APPLICATIONS AUTOMOBILES
Résistance de précision en film mince 0,01 %, TC2ppm, wirebondale, anti-corrosion, MELF. Détection...
Lire la suiteCondensateur céramique multicouche, MLCC, condensateur en puce pour différentes tailles et matériaux pour prendre en charge une large gamme de capacités, taille extrêmement compacte, faible inductance et haute fréquence, excellente aptitude au soudage et résistance à la soudure, faible ESR, adaptable à tous types d'applications. Conforme à la norme EIAJ-RC3402 et également compatible avec EIA-RS198 et IEC PUB. 384-10.
MC Series0201 ±0.1pF 15K/Reel NPO 0.6pF 50V
Taille | Tolérance | Emballage | Dielectrique | Capacité (pF) | Tension (V) |
---|---|---|---|---|---|
0201 | ±0.1pF | 15K/Reel | NPO | 0.6 | 50 |
Capacitance & Voltage
Dielectric | NPO | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EIA | Size | 0201 | 0402 | 0603 | 0805 | |||||||||||
Code | VDCW | 6.3V | 10V | 25V | 50V | 25V | 50V | 100V | 200V | 50V | 100V | 250V | 50V | 100V | 250V | 500V |
0R1 | 0.1pF | L | L | L | L | N | N | N | N | |||||||
0R2 | 0.2 | L | L | L | L | N | N | N | N | |||||||
0R3 | 0.3 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R4 | 0.4 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R5 | 0.5 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R6 | 0.6 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R7 | 0.7 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R8 | 0.8 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
0R9 | 0.9 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
1R0 | 1.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
1R2 | 1.2 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
1R5 | 1.5 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
1R8 | 1.8 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
2R0 | 2.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
2R2 | 2.2 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
2R7 | 2.7 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
3R0 | 3.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
3R3 | 3.3 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
3R9 | 3.9 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
4R0 | 4.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
4R7 | 4.7 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
5R0 | 5.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
5R6 | 5.6 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
6R0 | 6.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
6R8 | 6.8 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
7R0 | 7.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
8R2 | 8.2 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
9R0 | 9.0 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
100 | 10 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
110 | 11 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
120 | 12 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
130 | 13 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
150 | 15 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
160 | 16 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
180 | 18 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
200 | 20 | L | L | L | L | N | N | N | N | S | S | S | T | T | T | T |
220 | 22 | L | L | L | N | N | N | N | S | S | S | T | T | T | T | |
240 | 24 | L | L | L | N | N | N | N | S | S | S | T | T | T | T | |
270 | 27 | L | L | L | N | N | N | N | S | S | S | T | T | T | T | |
300 | 30 | L | L | L | N | N | N | N | S | S | S | T | T | T | T | |
330 | 33 | L | L | L | N | N | N | S | S | S | T | T | T | T | ||
360 | 36 | N | N | N | S | S | S | T | T | T | T | |||||
390 | 39 | N | N | N | S | S | S | T | T | T | T | |||||
430 | 43 | N | N | N | S | S | S | T | T | T | T | |||||
470 | 47 | N | N | N | S | S | S | T | T | T | T | |||||
560 | 56 | N | S | S | S | T | T | T | T | |||||||
680 | 68 | N | S | S | S | T | T | T | T | |||||||
820 | 82 | N | S | S | S | T | T | T | ||||||||
101 | 100 | N | S | S | S | T | T | T |
The letter in cell is expressed the symbol of product thickness.
Electrical Data
Dielectric | NPO |
---|---|
Size | 0201, 0402, 0603, 0805 |
Capacitance* | 0201: 0.1pF ~ 33pF , 0402: 0.1pF ~ 100pF 0603: 0.3pF ~ 100pF , 0805: 0.3pF ~ 100pF |
Capacitance tolerance** | Cap ≦ 5pF: A (± 0.05pF), B (± 0.1pF), C (± 0.25pF) 5pF<Cap<10pF: B (± 0.1pF), C (± 0.25pF) , D (± 0.5pF) Cap ≧ 10pF: F (± 1%), G (± 2%), J (± 5%) |
Rated voltage (VDCW) | 6.3V, 10V, 25V, 50V, 100V, 250V, 500V |
Q * | Cap ≧ 30pF: Q ≧ 1000, Cap<30pF: Q ≧ 400+20C; |
Insulation resistance at Ur | ≧ 10GΩ |
Operating temperature | -55 to +125°C |
Capacitance | ± 30 ppm; 0201 Cap ≧ 22pF, ± 60 ppm |
Termination | Ni / Sn (lead-free termination) |
☑ '*' Measured at the conditions of 25°C ambient temperature and 30 ~ 70% related humidity.
