最新讯息

光頡科技是高精度车用电组, 薄膜电阻, 厚膜电阻, 积层电容及电感的专业制造商

新产品讯息

产品讯息

结果 1 - 21 的 21
03Sep 2024
Current Sensing Metal Chip Resistor (Wide Terminal)-CSMW Series

Long-side termination (reverse-geometry) type flat chip resistor. Viking has been manufacturing Wide Terminal products for many years and is dedicated to developing a variety of Wide Terminal products. By changing the terminal electrode from the short edge to the long edge, we can enhance heat dissipation to the PCB and improve high power rating. The wide electrode construction supports good thermal cycling performance. The metal foil construction ensures stable low TCR performance and is Pb-Free to meet RoHS requirements.

阅读更多
08Jun 2023
Automotive Grade Metal Thin Film Chip Resistor –ARM..A series

ARM..A series The advanced thin film resistor with special process to ensure the life stability and resistant to moisture. Biased humidity testing at 85 °C /85% and 155°C high temperature exposure tested. High Temperature Power Derating started from 85°C. Wide resistance range up to 5.1Mohm and provide good performance of high power and high voltage.

阅读更多
26Sep 2022
Automotive Thick Film Flat Array Chip Resistor –CNF..A series

Resistor Array is composed of several independent chip resistors. It limits the current and stabilizes the voltage. It can be used as pull-up and pull-down resistors for parallel ports, simplify the PCB design and assembly. Save board space or increase PCB integration density and reduce pick and place costs.   CNF ..A series products are flat type between the terminals (no convex or concave design) so they are strong in mechanical strength and are extremely resistant to damage, so usable space can be added to the design, which increases the effective area of the resistor body, so that is better electrical characteristics. Same land patterns as concave or convex type. No need to redesign on PCB. High power is available.

阅读更多
05Sep 2022
Important products: Tantalum Nitride (TaN) Thin Film Precision Chip Resistor -TAR Series

The TaN (tantalum nitride) film is a moisture impervious tantalum pentoxide barrier layer that can against high relative humidity. TaN is much robust withstand high humidity with voltage applied than NiCr. It can pass thousands biased humidity testing at 85 °C /85% relative humidity . it produces a very stable, protective oxide layer, an ideal choice for a wide range of applications requiring precision resistors with long term stability, reliability, and critical environmental.

阅读更多
01Sep 2022
High Power Thin Film Chip Resistors 1206 1W-ARP Series

High Power Thin Film Chip Resistors 1206 1W

阅读更多
08Aug 2022
Thin film high voltage-ARHV..A series

Thin film high voltage-ARHV..A series * 1206,1210 Offer up to 700V-1000V voltage and provide long-term stability with special passivation. * ±25ppm/°TCR and ±0.1% resistance tolerance. * Resistance upto 3MΩ   Greatly reduce the number of thin film resistor for high Voltage Greatly reduce SMD costs , Saving PCB space or increase PCB integration density Higher application reliability by reducing the number of solder joints

阅读更多
04Mar 2022
High Frequency upto 40GHz thin film precision resistor-ARF series

ARF series chip resistors are designed with low internal reactance. The thin film technology applied to resistors is appropriated to reduce the parasitic inductance and capacitance. Low internal reactance allows these devices to keep a very good resistor behavior in high frequencies. Applications

阅读更多
05Nov 2021
Long Termination Thick Film Resistor- CRW Series

The resistors are constructed in a ceramic based (aluminum oxide). Long-side termination (reverse-geometry) type flat chip resistor, robust design is major concern, provide a shorter path for heat dissipation to the PCB, enhance high power rating, Wide electrode construction supports good thermal cycling performance. The composition of the paste is adjusted to give the approximate resistance required and is trimmed to nominated value by laser trimmer.

阅读更多
12Oct 2021
Ultra Low Resistance Metal Alloy Jumper-LRJ series

Metal alloy 0 ohm jumper resistor for ultra low resistance under 0.5mohm for sizes of 0402~0805, under 0.2mohm for sizes of 1206,2010 withstand high temperature for high current applications. Our LRJ seires is true metal alloy plate zero ohm resistor , a good choice of less space and low cost than DIP jumper headers. This Metal jumper is designed to extremely low impedance and profile circuit linkage as a zero ohm resistor.

阅读更多
06Sep 2021
Thick Film High Power Chip Resistor - Aluminum Nitride Substrate(ALN) –CRP Series

CRP series thick film resistor is designed on high thermal conductivity aluminum nitride substrate with enlarged backside terminations to reduce the thermal resistance between the topside resistor layer and the solder joint on the end users' circuit assembly. It offers effiectively heat dissipation to remove the heat to the overall performance of the devices. Enhance over 3 times more power in same size , Excellent reliability and stability. It offers High Thermal Conductivity for Power to 22 W with temperature control in 2512 Case ..

阅读更多
20Aug 2021
New Product CSRF Series- MELF High Frequency Resistor

CSRF series is a MELF resistor specially designed for high frequency applications. The general type MELF resistor uses a spiral trimming method to increase the internal inductance, CSRF uses a special non-spiral trimmed method reduced the internal reactance which caused the impedance change when the resistor used in high frequency applications, so it is very suitable for high frequency circuit design.

