APPLICATIONS AUTOMOBILES
Résistance de précision en film mince 0,01 %, TC2ppm, wirebondale, anti-corrosion, MELF. Détection...
Lire la suiteBilles de puce multicouches (Série CBM CBM03YTAN751)
CBM03YTAN751
Perle de puce multicouche pour la protection EMI, faible résistance CC, résistance élevée à la chaleur de soudage, disponibilité de plusieurs tailles pour toutes sortes d'applications 4C, divers équipements électroniques.
CBM Series±25% 4K/REEL 0.35 Ω 750Ω 400mA
| Tolérance | Emballage | Condition de test | DCR (Ω) max. | Impédance (Ω) | Courant nominal (mA) max. |
|---|---|---|---|---|---|
| ±25% | 4K/REEL | 100MHz | 0.35 | 750 | 400 |
Caractéristiques environnementales
Electrical Performance Test
| Item | Specification | Test Method |
|---|---|---|
| Impedance | Refer to standard electrical spec. | HP4286A |
| DCR | HP 4338 digital mili-ohm meter |
Mechanical Performance Test
| Item | Specification | Test Method |
|---|---|---|
| Substrate Bending Test | Without deformation cases Impedance: within ± 30% of initial value DC Resistance shall be satisfied |
Test device shall be soldered on the substrate Substrate Dimension: 100 x 40 x 0.8mm Deflection: 3.0mm Keeping Time: 10sec and then return  |
| Vibration | Appearance: No damage Impedance: within ± 30% of initial value DC Resistance shall be satisfied |
Test device shall be soldered on the substrate Oscillation Frequency: 10 to 55 to 10Hz for 1min Amplitude: 1.5mm (peak-peak) Time: 2hrs for each axis (X, Y & Z), total 6hrs |
| Resistance to Soldering Heat | No visible damage Electrical characteristics and mechanical characteristics shall be satisfied |
Solder temp: 265 ± 5°C Immersion time: 6 ± 1sec Preheating: 100°C to 150°C, 1 minute Measured after exposure in the room condition for 24hrs Solder: Sn-3Ag-0.5Cu |
| Solderability | 95% min. coverage of all metabolized area | Solder Temperature: 240 ± 5°C Immersion Time: 3 ± 1sec Solder: Sn-3Ag-0.5Cu |
| Terminal Strength | Without deformation cases Impedance: within ± 30% of initial value DC Resistance shall be satisfied |
Solder chip on PCB and applied 10N (1.02Kgf) for 10 sec |
| Temperature Cycle | Appearance: No damage Impedance: within ± 30% of initial value DC Resistance shall be satisfied |
One cycle: One cycle/step1: -55 ± 3°C for 30 ± 3min step2: standard atmospheric conditions 5s or less step3:125 ± 2°C for 30 ± 3min step4: standard atmospheric conditions 5s or less Total: 100cycles Measured after exposure in the room condition for 24hrs |
| Humidity Resistance | Temperature: 60 ± 2°C Relative Humidity: 90 ~ 95% Applied Current: Rated Current(maximum value) Time: 1008 ± 12hrs Measured after exposure in the room condition for 24hrs |
|
| High Temperature Resistance | Temperature: 125 ± 2°C Applied Current: Rated Current(maximum value) Time: 1008 ± 12hrs Measured after exposure in the room condition for 24hrs |
|
| Low Temperature Storage Life Test | Temperature: -55 ± 2°C Time: 1008 ± 12hrs Measured after exposure in the room condition for 24hrs |
|
| Thermal Shock | -55°C ~ 125°C kept stabilized for 30 minutes each for 100 cycles Measured after exposure in the room condition for 24hrs |
☑ Operating Temperature: -55°C ~ 125°C
☑ Storage Temperature: 15 ~ 28°C ; Humidity < 80%RH
Condition de soudage
(1) Time of IR reflow soldering at maximum temperature point 260°C: 10s
(2) Time of soldering iron at maximum temperature point 280°C: 3s
Emballage
| Type | Tape Dimensions | Reel Dimensions | Recommended Pattern | Quantity (EA) |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | T | W | P | F | K | Tape Type |
A | B | C | D | A | B | C | ||
| CBM01 | 0.38 | 0.68 | 1.10 | 8.0 | 2.0 | 3.5 | - | B | 178 | 60 | 10 | 2 | 0.25 | 0.69 | 0.32 | 15000 |
| CBM02 | 0.65 | 1.15 | 0.80 | 8.0 | 2.0 | 3.5 | - | B | 178 | 60 | 10 | 2 | 0.50 | 2.10 | 0.55 | 10000 |
| CBM03 | 1.10 | 1.90 | 1.10 | 8.0 | 4.0 | 3.5 | - | B | 178 | 60 | 10 | 2 | 0.60 | 2.60 | 0.80 | 4000 |
| CBM05 | 1.55 | 2.30 | 1.20 | 8.0 | 4.0 | 3.5 | - | B | 178 | 60 | 10 | 2 | 0.66 | 3.23 | 1.47 | 4000 |
| CBM04 | 1.90 | 3.50 | 1.40 | 8.0 | 4.0 | 3.5 | 0.2 | A | 178 | 60 | 10 | 2 | 2.20 | 4.40 | 2.06 | 3000 |
| CBM10 | 2.90 | 3.60 | 1.70 | 8.0 | 4.0 | 3.5 | 0.2 | A | 178 | 60 | 10 | 2 | 2.13 | 4.06 | 2.74 | 2000 |
| CBM08 | 2.90 | 4.90 | 1.40 | 12 | 4.0 | 5.5 | 0.3 | A | 178 | 60 | 14 | 2 | 2.70 | 5.70 | 2.24 | 2000 |
| CBM12 | 3.60 | 4.90 | 2.05 | 12 | 8.0 | 5.5 | 0.3 | A | 178 | 60 | 14 | 2 | 2.57 | 5.90 | 4.22 | 1000 |
| CBM20 | 5.40 | 5.95 | 3.42 | 12 | 8.0 | 5.5 | 0.33 | A | 330 | 100 | 14.5 | 2 | 3.05 | 9.19 | 6.1 | 2000 |
- Téléchargement de fichiers
-
-
Produit Principal
APPLICATIONS MÉDICALES
Inducteurs céramiques haute fréquence, de petite taille jusqu'à 01005. Film mince, multicouche, bobiné,...
Lire la suite
APPLICATIONS DE COMMUNICATION
Le condensateur céramique multicouche offre une haute tension, haute fréquence, faible bruit, haute...
Lire la suite