☑ Apply 1.0 ± 0.2Vrms, 1.0MHz ± 10% for Cap ≦ 1000pF; 1.0KHz ± 10% for Cap>1000pF.
Electrical Characteristics
Item | Requirement | Test Method | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
External Appearance | No defects which may affect performance | Visual inspection & Dimension measurement | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Capacitance(Cap.) | Within the specified tolerance that refers on page2 | NPO: (Class I) Cap ≤ 1000pF 1.0 ± 0.2Vrms, 1MHz ± 10% Cap>1000pF 1.0 ± 0.2Vrms, 1KHz ± 10% X7R, X5R, Y5V: (Class II) Cap ≤ 10uF 1.0 ± 0.2Vrms, 1KHz ± 10%** Cap>10uF 0.5 ± 0.2Vrms, 120Hz ± 10% ** Test condition: 0.5 ± 0.2Vrms,1KHz ± 10% X7R: 0805=106(6.3V, 10V), 0603/475 (6.3V) X5R: 0201 ≧ 224 (6.3V, 10V, 16V)#1 0402 ≧ 475 (6.3V, 16V), 0402 ≧ 225 (10V) 0603=106 (6.3V, 10V), #1 Excluding X5R / 0201 / 105 (6.3V); 225 (10V), (1.0 ± 0.2Vrms, 1KHz ± 10%) *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dissipation Factor (D.F.) or Quality factor (Q=1/D.F.) |
NPO: Cap ≥ 30pF, Q ≥ 1000; Cap<30pF, Q ≥ 400+20C X7R, X5R:
Y5V:
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dielectric Strength | No evidence of damage or flash over during test | To apply voltage (≤ 100V) 250% Duration: 1 to 5sec Charge and discharge current less than 50mA To apply voltage: 200V ~ 300V ≧ 2 time VDC 500V ~ 999V ≧ 1.5 time VDC 1000V ~ 3000V ≧ 1.2 time VDC Cut-off, set at 10mA TEST=15 sec. RAMP=0 |
Item | Requirement | Test Method | ||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Insulation Resistance | 10GΩ or R x C ≧ 500Ω-F Whichever is smaller X7R, X5R, Y5V:
|
To apply rated voltage for max. 120sec *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
||||||||||||||||||||||||||||||||||||||||||||||
≧ 10GΩ or 100Ω-F whichever is smaller Rated voltage: 200V ~ 630V |
To apply rated voltage (500V max.) for 60sec. | |||||||||||||||||||||||||||||||||||||||||||||||
≧ 10GΩ Rated voltage: >630V |
To apply 500V for 60sec. | |||||||||||||||||||||||||||||||||||||||||||||||
Temperature Characteristic of Capacitance |
|
With no electrical load.
*Before initial measurement (Class II only):
|
||||||||||||||||||||||||||||||||||||||||||||||
Adhesive Strength of Termination | No remarkable damage or removal of the terminations | Pressurizing force: 0201: 2N 0402 & 0603: 5N > 0603: 10N Test time: 10 ± 1 sec |
||||||||||||||||||||||||||||||||||||||||||||||
Vibration Resistance | No remarkable damage Cap change and Q/D.F.: To meet initial spec | Vibration frequency: 10 ~ 55Hz/min Total amplitude: 1.5mm Test time: 6hrs. (two hrs each in three mutually Perpendicular directions.) *Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. *Cap./DF(Q) Measurement to be made after de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
||||||||||||||||||||||||||||||||||||||||||||||
Solderability | 95% min. coverage of all metalized area. | Solder temperature: 235 ± 5°C Dipping time: 2 ± 0.5 sec. |
Item | Requirement | Test Method | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bending Test | No remarkable damage. Cap change: NP0: within ± 5% or 0.5pF whichever is larger X7R, X5R, X6S, X7S: within ± 12.5% Y5V: within ± 30% (This capacitance change means the change of capacitance under specified flexure of substrate from the capacitance measured before the test.) |
The middle part of substrate shall be pressurized by means of the pressurizing rod at a rate of about 1 mm per second until the deflection becomes 1 mm and then the pressure shall be maintained for 5 ± 1 sec. * Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. Measurement to be made after keeping at room temp. for 24 ± 2 hrs. |
|||||||||||||||
Resistance to Soldering Heat | No remarkable damage. Cap change: NP0: within ± 2.5% or 0.25pF whichever is larger X7R, X5R, X6S, X7S: within ± 7.5% Y5V: within ± 20% Q/D.F., I.R. and dielectric strength: To meet initial requirements. 25% max. leaching on each edge |
Solder temperature: 260 ± 5°C Dipping time: 10 ± 1 sec Preheating: 120 to 150°C for 1 minute before immerse the capacitor in a eutectic solder. * Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp |
|||||||||||||||
Temperature Cycle | No remarkable damage. |
Conduct the five cycles according to the temperature and time.
Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
Item | Requirement | Test Method | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Humidity (steady state) | No remarkable damage. Cap change: NP0: within ± 5% or 0.5pF whichever is larger X7R, X5R: ≥ 10V**,within ± 12.5%; ≦ 6.3V within ± 25%;C ≥ 1μF,within ± 25% **10V: 0603 ≧ 4.7μF;0402 ≧ 1μF;0201 ≧ 0.1μF, within ± 25%; Y5V: ≥ 10V, within ± 30%; ≦ 6.3V, within +30 / -40% Q/D.F. value: NP0: More than 30pF Q ≥ 350, 10pF ≦ C ≦ 30pF, Q ≥ 275 + 2.5C Less than 10pF Q ≥ 200+10C X7R, X5R:
Y5V:
I.R.: ≥ 10V, 1GΩ or 50 Ω-F whichever is smaller.
|
Test temp.: 40 ± 2°C Humidity: 90 ~ 95%RH Test time: 500 + 24 / -0hrs. Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
Item | Requirement | Test Method | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Humidity load | No remarkable damage. Cap change: NP0: ± 7.5% or 0.75pF whichever is larger. X7R, X5R, X6S, X7S: ≥ 10V**,within ± 12.5%; ≦ 6.3V within ± 25%; TT series & C ≥ 1uF,within ± 25% **10V: 0603 4.7μF;0402 1μF;0201 ≧ ≧ ≧ 0.1μF, within ± 25%; Y5V: ≥ 10V, within ± 30%; ≦ 6.3V, within +30 / -40% Q/D.F. value: NP0: C ≥ 30pF,Q ≥ 200;C<30pF, Q ≥ 100+10 / 3C X7R, X5R:
Y5V:
I.R.: ≥ 10V, 500MΩ or 25 Ω-F whichever is smaller.
|
Test temp.: 40 ± 2°C Humidity: 90 ~ 95%RH Test time: 500 + 24 / -0 hrs. To apply voltage: Rated voltage (MAX. 500V) Before initial measurement (Class II only): To apply de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr then set for 24 ± 2 hrs at room temp. |
Item | Requirement | Test Method | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
High Temperature Load (Endurance) | No remarkable damage.
Y5V:
I.R.: ≥ 10V, 1GΩ or 50 Ω-F whichever is smaller.
|
Test temp.:
(6) 150% of rated voltage for below range
|
Packaging Quantity (Unit: mm)
Type | Thickness / Symbol | Packaging (7" Reel) | ||
---|---|---|---|---|
Paper Tape | Plastic Tape | |||
0201 | 0.30 ± 0.03 | L | 15K | - |
0.30 ± 0.05 | L | 15K | - | |
0.30 ± 0.09 | L | 15K | - | |
0402 | 0.50 ± 0.05 | N | 10K | - |
0.5+0.02/-0.05 | Q | 10K | - | |
0.50 ± 0.20 | E | 10K | - | |
0603 | 0.50 ± 0.10 | H | 4K | - |
0.80 ± 0.10 | S | 4K | - | |
0.80 +0.15 / -0.10 | X | 4K | - | |
0805 | 0.50 ± 0.10 | H | 4K | - |
0.60 ± 0.10 | A | 4K | - | |
0.80 ± 0.10 | B | 4K | - | |
0.85 ± 0.10 | T | 4K | - | |
1.25 ± 0.10 | D | - | 3K | |
1.25 ± 0.20 | I | - | 3K | |
1206 | 0.80 ± 0.10 | B | 4K | - |
0.85 ± 0.10 | T | 4K | - | |
0.95 ± 0.10 | C | - | 3K | |
1.15 ± 0.15 | J | - | 3K | |
1.25 ± 0.10 | D | - | 3K | |
1.60 ± 0.20 | G | - | 2K | |
1.60 +0.30 / -0.10 | P | - | 2K | |
1210 | 0.85 ± 0.10 | T | - | 3K |
0.95 ± 0.10 | C | - | 3K | |
1.25 ± 0.10 | D | - | 3K | |
1.60 ± 0.20 | G | - | 2K | |
2.00 ± 0.20 | K | - | 1K | |
2.50 ± 0.30 | M | - | 1K | |
2.50 ± 0.30 | M | - | 0.5K | |
1808 | 1.25 ± 0.10 | D | - | 2K |
1.10 ± 0.15 | F | - | 2K | |
1.60 ± 0.20 | G | - | 2K | |
2.00 ± 0.20 | K | - | 1K | |
1812 |
1.25 ± 0.10 | D | - | 1K |
1.60 ± 0.20 | G | - | 1K | |
2.00 ± 0.20 | K | - | 1K | |
2.50 ± 0.30 | M | - | 0.5K | |
2.80 ± 0.30 | U | - | 0.5K | |
0612 | 0.80 ± 0.10 | B | 4K | - |
Tape and Reel (Unit: mm)
Type | Chip Size | |||||||
---|---|---|---|---|---|---|---|---|
0201 | 0402 | 0603 | 0805 | 1206 0612 |