阅读更多
15Mar 2021
Long Termination Thick Film Resistor- CRW ..A Series

The resistors are constructed in a ceramic based (aluminum oxide). Long-side termination (reverse-geometry) type flat chip resistor, robust design is major concern, provide a shorter path for heat dissipation to the PCB, enhance high power rating, Wide electrode construction supports good thermal cycling performance. The composition of the paste is adjusted to give the approximate resistance required and is trimmed to nominated value by laser trimmer.

阅读更多
15Mar 2021
Anti-sulfur Components

Anti-Surfur resistor is using high sulfuration-proof inner electrode material and special construction of termination to increase the strength to against the sulfuration. Sulfuration occurs in the resistor with silver for inner electrode. Sulfurated environment is included as sulfur gas near hot spring or volcanos or produced through firing of raw oil, even outdoor equipment under air pollution could be affected. Silver sulfide produced through this reaction impacts the conductivity therefore resistor gets disconnected.   Viking 's Anti-sulfurated resistors are an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.   Product applications:automotive electronic components, power supplies, industrial equipment, petrochemical industry electronic equipment, network servers, sulfur detectors, telecom stations, sewage treatment facilities, etc.

阅读更多
14Sep 2020
New Product Anti-Sulfur Resistor Array (AS43/ 42/ 41/ 21 Series)

Chip Resistor Array (R Network) is single packaged device containing an array of homogeneous resistor elements. Resistor array is typically used for convenience and cost or space saving when several same resistors applied in a layout. The size can be as small as 0201,4P2R or 8P4R. AS43,AS42,AS41,AS21 Resistor Arry is using special construction of termination to increase the strength to against the sulfuration. Silver sulfide produced due to high Sulfur environment that impacts the conductivity, therefore resistor gets disconnected. Viking 's Anti-sulfurated resistor array is an ideal choice to prevent your electronic devices being damaged from the high –sulfur environment.

阅读更多
29Jun 2020
New Product ARN Series

ARN Series Chip resistors are designed on high thermal conductivity Aluminum Nitride substrate with enlarged backside terminations to reduce the thermal resistance. As with any high power chip resistor has good ability to remove the heat to the overall performance of the devices. Aluminum Nitride Precision Thin Film Chip Resistor-ARN Series ● High thermal conductivity aluminum nitride substrate ● High-power resistors 1206 up to 2 watts, 2512 6W soon is coming ● Offer 2x the power rating over traditional thin-film chip resistors ● Designed with enlarged backside terminations to reduce the thermal resistance ● Low TC down to 25 ppm/C ,Tight tolerance to 0.1% Please consult with us for the new product.

阅读更多
29Jun 2020
New Product 4T Series

Metal Foil is special designed for 4 terminations, Kelvin design , surface-mount ,High power and Tight Tolerance of 0.5% for critical current sensing design. This resistor covers the most widely used resistance range from 10m~20m. This technology offers an excellent Temperature Coefficient of Resistance (TCR) and high reliable, accurate current detection. Four Terminal High Precision Current Sense Resistors-4T Series

阅读更多
15Jan 2020
New Product TAR Series

Tantalum Nitride Thin Film Resistor Chip Resistor-TAR Series

阅读更多
15Jan 2020
New Product CSRA Series

Automotive Grade Metal Film Precision MELF Resistor-CSRA series

阅读更多
15Jan 2020
New Product AR Series

Thin Film Precision Chip Resistor-AR2512 10PPM 1W

阅读更多
15Jan 2020
New Product PWR Series

Pulse Withstanding Chip Resistor-PWR Upgrade Power Rating

阅读更多
15Jan 2020
New Product SWR Series

Surge Withstanding Chip Resistor-SWR Upgrade Power Rating

阅读更多
结果 1 - 21 的 21

产品规格料号搜寻(英文)

光頡科技拥有近百万笔产品资料供应给国内外厂商使用,为了加速找到您采购合适的产品,现在您可透过规格、料号、替代品料号的搜寻方式来快速找到适合的产品。   注:本搜寻介面主要以英文提供给您查询。

立即前往

选单

最佳推荐

光頡公司简介

光頡科技股份有限公司是台湾一家专业在薄膜电阻, 厚膜电阻, 积层电容及电感的专业制造商的制造服务商。成立于西元1997年并拥有超过25年的薄膜精密电阻, 电流检测电阻, 陶瓷芯片电感, 功率电感, MELF薄膜电阻制造经验,光頡总是可以达到客户各种品质要求。


应用

汽车应用

汽车应用

IATF‐16949认证生产现场。符合AEC-Q200。具有VDA6.3的高可靠性,并已获得设备和员工的认证,可制造汽车产品

阅读更多
医疗应用

医疗应用

Viking拥有通过ISO13485认证的先进技术,可制造医疗应用的高等级电阻器

阅读更多
通讯应用

通讯应用

关键的通信应用是智能手机,SMPS电信电源,用户线卡,无线基站

阅读更多