une haute tension, haute fréquence, faible bruit, haute...
Lire la suite