1210 | 1808 | 1812 | |
∅ C | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 | 13.0 ± 1.0 |
W | 9.0 ± 1.0 | 9.0 ± 1.0 | 9.0 ± 1.0 | 9.0 ± 1.0 | 9.0 ± 1.0 | 9.0 ± 1.0 | 13.5 ± 1.0 | 13.5 ± 1.0 |
∅ A | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") | 178 ± 1.0 (7") |
∅ B | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 60.5 ± 1.0 (7") | 80.0 ± 1.0 (7") | 80.0 ± 1.0 (7") |
Plastic Tape Size Specification (Unit: mm)
Type | 0805 | 1206 | 1210 | 1808 | 1812 | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thickness | D | I | C | J | D | G | P | T | C | D | G | K | M | D | F | G | K | D | F | G | K | M | U | |
A0 | <1.80 | <200 | <2.30 | <3.05 | <3.05 | <3.20 | <2.50 | <3.90 | ||||||||||||||||
B0 | <2.70 | <3.70 | <4.00 | <3.80 | <3.80 | <3.95 | <5.30 | <5.30 | ||||||||||||||||
T | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.23 ± 0.10 | 0.25 ± 0.10 | 0.25 ± 0.10 | ||||||||||||||||
K0 | <2.50 | <2.50 | <2.50 | <1.50 | <2.50 | <3.00 | <2.50 | <2.50 | <3.50 | |||||||||||||||
W | 8.00 ± 0.20 | 8.00 ± 0.20 | 8.00 ± 0.20 | 8.00 ± 0.20 | 8.00 ± 0.20 | 8.00 ± 0.20 | 12.0 ± 0.20 | 12.0 ± 0.20 | ||||||||||||||||
P0 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | ||||||||||||||||
P1 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 8.00 ± 0.10 | ||||||||||||||||
P2 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.10 | 2.00 ± 0.05 | ||||||||||||||||
D0 | 1.50 + 0.1/-0 | 1.50 ± 0.05 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | 1.50 + 0.1/-0 | ||||||||||||||||
D1 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.00 ± 0.10 | 1.50 ± 0.10 | 1.50 ± 0.10 | ||||||||||||||||
E | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | 1.75 ± 0.10 | ||||||||||||||||
F | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 5.50 ± 0.10 | 5.50 ± 0.10 |
Paper Tape Size Specification (Unit: mm)
Type | 0201 | 0402 | 0603 | 0805 | 1206 / 0612 | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Thickness | L | N | E | S | H | X | A | H | B | T | B | T |
A0 | 0.39 ± 0.07 | 0.70 ± 0.20 | 1.05 ± 0.30 | 1.50 ± 0.20 | 1.50 ± 0.20 | 1.90 ± 0.50 | ||||||
B0 | 0.69 ± 0.07 | 1.20 ± 0.20 | 1.80 ± 0.30 | 2.30 ± 0.20 | 2.30 ± 0.20 | 3.50 ± 0.50 | ||||||
T | ≦0.50 | ≦0.80 | ≦1.20 | ≦1.15 | ≦1.30 | ≦1.30 | ||||||
W | 8.00 ± 0.10 | 8.00 ± 0.10 | 8.00 ± 0.10 | 8.00 ± 0.10 | 8.00 ± 0.10 | 8.00 ± 0.10 | ||||||
P0 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | ||||||
P1 | 2.00 ± 0.05 | 2.00 ± 0.05 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | 4.00 ± 0.10 | ||||||
P2 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | 2.00 ± 0.05 | ||||||
D0 | 1.55 ± 0.05 | 1.55 ± 0.05 | 1.55 ± 0.05 | 1.55 ± 0.05 | 1.55 ± 0.05 | 1.50 ± 0.05 | ||||||
E | 1.75 ± 0.05 | 1.75 ± 0.05 | 1.75 ± 0.05 | 1.75 ± 0.05 | 1.75 ± 0.05 | 1.75 ± 0.10 | ||||||
F | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 | 3.50 ± 0.05 |
Résistance de précision en film mince 0,01 %, TC2ppm, wirebondale, anti-corrosion, MELF. Détection...
Lire la suiteInducteurs céramiques haute fréquence, de petite taille jusqu'à 01005. Film mince, multicouche, bobiné,...
Lire la suiteLe condensateur céramique multicouche offre une haute tension, haute fréquence, faible bruit, haute...
Lire la suite